1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
KE-HEATER
Câble chauffant à puissance constante maximale 260 °C 120-480 Vac
260 °C Max Constant Wattage Heating Cable 120-480 Vac
Modèles en stock
- Indice d’exposition continue jusqu’à 500°F
- Faible densité de puissance
- Résistance chauffante en parallèle
- Découpable à la longueur sur le chantier
KE-HEATER
À partir de
€
23,47
Modèles en stock
Aperçu du produit
- Longueur du câble 1 in
- Longueur de câble, max 202 in
- Matériau du câble Nickel ; cuivre
- Rigidité diélectrique 2500 V
- Matériau du fil chauffant Nichrome
- Isolation PFA de 20 mil
- Longueur du module 4 ft
- Température de fonctionnement, max 148 °C
- Température de fonctionnement Remarque Température d'exposition : 0 à 260 °C ; Température d'exposition à court terme : 287 °C
- Remarque concernant l'achat Utilisez la quantité pour indiquer la longueur de câble à acheter (par incréments de 1 pied), achat minimum de 25 pieds
- ID de série KE-HEATER
- Calibre du fil 12 AWG
- Épaisseur du fil 0.33 in
- Largeur du fil 0.225 in
The KE Cable heating element is tension wrapped and covered with two layers of nonflammable Polyimide Film applied in reverse directions, then heat fused for moisture protection. A stainless steel and tinned copper sheath is then added for additional protection and electrical ground return path. The sheath is enclosed in a minimum 20 mil PFA abrasion and chemical resistant extruded jacket.
OMEGALUX® KE Cable is a low Watt density electrical resistance heater. It is designed for freeze protection, viscosity and high temperature process control in Class 1, Groups B, C, and D, Division 2 Classified Areas as well as in corrosive environments. KE is used in asphalt plants, oil refineries, mines, chemical and petrochemical processing areas, other locations where corrosive atmospheres can occur. KE is equally suitable for applications in severe arctic cold.
CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.
OMEGALUX® KE Cable is a low Watt density electrical resistance heater. It is designed for freeze protection, viscosity and high temperature process control in Class 1, Groups B, C, and D, Division 2 Classified Areas as well as in corrosive environments. KE is used in asphalt plants, oil refineries, mines, chemical and petrochemical processing areas, other locations where corrosive atmospheres can occur. KE is equally suitable for applications in severe arctic cold.
CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.
PDF & Manuels