Skip to search Skip to main content Skip to navigation

India +91 8925807296 | Welcome to our new website, found an issue or bug? Please report it here
  1. Home
  2. See Calibration
  3. See Electrical Calibrators
  4. See Multifunction Calibrators
  5. Handheld Precision Current Loop Calibrator with 24 V Loop Power
We noticed you are in , please visit your local site by clicking the below link for regional offers and support.
Stay here.
Go to the site >
Handheld Precision Current Loop Calibrator with 24 V Loop Power
Click and hold to zoom

CL110-Calibrator

Handheld Precision Current Loop Calibrator with 24 V Loop Power

  • Best in Class Accuracy at 0.01% of Reading
  • Small Rugged Design Operates on 6 �AAA� Batteries (Included)
  • 24 Vdc Loop Power for mA Measure Mode
  • Intuitive Interface with Quick-Set Knob
Handheld Precision Current Loop Calibrator with 24 V Loop Power CL110-Calibrator CL110-Calibrator
Product Overview
  • Accuracy ± 0.01 %
  • Accuracy Detail ±0.01% rdg +2 LSD all ranges (@23 ±5°C)
  • Battery life 40 hr
  • Display Type LCD
  • Display Type Note 128 x 64 pixel LCD graphic display with backlight, 9 mm (0.34") high digits
  • Functions mA source, simulate, read or read with loop power, voltage read only
  • Height 30 mm
  • Length 150 mm
  • Loop Supply Limits Compliance Voltage: 24 Vdc @20 mA
  • Current, Max 0 to 24 mA
  • Operating Temperature, Max 55 °C
  • Operating Temperature, Min -10 °C
  • Over-Voltage Protection 240 Vac
  • Overcurrent Protection 28 mA DC
  • Relative Humidity 10 to 95% non-condensing
  • Resolution 1 uA
  • Resolution Note 1 uA on mA range and, 1 mV on voltage range
  • Series ID CL110-Calibrator
  • Supply Power Note 6 “AAA” batteries (alkaline, lithium or NiMH) included
  • Temperature Effect 20 ppm/°C from -10 to 18°C and 28 to 55°C
  • Voltage Note 0 to 30 Vdc
  • Weight 0.3 kg
  • Width 90 mm

Supported Applications

The Omega CL110 is a handheld precision loop calibrator designed for current measurement and sourcing, voltage measurement, valve testing, and HART communication support via a selectable 250 Ω loop resistor. The device supports output step and ramp functions to facilitate dynamic process verification.

Operating Conditions & Performance

The CL110 operates within an ambient temperature range of 0°C to 50°C with humidity ratings from 0% to 95% RH (non-condensing). Storage is supported between -20°C and 60°C. The instrument features a response time of 100 ms and provides accuracy values of ±0.01% of reading ± 0.005% of range for current measurements.

Measurement capabilities include:

  • Current Ranges: 4-20 mA, 0-20 mA
  • Voltage Ranges (Source/Measure): 0-24 VDC, 0-30 VDC
  • Resolution: 0.001 mA and 0.001 V
  • Load Resistance: Up to 1000 Ω

The unit is powered by six AAA batteries (installed) and includes a selectable 24V supply for loop power.

Configuration Options

  • Housing: Black rubberized plastic with an IP54 enclosure rating.
  • Dimensions: 100 mm (H) x 50 mm (W) x 30 mm (D).
  • User Interface: Large display, digital knob with selectable decade control, and interactive menus.
  • Safety Features: Input/output jacks protected by self-resetting fuses rated up to 240VAC; double insulated design.

Configuration Options

The series includes the following standard accessories and features as supplied:

  • Test leads with alligator clips for electrical connection.
  • Selectable HART 250 Ω loop resistor option.

Key Product Differences

The CL110 is offered in a single configuration (model CL110) within this series. The device integrates measurement and sourcing functions into one handheld unit, distinguishing it from separate source or measure-only instruments by combining current loop calibration with voltage capabilities and valve testing features.

en-IN
en_IN
Save Configuration