Skip to search Skip to main content Skip to navigation

Australia +61-2-4272 2055 | Welcome to our new website, found an issue or bug? Please report it here
  1. Home
  2. See Industrial Heaters
  3. See Duct & Enclosure
  4. See Enclosure Heaters
  5. Compact Enclosure Fan Heaters Up to 800 W
We noticed you are in , please visit your local site by clicking the below link for regional offers and support.
Stay here.
Go to the site >
Compact Enclosure Fan Heaters Up to 800 W
Click and hold to zoom

FCH-FGC2

Compact Enclosure Fan Heaters Up to 800 W

  • High Power Output to Small Size
  • Lightweight
  • Simple Installation
  • Screw Terminals for Easy Wiring
FCH-FGC2
From AUD 701.76
Shop Models
1 Variations available
See all series options below
FCH-FGC2Data Sheet

Data Sheet
Compact Enclosure Fan Heaters Up to 800 W FCH-FGC2 FCH-FGC2
Product Overview
  • Additional Features 1 Finger Guards at Inlet and Outlet
  • Air Flow rate 35 m³/h
  • Cross-Section 82 x 110 mm
  • Enclosure Ratings IP20
  • Fan Lifetime 43,500 hrs
  • Form factor DIN Clip for 35 mm
  • Operating Temperature, Max 50 °C
  • Operating Temperature, Min -40 °C
  • Series ID FCH-FGC2
  • Wire Gauge 16 AWG

Supported Applications

The Omega FCH-FGC2 Series consists of compact fan heaters designed for enclosure heating applications. These units utilize forced convection with Positive Temperature Coefficient (PTC) core elements encased in an aluminum heat sink and integrated fans to maximize heat dissipation within a small footprint.

Operating Conditions & Performance

The series operates across an ambient temperature range of -40 to 50 °C (-40 to 122 °F). Nominal power output is rated at 300/600W or 450/800W depending on the model, measured at 10°C (50°F). The units are designed for a nominal input voltage of 115/230 Vac. Maximum body temperature limits vary by power level: models rated at 300/600W reach a maximum of 55 °C, while those rated at 450/800W reach up to 80 °C.

Electrical characteristics include an Ingress Protection rating of IP20 and Electrical Protection Class I. Fan volumetric flow ranges from 31 to 35 m³/hour. The fan life time (L10) is specified at 43,500 hours when operating at 40°C.

Configuration Options

The FCH-FGC2 series offers configurable power and voltage options to match specific enclosure requirements. All models feature screw terminals for easy wiring and include finger guards at the inlet and outlet.

  • Power Levels: Available in 300/600W or 450/800W configurations (at 10°C).
  • Voltage Options: Configurable for 115 Vac or 230 Vac operation.
  • Mechanical Features: Includes DIN clip mounting and an aluminum heat sink construction with integrated fan airflow.

In-rush current specifications vary by voltage: typical maximum in-rush is 14 to 15 A RMS at 115 Vac, and 10 to 11 A RMS at 230 Vac. Recommended time-delay fuses are 5 Amps for the lower power models and 6 Amps for the higher power models.

Key Product Differences

The series is distinguished by four specific model numbers that combine power output, voltage rating, and mounting hardware:

  • FCH-FGC20002R: 300/600W, 115V, with DIN clip.
  • FCH-FGC20012R: 450/800W, 115V, with DIN clip.
  • FCH-FGC20022R: 300/600W, 230V, with DIN clip.
  • FCH-FGC20032R: 450/800W, 230V, with DIN clip.

All variants share identical physical dimensions of 82 x 110 mm (3.23 x 4.33 in) cross section and a length of 150 mm (5.91 in), weighing 785 g (27 oz). The series carries CE, UL, cUL, and RoHS approvals.

en-AU
en_AU
Save Configuration