검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

CDCN-961-Controller

전도도, 비저항 또는 TDS 컨트롤러

재고가 있는 모델
  • 공정 용액 및 수처리 응용 분야에서 전도도, 비저항 및 TDS를 모니터링합니다.
  • 메뉴 기반 프로그래밍
  • NEMA 4X (IP65) 보호
  • 프로그래밍 가능한 고/저 및 알람 릴레이
CDCN-961-Controller
시작 2,773,549 원
재고가 있는 모델
전도도, 비저항 또는 TDS 컨트롤러 CDCN-961-Controller CDCN-961-Controller
loading all models
제품 개요
  • 정확도 ± 1%
  • 케이블 길이 5 m
  • 보정 사양 참고 라인 저항 보상: 0.0 ~ 20.0 Ω
  • 셀 상수 K = 0.01, 0.1, 1, 10, 전도도 전극: K=1.0
  • 전도도 측정 0.000 ~ 3.000, 30.00, 300.0 μS/cm
  • 컷아웃 치수 93.5 x 93.5 mm
  • 데이터 인터페이스 RS485
  • 직경 136 mm
  • 디스플레이 유형 LCD
  • EMC 표준 EN 50081-1, EN 50082-1
  • 외함 등급 IP65, NEMA 타입 4X
  • 빈도 1~999시간 1~999초(청소 주기)
  • 높이 108 mm
  • 임피던스 600 Ω
  • 재료 흑연
  • 측정 범위 사양 참고 전도도: 0.000 ~ 3.000, 30.00, 300.0 μS/cm 저항률: 0.3 ~ 30.0 MΩcm TDS: 0.000 ~ 3.000, 30.00, 300.0 ppm, 시험 범위: 0 ~ 50.0 mS/cm
  • 릴레이 수 3
  • 작동 습도 10% ~ 95% RH
  • 작동 온도, 최대 50 °C
  • 최소 작동 온도 -10 °C
  • 출력 세부 정보 4~20 mA/600 Ω
  • 공정 온도, 최대 -0.5 °C
  • 최소 공정 온도 130 °C
  • 릴레이 사양 참고 3 SPST/250V 1A, 제어 히스테리시스 밴드: 0.1~10% FS
  • 저항률 측정 범위 0.3 ~ 30.0 MΩcm
  • 해상도 0.001/0.01/0.1 μS/cm
  • 시리즈 ID CDCN-961-Controller
  • 온도 정확도 ± 0.5 °C
  • 온도 해상도 0.1 °C
  • 온도 센서 유형 1000 Ω RTD
  • 무게 1650 g
  • 폭 100 mm

Supported Applications

The Omega CDCN-961 is a Conductivity Controller / Transmitter designed for separate conductivity and temperature measurement. It features a digital display, multiple setpoints, and configurable output signals intended for industrial process control applications.

Operating Conditions & Performance

The series supports a measurement range from 0.00 to 2000000000.0 μS/cm with a resolution of 0.01 μS/cm. Accuracy is specified as ±0.5% of reading ±0.5% of full scale, and repeatability is ±0.1% of full scale. The response time is listed at 0.5 s.

Operating conditions include an ambient temperature range of 0 to 50 °C and a process temperature range of -5 to 120 °C. Storage temperatures are rated from -20 to 70 °C. Humidity tolerance is 0 to 95% RH (non-condensing). The unit carries an IP65 enclosure rating, with ABS plastic housing material.

Key Performance Parameters

  • Measurement Range: 0.00 to 2000000000.0 μS/cm (configurable via P08)
  • Accuracy: ±0.5% of reading ±0.5% of full scale
  • Hysteresis: 0.1% of full scale
  • Pressure Rating: 0 to 10 bar (process)
  • Load Resistance: 0-600 Ω for analog outputs

Configuration Options

The CDCN-961 offers configurable output signals and setpoint management. The device supports the following electrical connections and signal types via terminal block connection.

Output Signals & Control Options

  • Analog Outputs: 4-20 mA, 0-20 mA, or 0-10 V (configurable in P03)
  • Relay Outputs: Relay 1 (SPDT), Relay 2 (SPDT), and Alarm Relay 3 (SPDT)

Housing & Installation

  • Dimensions: 96 mm x 96 mm x 110 mm
  • Enclosure Rating: IP65
  • Power Supply: 100-240 VAC, 50/60 Hz or 24 VDC
  • Electrical Connection: Terminal block

Configuration Parameters

The controller includes internal parameters for setup and calibration. Factory preliminary values include a temperature set-up (P01) of 25.0 °C, an offset set-up (P02) of 0.00 μS/cm, and control mode (P04) set to Auto.

Key Product Differences

The CDCN-961 series is identified by the model number guide "CDCN-961 - <Model Number>". The primary variation within this family involves the selection of measurement ranges and output configurations via internal parameter settings (P03, P05-P07). All units share the same physical dimensions, enclosure rating, and power supply options.

Approvals include CE certification. No specific wetted materials or sheath specifications are provided for this controller unit in the source documentation; these depend on the external probe selected by the user.

ko-KR
ko_KR
설정 저장