検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-32A

コンパクト1/32 DIN温度/プロセスコントローラ、デュアルディスプレイ&ユニバーサル入力

  • 大型デュアルディスプレイ
  • セルフチューン
  • ファジィロジック
  • ユニバーサル入力
  • ループブレーク保護
  • ピーク/バレー表示
  • パーセント出力表示
  • 照明付きキーパッド
  • 16セグメントランプ/ソーク機能
  • オート/マニュアルステーション機能
  • 4段階パスワード保護セキュリティレベル
Series-32A
販売元 ¥ 83,439
コンパクト1/32 DIN温度/プロセスコントローラ、デュアルディスプレイ&ユニバーサル入力 Series-32A Series-32A
loading all models
製品の概要
  • 精度 ± 0.25% スパン ± 1 最下位桁
  • 表示に関する注意事項 2つの4桁、7セグメント、0.259インチ高(6.35 mm)LED
  • 表示タイプ LED
  • エンクロージャーの定格 IP66, NEMA タイプ 4X
  • 入力制御信号 0から20 mA
  • 入力タイプ 熱電対、RTD、直流電圧または直流電流
  • メモリバックアップ 非揮発性
  • 取付方向 1/32 DIN
  • 桁数 4
  • 動作温度(最高) 131 °F
  • 動作温度(最低) 14 °F
  • 消費電力 最大5 VA
  • RTD入力範囲 JPt 100: -4~752 °F; Pt 100: -328~1562 °F; Ni 120: -112~572 °F; Cu 50: -58~302 °F
  • シリーズID Series-32A
  • 電源注記 100~240 Vac、公称、+10~15%、50~400 Hz、単相;132~240 Vdc、公称、+10~20%
  • 電源タイプ AC / DC
  • 供給電圧 100から240 Vac、132から240 Vdc
  • 温度センサーの種類 RTDまたは熱電対
  • 熱電対入力範囲に関する注記 タイプK:-328~2372°F;タイプJ:-148~2192°F;タイプT:-328~752°F;タイプE:32~1112°F;タイプW:-328~2372°F;タイプR:32~3092°F;タイプS:32~3092°F;タイプB:212~3272°F;タイプL:-328~1562°F;タイプU:-328~932°F
  • 電圧入力範囲 0から5V、0から10Vまで
  • 重量 4 oz

Supported Applications

The Dwyer Series 32A is a compact, microprocessor-based temperature and process controller designed for panel mounting in industrial automation environments. As the world's first dual display 1/32 DIN temperature/process controller, it supports universal input selection including thermocouple, RTD, DC voltage, or DC current signals.

Key functional capabilities documented for this series include:

  • Dual Display Operation: Simultaneous display of Process Value (PV) and Setpoint (SV).
  • Advanced Control Logic: Self-tune, fuzzy logic control algorithms.
  • Ramp/Soak Profiles: 16-segment ramp/soak function for precise thermal cycling.
  • Status Indication: Peak and valley indication with percent output display.

Operating Conditions & Performance

The Series 32A operates within an ambient temperature range of 14 to 131°F (-10 to 55°C). The unit features a front panel rating of NEMA 4X (IP66), providing protection against dust and water ingress. Power consumption is rated at 5 VA maximum.

Performance specifications for the series include:

  • Accuracy: ±0.25% of span, ±1 least significant digit.
  • Display Resolution: Two 4-digit, 7-segment LEDs with a height of 0.259 in (6.35 mm).
  • Memory Backup: Nonvolatile memory requiring no batteries.

The controller incorporates loop break protection and four password-protected security levels to safeguard configuration parameters.

Control Output Ratings

  • Relay (SPST): 3A @ 240 VAC resistive; 1.5A @ 240 VAC inductive. Pilot duty rating: 250 VA, 2A @ 120 VAC or 1A @ 240 VAC.
  • Switched Voltage (Non-isolated): 5 VDC @ 20 mA.
  • Proportional Current: 0 to 20 mADC, scaleable into a maximum of 600 Ohms load resistance.

Power Supply Options

  • Standard Input: 100 to 240 VAC nominal (+10% -15%), 50 to 400 Hz single phase; or 132 to 240 VDC nominal (+10% -20%).
  • Option 9502: Low voltage input of 12-24 VDC/VAC, 50-400Hz.

Physical Dimensions & Installation

The unit weighs 4 oz (114 g). The required panel cut-out is 1.772 x 0.874 in [45 x 22 mm], with a maximum supported panel thickness of 0.25 in [6.35 mm].

Configuration Options

The Series 32A is available in multiple configurations defined by alarm programming and output combinations. The model number structure follows the format: `32A<MODEL>` (e.g., 32A020, 32A123, 32A153). Available variants include:

  • No Alarm / Single Output: Models such as 32A020 (5 VDC), 32A050 (Current), and 32A030 (Relay).
  • Alarm / Dual Output: Models such as 32A123 (5 VDC + Relay) and 32A133 (Dual Relay).
  • Alarm / Current & Relay: Model 32A153.

The series supports optional RS-485 serial communication (-992) for remote reading and writing of control parameters. Accessories include the MN-1 Mini-Node™ USB/RS-485 converter, LoveLinks III configuration software, and A-600 R/C snubber.

Snubber Protection (Relay Outputs)

To protect relay output devices from electrical noise generated by contactors or solenoids, the series documentation recommends using a snubber. The general purpose snubber part number is 541-0014. Alternatively, a custom assembly may be constructed using a 0.5 µF capacitor (600V) in series with a 100 Ω resistor (1/4 W), connected as close to the coil terminals as possible.

Key Product Differences

Variants within the Series 32A differ primarily by their alarm capability and output signal configuration. The standard model selection table defines six distinct configurations:

  • Model 32A020: No Alarm, Output A = 5 VDC, Output B = None.
  • Model 32A123: Yes (Alarm), Output A = 5 VDC, Output B = Relay.
  • Model 32A133: Yes (Alarm), Output A = Relay, Output B = Relay.
  • Model 32A153: Yes (Alarm), Output A = Current, Output B = Relay.
  • Model 32A050: No Alarm, Output A = Current, Output B = None.
  • Model 32A030: No Alarm, Output A = Relay, Output B = None.

The series also offers an optional low-voltage power supply (-9502) and RS-485 communication (-992). Note that only Option 9502 may be combined with another option; no other options are combinable.

アクセサリー

accessories

R/C snubber (recommended for inductive loads like a solenoid or contactor)
43,173원 / 개당
0 在庫あり

sensors

J type, 100’ on spool, FEP insulation, 200°C, black outer sheath, 24 AWG, 0.20 SQMM
70,344원 / 개당
0 在庫あり
K type, 100' on spool, FEP insulation, 200°C, yellow outer sheath, 24 AWG, 0.20 SQMM
¥16,932 / 各
0 在庫あり

signal conditioners

¥23,065 / 各
0 在庫あり
32A032A1-12358-02138-992-9502
アラーム
出力A
出力B
オプション
"
ja-JP
ja_JP
設定を保存する