D'experts à experts

Rope and Tape Heaters Rope and tape heaters are flexible heaters designed to wrap around pipes, beakers, and other round surfaces. Rope and tape heaters are very similar in that they have similar power densities and construction.

Marqué comme:Apprentissage Technique, Soyez Curieux

Conditionneurs de Signal Un conditionneur de signal est un dispositif qui convertit un certain type de signal électronique en autre type de signal.

Marqué comme:Info sur Produit, Soyez Curieux

Installation Obstacles: Invasive In-Pipe Immersion Sensors When it comes to process piping systems, temperature of in-pipe media is often a necessary measurement – and one that needs to be monitored accurately. Traditionally, in-pipe immersion sensors are used. However, invasive in-pipe immersion sensors are often not ideal for use within process piping systems. Here are 3 considerations to take before installing immersion sensors in process piping systems.

Marqué comme:Apprentissage Technique, Soyez Curieux

A Need for Speed: How HANI Technology Was Used to Expedite the Commission of a Productivity Enhancing Investment The brewing team at Allagash Brewing Company successfully utilized the versatility, non-invasiveness, and high accuracy of the HANI Clamp Temperature Sensor – which clamps right onto the outside of a desired pipe and measures the fluid inside with as much accuracy and with the same high performance as traditional sensors – to expedite the commissioning process and meet their ROI of an important investment to their system.

Marqué comme:Blog, Soyez Curieux

The Future is Bright: Omega’s Own Co-Op Wins Prestigious Award The Omega Co-Op/Internship Program was created to help students grow and realize their full potential - setting them up with the experiences and tools needed to excel in their future careers. We sit down with one of our latest engineer co-ops, David Austin, to find out more about his time with Omega and his recent award from Drexel University.

Marqué comme:Blog, Soyez Curieux

Balls Out Have you ever heard someone use the term ‘balls out’? You know, as in giving it maximum effort or going all out. Have you ever wondered where the term comes from? Well, the truth is it probably doesn’t mean what you think it does. For the origins of the term, we need to go back to the late eighteenth century, when Scottish inventor and mechanical engineer James Watt was looking for a way to automatically regulate the speed of a steam engine.

Marqué comme:Blog, Soyez Curieux

HANI Application: Temperature Monitoring for CIP Processes in Beer Brewing Systems

Marqué comme:Apprentissage Technique, Soyez Curieux

HANI Clamp Things to Know - Thermal Conductivity

Marqué comme:Info sur Produit, Allez de l’Avant

HANI Clamp Things to Know - Pipe Types, Sizes, and Metals

Marqué comme:Info sur Produit, Allez de l’Avant

Why Calibration Certificates Matter Calibration certificates validate the device’s accuracy levels to a standardized reference.

Marqué comme:Apprentissage Technique, Soyez Curieux

How to Use a Magnetic Flow Meter to Meet Hygiene Requirements for Clean-in-Place (CIP) Systems In the food and beverage industry, clean-in-place (CIP) maintenance is essential for meeting safety and hygiene standards while maintaining process efficiency and maximizing equipment service life.

Marqué comme:Apprentissage Technique, Soyez Curieux

Making Maintenance a Breeze Selecting the proper cable family according to the process conditions is necessary to get desired temperature controls within the pipes.

Marqué comme:Apprentissage Technique, Soyez Curieux

What is a Heat Trace System? A heat trace system is a set of paths lined along pipes or vessels.

Marqué comme:Apprentissage Technique, Soyez Curieux

Designing the Right Heat Trace System Designing a perfect heat trace system requires considering several important variables.

Marqué comme:Apprentissage Technique, Soyez Curieux

Choosing a Signal Transmitter From reviewing both devices and the way they work with other devices, it is clear that signal transmitters and signal conditioners more or less perform the same set of tasks.

Marqué comme:Apprentissage Technique, Soyez Curieux

Signal Transmitters A signal transmitter is a device that transmits data from one place to another.

Marqué comme:Apprentissage Technique, Soyez Curieux

Why IoT Isn’t Good Enough for Industrial Applications Whenever there's a discussion about IIoT, a comparison with IoT always exists.

Marqué comme:Apprentissage Technique, Soyez Curieux

What components are in a IIoT network? IIoT or Industrial Internet of Things is one such technology that is well-known among industry experts but mostly unknown to the rest.

Marqué comme:Apprentissage Technique, Soyez Curieux

Benchtop Controller for Mantle Heater Heating mantles are commonly used in laboratories to heat liquids as part of the research process.

Marqué comme:Application, Soyez Curieux

How to Maintain the Perfect Temperature in a Pizza Oven If you want your pizzas to come out cooked to perfection every time, you need to make sure that your oven temperature consistently maintains the right temperature.

Marqué comme:Application, Soyez Inspiré

Let's Learn About It with Omega: The Water Hammer Effect Water hammer effect is an impact load that is the most misunderstood force known to pressure transducers today. A water hammer is created by stopping and/or starting a liquid flow suddenly.

Marqué comme:Apprentissage Technique, Soyez Curieux

4-20mA Input It is extremely simple and inexpensive to measure 4-20ma signal with a device that will measure only Voltage inputs.

Marqué comme:Apprentissage Technique, Soyez Curieux

Everything you need to know about Immersion Heaters An immersion heater is a device which is installed in a tank or container to heat a liquid. The installation can be over-the-side, flanged, or threaded.

Marqué comme:Apprentissage Technique, Soyez Curieux

What is a Polyimide Heater? Polyimide heaters, also known as Kapton heaters, are made from Kapton, a polyimide film developed by DuPont.

Marqué comme:Apprentissage Technique, Soyez Curieux

What are silicone heaters used for? Silicone rubber heaters have a wide range of industrial, commercial, and military applications. These heaters are resistant to radiation, moisture, compression set, weathering, vacuum, fungus, oils, solvents, and chemical attack.

Marqué comme:Apprentissage Technique, Soyez Curieux

What is a PID Controller? A PID controller is an instrument used in industrial control applications to regulate temperature, flow, pressure, speed and other process variables.

Marqué comme:Info sur Produit, Soyez Curieux

Water and Wastewater Test Methods for Operators A variety of test procedures and methods are available for use by water and wastewater operators.

Marqué comme:Apprentissage Technique, Soyez Curieux

What is a Voltage Divider? In order to measure a signal which varies over a range greater than the input range of an analog or digital input of a measuring device, a voltage divider can drop the voltage of the input signal to the level the analog or digital input can measure.

Marqué comme:Apprentissage Technique, Soyez Curieux

Common Problems with Data Acquisition Devices Traditional printer drivers are very benign; they are only active, and use the printer port when you tell an application to print.

Marqué comme:Apprentissage Technique, Soyez Curieux

Temperature Control Using PID Almost every process control application would benefit from PID control.

Marqué comme:Info sur Produit, Soyez Curieux

Technical Principles of Valves Solenoid valves are used wherever fluid flow has to be controlled automatically. They are being used to an increasing degree in the most varied types of plants and equipment.

Marqué comme:Apprentissage Technique, Soyez Curieux

Low Noise Thermocouple System A low noise thermocouple system consists of a probe, a connector and wire. Each component has distinct noise and they provide a way to reduce electrical noise

Marqué comme:Apprentissage Technique, Allez de l’Avant

Specialty Level Switches Thermal, vibrating, and optical level switches are specialty devices developed to solve specific level detection problems.

Marqué comme:Apprentissage Technique, Soyez Curieux

Industry 4.0 — The Next Industrial Revolution Imagine a manufacturing facility where everything goes as planned.

Marqué comme:Apprentissage Technique, Soyez Inspiré

Improving Safety in Machine Control Systems with Limit Switches Imagine a product being moved on a conveyor belt that somehow gets out of place.

Marqué comme:Apprentissage Technique, Allez de l’Avant

Les solutions sans fil renforcent la sécurité des produits dans les industries alimentaires et des cosmétiques La pureté des ingrédients est importante pour tous les procédés de production, mais elle est particulièrement importante pour les produits alimentaires et les produits cosmétiques.

Marqué comme:Étude de Cas, Soyez Curieux

Types of Relays Relays are the control switches that operate with low-powered electrical signals controlling most types of circuits.

Marqué comme:Apprentissage Technique, Soyez Curieux

Creating a Machine Guarding Policy A machine guarding policy is a critical part of the safety program at any firm where employees interact with machinery.

Marqué comme:Apprentissage Technique, Allez de l’Avant

Préhenseurs Les dispositifs de mouvement imitent les mouvements des personnes, et dans le cas du préhenseur, les mouvements des doigts.

Marqué comme:Info sur Produit, Soyez Curieux

Bandes Chauffantes Une bande chauffante est un dispositif qui est monté sur une surface et utilisé pour chauffer la surface ou l’air (des gaz).

Marqué comme:Info sur Produit, Soyez Curieux

Understanding Deadband for Pressure Switches A pressure switch consists of a sensing component and an electrical switch.

Marqué comme:Apprentissage Technique, Soyez Curieux

Cartouches chauffantes La majorité des applications ne requièrent pas le maximum en termes de watt/cm². N'utilisez qu'une densité de puissance aussi élevée que nécessaire.

Marqué comme:Info sur Produit, Soyez Curieux

Réglage d'un régulateur PID Heat treatment processes exemplify the need for PID control. To ensure consistent product quality the temperature inside an oven or furnace must be kept within narrow limits

Marqué comme:Apprentissage Technique, Allez de l’Avant

Contrôleurs de température Comme son nom l'indique, un contrôleur de température est un instrument pour contrôler la température.

Marqué comme:Info sur Produit, Soyez Curieux

Introduction aux moteurs pas à pas Un moteur pas à pas est un moteur électrique synchrone sans frotteurs qui convertit les impulsions numériques en rotation de l’arbre mécanique.

Marqué comme:Info sur Produit, Soyez Curieux

Présentation des réchauffeurs flexibles Un réchauffeur flexible est un dispositif capable de s’adapter à la surface à chauffer.

Marqué comme:Info sur Produit, Soyez Curieux

Éléments chauffants Les éléments chauffants électriques sont utilisés dans divers procédés où la température d’un objet ou procédé doit être augmentée.

Marqué comme:Info sur Produit, Soyez Curieux

Thermoplongeurs Un thermoplongeur est un dispositif qui est installé dans un réservoir ou un conteneur pour chauffer un liquide. Il peut être amovible, à bride ou à visser.

Marqué comme:Info sur Produit, Soyez Curieux

Manomètres et Interrupteurs de Pression Les manomètres et les interrupteurs de pression sont parmi les instruments les plus souvent utilisés dans les usines. Mais en raison de leur grand nombre, l’attention portée à l’entretien (et la fiabilité) peut être compromise.

Marqué comme:Info sur Produit, Soyez Curieux