1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
FDT-25-Flow-Meter
Kit de débitmètre ultrasonique numérique portable
Modèles en stock
- Clamp-on ultrasonic meter installs without cutting pipe - ideal for retrofit on liquids
- High accuracy ±1% with straight-through flow path for DN15-DN6000 (¾″–240″) pipes
- Outputs both 4-20 mA and RS-485 with built-in totalizers (positive, negative, net)
- Non-invasive measurement, low maintenance, works on most pipe materials (metal/plastic)
FDT-25-Flow-Meter
À partir de
C$
2,930.81
Modèles en stock
Aperçu du produit
- Précision ± 1 %
- Précision ±1 % de la lecture à des débits > (0,2 m/s) 0,6 ft/s
- Taille et type de batterie NiMh AAA
- Longueur du câble 5 m
- Interface de données RS232
- Langue d'affichage Anglais, Chinois
- Remarque sur l'affichage 4 x 16 lettres anglaises, 4 x 8 caractères chinois
- Type d'affichage Écran LCD
- Caractéristiques nominales du boîtier IP65
- Matériaux ABS
- Type de mesure Temps de transit
- Température de fonctionnement, max 60 °C
- Température de fonctionnement, min -20 °C
- Taille du tuyau, max 4 in
- Taille minimale du tuyau 0.75 in
- Température maximale du processus 90 °C
- Température minimale du processus 0 °C
- Humidité relative 85 % HR
- Répétabilité 0,002
- Temps de réponse 0 à 999 sec
- ID de série FDT-25-Flow-Meter
- Approvisionnement Remarque 3 piles NiMH intégrées "AAA" (incluses) avec chargeur 100 à 240 VCA, entièrement chargées durent plus de 10 heures
- Type d'approvisionnement électrique Batterie
- Type de transducteur À pince
- Vitesse maximale 32 m/s
- Vitesse, min -32 m/s
Le débitmètre à ultrasons portable FDT-25 est conçu pour fonctionner avec des transducteurs à pince afin de permettre de mesurer avec précision le débit d'un liquide dans un tuyau fermé sans avoir à insérer de pièces mécaniques à travers la paroi du tuyau ou à faire saillie dans le système d'écoulement. Utilisant des techniques de temps de transit ultrasonique, le FDT-25 est contrôlé par un système à microprocesseur qui contient une large gamme de données lui permettant d'être utilisé avec des tuyaux dont le diamètre extérieur varie de 15 mm à 6 000 mm (selon le modèle) et qui sont fabriqués dans presque tous les matériaux. L'instrument fonctionne également dans une large gamme de températures de fluide.
PDF & Manuels
Logiciels & Pilotes
Accessories
cables
consumables
sensors
Transducteur à pince haute température - Petit (0 à 160 °C) Taille de tuyau DN15~DN100 (3/4 po à 4 po)
C$664.62 / each
5 En stock
Afficher les évaluations et les avis
Rated 4 out of
5
by
Zayna from
Decent Portable Flow meter
The flow meter is decent. But the manual is sorely lacking. I had to look up youtube videos because it doesn't tell you anything about applying the gel, or the chain or anything. I don't understand how to use the chain. It should have come with straps to keep the magnets in place because they tend to slip on a vertical pipe. Other than that the flow meter seems to work ok, but I was not very sure how accurate the flow is.
Date published: 2021-05-07
Rated 3 out of
5
by
JoshMechEIT from
Poor Submenu for Compatible Transducers
Plenty of positives to the meter. The biggest downfall is that the compatible transducers are not listed in the transducer type submenu. There is no reason for this to be a confusing process but this submenu in particular is terrible.
Date published: 2021-03-31
Rated 5 out of
5
by
Anonymous from
GOOD PRODUCT AT A FAIR PRICE
A VERY USEFUL METER, EASY TO USE AND A COMPETITIVE PRICE
Date published: 2025-12-29
Rated 5 out of
5
by
Ricky JPG from
Easy to use
We purchased this to verify flow for hydronic and plumbing flushing in a government facility. The meter was easy to set up after reviewing the directions. We have been able to use it on multiple size pipe lines to verify we have the proper water velocity.
Date published: 2025-08-14
Rated 5 out of
5
by
Tiffannie Brown from
Thats why we purchase from Omega
Handles the job perfectly, that's why we purchased from Omega
Date published: 2023-10-20
Rated 3 out of
5
by
Pat Galvin from
Meters worked well, overall.
I ordered seven of these meters. One shipped with a completely dead battery that would not hold a charge. Very disappointing. Others worked well on bare galvanized and bare stainless steel pipe. Ask Omega tech support for a helpful install guide (you have to ask for it - not included in box).
Date published: 2023-02-20
If you do not perform a traceable calibration, who does?
Thank you for your inquiry. We do not have any specific lab recommendations. Any flow calibration lab local to you should be able to provide you the cal report for your process conditions.
Date published: 2020-07-10
1. what is the transducer chain used for? 2. Can data be exported to excel sheet and if so how? Is something additional required? Can system be used to record total GPM and peak GPM over the course of a week if you plug it in instead of using battery
Thank you for your inquiry, about the ultrasonic flow meter. It is used to secure the transducer in place, especially, for larger diameter pipes and the RS232 can be extracted into a an Excel file. We provide the document after the fact and only records flow rate and is not live streaming.
Date published: 2024-05-14
can this be used on Diesel Line to know what quantity we have received from Tanker?
Thank you for your inquiry about the portable flow meter. It can be used to measure diesel fuel and not meant for rubber, concrete, clay, or fiberglass construction of material of pipping. Any other construction of material of pipe such as stainless steel, carbon steel, or PVC is acceptable.
Date published: 2023-05-16
DO YOU HAVE A BRACKET TO HOLD BOTH TRANSDUCERS THAT HAVE A RULER ON IT
Thank you for your inquiry. Unfortunately, no we do not have a bracket like this.
Date published: 2019-12-13
Can this flow meter be used in an application where the pipe that we want to measure flow was submerged in water?
Thank you for your inquiry about the ultrasonic flow meter. Unfortunately, the transducers that wrap or strap around the pipe cannot be submersed in water in general. It will be deemed useless and not transmit any signal.
Date published: 2021-06-03
How do suspended solids in the flow affect the accuracy of this meter?
Thank you for your inquiry about the ultrasonic flow meter. If there is suspended particles greater than 100 microns and 100 ppm in concentration at all times, then, we highly recommend the Doppler style ultrasonic flow meter. If it is intermittently flowing thru the flow meter, it will not hurt the accuracy since it will average the flow when it updates.
Date published: 2023-10-25
While measuring velocities cleaning pipe, can turbulent flow skew velocity readings? While flushing at higher velocities beyond system design, we experience pipe vibration too.
Yes, turbulent flow can skew velocity readings, especially during pipe cleaning or flushing.
Date published: 2025-05-28
Which model will be able to measure compressed air flow?
Thank you for your inquiry. Unfortunately, Omega does not have non-contact ultrasonic flow meter for gases, only for liquids.
Date published: 2024-07-27