1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
SGD-10/120-LY11
6 mm Grid Length, 6.3 mm Grid Width 350 Ω Resistance
Choisir une variante
Connexion électrique
Ajouté à votre panier
Configuration complète.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer pour recommencer
Spécifications du produit
<< Voir tous les modèles de produit| Marque |
 |
| Connexion électrique | Fils conducteurs |
| ID de série | SGD-LINEAR1-AXIS |
| Largeur de grille | 4.9 mm |
| Largeur du support | 8 mm |
| Longueur de grille | 10 mm |
| Longueur du support | 17.7 mm |
| Nombre de bornes | 5 |
| Option de construction du matériau | Steel |
| Résistance nominale | 120 Ω |
| Style de grille | Linear |
| Taille de l'emballage | 10 |
| Température de fonctionnement, max | 200 °C |
| Température de fonctionnement, min | -75 °C |
| Tension d'entrée | 14 Vac |
| Tension maximale | 14 Vrms |
| Type de jauge | Linear pattern,Large size |
| Valeur brute du poids | 0.04 |
| Échelle de longueur de grille | 6 mm |
| Pays d'origine | United Kingdom |
| Voir toutes les spécifications | |
PDF & Manuels
Accessoires
Module de Complétion de Pont à Jauges de Déformation Compact
Depuis C$200.24
0 En stock
Résistances à jauge de contrainte pour complétion de pont
Depuis C$29.05
0 En stock
Adhésif pour jauge de contrainte à durcissement à froid
Depuis C$23.82
0 En stock
Afficher les évaluations et les avis
Rated 5 out of
5
by
Victory16 from
excellent
It is perfect for my project. It is happy to purchase this one.
Date published: 2016-10-28
Rated 5 out of
5
by
Anonymous from
Dynamic experimental setup (SHPB)
This Gage is easy to used with lab experimental setup.
Date published: 2020-05-31
Rated 4 out of
5
by
Walker678 from
Pretty straightforward strain guahe
Purchased to use for a power meter on a bicycle. They are working well now that I have them hooked up, but getting them on properly was a bit of work. I have only done this once before but last time I remember it being easier. I couldn't get the pads to wet with solder for a long time and had the pads rip off on a few by accidentally pulling on the cables (lightly) once they were hooked up. Probably my own fault, but I did barely touch them. I put on a new pair and smothered them in superglue, they are stellar now.
Date published: 2018-03-28
Rated 3 out of
5
by
Design Innovation from
They work, but with some installation issues
These strain gauges work reasonably well, but with lower mechanical gain than some other brands. Their solder pads are actually quite difficult to solder to, and multiple calls to their technical help line went unanswered.
Date published: 2018-07-30
Rated 4 out of
5
by
Marco B from
Timely Delivery, but Room for Improvement
The strain gauges arrived earlier than expected, which was impressive and greatly appreciated. The packaging was mostly secure, but one group was fastened with a rubber band that slightly compressed them. Thankfully, there was no damage, but more attention to this detail would ensure a flawless experience next time.
Date published: 2024-11-28
Rated 5 out of
5
by
Gary H from
Efficient delivery and high product quality
The product of strain gauges were delivered very efficiently such that we were able to eliminate any possible delay for our important testing. In the meantime, the quality of Omega strain gauges is the best of the peer products from other manufacturers.
Date published: 2023-04-03
Rated 5 out of
5
by
Asdfgh from
Rock crusher strain gauge testing
Worked perfectly on cast high strength steel of a rock crusher
Date published: 2023-02-09
Rated 5 out of
5
by
AmyS from
Omega is a Great Supplier.
Omega is a Great Supplier and very pleased with the quality of their products.
Date published: 2022-08-18