1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
HH501DK-Series
Compteur de thermocouple de type K à 4 canaux, traçable NIST
Modèles en stock
- 4 entrées avec mesure de température différentielle
- Affichage numérique 3 1/2 avec rétroéclairage
- Mesure des thermocouples de type K en °F ou °C
- Fonction de maintien de lecture (HOLD) et valeur MAX
HH501DK-Series
À partir de
C$
303.66
Modèles en stock
Aperçu du produit
- Fonctions supplémentaires 1 Fonctions Read HOLD, MAX
- Indicateur de batterie « + - » s'affiche lorsque la tension de la batterie descend en dessous du niveau de fonctionnement
- Diamètre 53 mm
- Type d'affichage Remarque Affichage à cristaux liquides (ACL) 3 1⁄2 chiffres avec lecture maximale de 1999 Sortie d'affichage par défaut : Zéro : Automatique
- Connexion électrique Connecteur miniature mâle Sub-D
- Hauteur 195 mm
- Échelle de mesure de la température, max 1300 °C
- Échelle de mesure de la température, min -50 °C
- Nombre de canaux 4
- Température de fonctionnement, max 50 °C
- Température de fonctionnement, min 0 °C
- Température de fonctionnement Remarque 0 à 50°C (32 à 122°F)@ <70 % HR
- Dépassement de plage (OL) ou (-OL) est affiché
- Polarité Automatique ; positif implicite ; indication de polarité négative
- Humidité relative, max 0,8
- Humidité relative, min 0%
- Fréquence d'échantillonnage 2,5 Hz (2,5 mises à jour/seconde)
- ID de série HH501DK-Series
- Température de stockage, max 60 °C
- Température de stockage, min -20 °C
- Remarque sur la température de stockage -20 à 60°C (-4 à 140°F), 0 à 80 % HR avec la pile retirée du compteur
- Tension d'alimentation 9 Vcc
- Précision de la température ± 0.3%
- Remarque sur la précision de la température ± (0,3 % lecture + 1°C) -50 à 1000°C ; ± (0,5 % lecture + 1°C) 1000 à 1300°C ; ± (0,3 % lecture + 2°F) -58 à 1999°F Précision indiquée : 23°C ± 5°C <75 % d’humidité relative (la spécification de précision n’inclut pas
- Résolution de température 0,1 °C
- Type de capteur de température Thermocouple
- Type de thermocouple K
- Poids 250 g
- Remarque sur le poids Environ 250 g (9 oz) batterie incluse
- Largeur 92 mm
L'OMEGA HH501DK est un thermomètre robuste et facile à utiliser, doté de 4 entrées miniatures standard. Il accepte les sondes thermocouples de type K et couvre des échelles de -50 à 1300 °C (-58 à 1999 °F). Il fournit également des mesures de température différentielle T1-T2, T1-T3, T1-T4, ainsi que des mesures individuelles des 4 entrées.
PDF & Manuels
Afficher les évaluations et les avis
Rated 5 out of
5
by
Jim Hightower from
Design problem
I used a shorting bar to check the four inputs to see if they were the same. They indicated the ambient temperature but, when the supplied thermocouples were plugged in, a different ambient temperature was indicated. I assume that this is due to the tolerance of the thermocouple wire. A bigger difficulty was the spacing of the TC receptacles. When all four TCs are plugged in, it is very difficult to remove one of the plugs. It was necessary for me to pry two of them out with a small screwdriver before the other two could be removed. This is a design problem that should never been approved for manufacture.
Date published: 2020-11-23
Does it come with a immersion thermocouple probe?
The probes that come with the HH501DK are not recommended for immersion and a metal sheathed probe would need to be purchased separately.
Date published: 2020-09-03
We just bought 2 of Omega HH501 Dk thermometers. When temping products it keeps going into OL while we are temping the product. Why does this happen?
The OL would be an open input so one of the Thermocouples is opening up intermittently or at specific temperatures. Make sure the probes are operating within their specified range and try others to filter out possible defective ones.
Date published: 2024-10-04
Does it have data output such as RS-232 or USB?
This unit does not provide a communications output.
Specifications are below:
Temperature Range: -50 to 1300°C (-58 to 1999°F)
Input: Type K thermocouple
Accuracy:
±(0.3% rdg + 1°C) -50 to 1000°C
±(0.5% rdg + 1°C) 1000 to 1300°C
±(0.3% rdg + 2°F) -58 to 1999°F
Display: 3 1/2 digit liquid crystal display (LCD) with maximum reading of 1999
Polarity: Automatic, positive implied, negative polarity indication.
Overrange: (OL) or (-OL) is displayed
Zero: Automatic
Low Battery Indication: visual indicator is displayed when battery voltage drops below operating level.
Measurement Rate: 2.5 times/sec
Operating Environment: 0 to 50°C @ <70% RH
Storage Temperature: -20 to 60°C, 0 to 80% RH with battery removed from meter
Accuracy: Stated accuracy @ 23°C ±5°C <75% relative humidity. (accuracy specification does not include type K thermocouple probe accuracy)
Dimensions: 195 x 92 x 53 mm (7.7 x 3.6 x 2.1")
Weight: Approx. 250 g (9 oz) including battery
Thank you for your question.
Date published: 2019-07-03
What is the length of the provided k thermocouples?
Thank you for your inquiry. The Type K Thermocouple 36" Long.
Date published: 2020-07-25
Does it come with type K thermocouples? Or, I have to buy thermocouples additionally. Is calibration needed before use, or it is already calibrated and tested before shipping? Thanks.
Hi, thanks for connecting with Omega. This unit comes complete with a NIST calibration certificate with no points, user’s manual, 4 beaded K Thermocouples, alkaline battery and a rubber boot. Please contact our Tech Support if you have any further questions. Thank you.
Date published: 2019-05-31