The LCGB series have 3 through holes around the perimeter for easy mounting, ± 0.25% linearity and 2mv/V output in capacities from 50 lbf to 50,000 lbf.

The CC1 family of stainless steel, ATEX certified, load cells are primarily designed for use as polished rod (pump off control) sensors in oil and gas pumping applications.

The LCCE series has an extra level of overload protection, up to 500% of FS. They have ± 0.03% linearity and a 3 mv/V output in capacities from 25 to 750 lbf.

D8000 Series can measure process inputs, thermocouples, and contact closures and generate current or voltage signals. USB interface communicates via MODBUS RTU.

D6000 Series interfaces have analog input, analog output, digital output, digital input, and communications modules. RS-485 MODBUS RTU Interface Protocol.

The LC8200 series are ideal for measuring clamping forces and bolt loading forces. They have ± 0.5% linearity and a 2 mv/V output in capacities from 5 to 10,000 lbf.

The LC8400 series have an extra large ID, ideal for measuring loading forces on large bolts or other suspended loads. Available in capacities from 1,000 to 200,000 lbf.

The LC8250 series are ideal for measuring clamping forces and bolt loading forces. They have ± 0.5% linearity and a 2 mv/V output in capacities from 1,000 to 100,000 lbf.

The LC8300 series are ideal for measuring clamping forces and bolt loading forces. They have ± 0.5% linearity and a 2 mv/V output in capacities from 1,000 to 100,000 lbf.

The LC8100 series are ideal for measuring clamping forces and bolt loading forces. They have ± 1.0% linearity and a 2 mv/V output in capacities from 100 to 750,000 lbf.

The LC8150 series are ideal for measuring clamping forces and bolt loading forces. They have ± 0.5% linearity and a 2 mv/V output in capacities from 5 to 500 lbf.

The LC321 series are low profile with a 1/4-28 UNF center, ± 2.0% linearity, and 2mv/V output in capacities from 250 lbf to 2,000 lbf. They are ideal for robotic applications.

The LC402 series are ideal for industrial weighing applications. They have ± 0.1% linearity and a 3mv/V output in capacities from 100 lbf to 750,000 lbf.

The LC901 series are ideal for measuring clamping forces of a bolt. They have ± 3.5% linearity and a 2 mv/V output in capacities from 2,000 to 100,000 lbf.

The LCWD high accuracy series are ideal for measuring clamping forces of a bolt. They have ± 0.75% or better linearity and a 2 mv/V output in capacities from 200 to 200,000 lbf

The LCMWD metric series are ideal for measuring clamping forces of a bolt. They have ± 0.75% or better linearity and a 2 mv/V output in capacities from 1,000 to 100,000 N.