Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
TXDIN400-Series-Tx
DIN Rail Transmitter with RFID Communications
- Isolated & Linearized
- High Accuracy with 16-Bit Conversion
- TXDIN401 Temperature Transmitter Accepts Pt100 or Ni100 RTD Inputs and Types J/K/T/E/R/S/B/N Thermocouples
- TXDIN402 Accepts Process Voltage, Current or Resistance Input
TXDIN400-Series-Tx
From
C$
182.28
Product Overview
- Approvals CE, RoHS
- CMRR 50 to 60 Hz
- Electrical Connection Screw Terminal
- Electrical Output FS + 5°C
- Enclosure Ratings IP20, NEMA
- Height 90 mm
- Length 64 mm
- Materials Polycarbonate, Silicone
- Memory 2624 Word
- Memory Note Non-Volatile Memory (Circular Buffer) for Data Logging
- Mounting DIN Rail Mount
- Operating Temperature, Max 85 °C
- Operating Temperature, Min -40 °C
- Output Value Process
- Relative Humidity 30 to 90% RH (non condensing)
- Resolution Output Resolution: 2 μA
- Sampling Rate 300 milliseconds between updates
- Software Windows® XP/7/8 (32-bit and 64-bit), Windows 10 (64-bit)
- Standard Limits of Error 0.1% FS or 0.2 °C whichever is greater
- Storage Temperature, Max 85 °C
- Storage Temperature, Min -40 °C
- Supply Power Type Loop Powered
- Weight 30 g
- Width 18 mm
The TXDIN401 and TXDIN402 DIN rail mount transmitters transform a temperature or process signal into a linearized 2-wire loop-powered 4 to 20 mA output. Model TXDIN401 is a temperature transmitter that accepts Pt100 or Ni100 RTD and Types J/K/T/E/R/S/B/N thermocouples. Model TXDIN402 is a process input transmitter that accepts voltage, current or resistance input. The characteristics of these converters ensure high precision on the reading scale with 16-bit conversion. The 4 to 20 mA output can be scaled based on the desired input range.
The programming procedure uses an RFID (NFC) mode with the dedicated TX400-RFID programmer that allows the user to make all calibrations and settings quickly and without the need to power and connect up the transmitter. Simply connect the TX400-RFID programmer to the USB port of your PC, start the RF Programmer configuration software and place the transmitter on top of the TX400-RFID programmer to establish communications. These transmitters are also provided with a data logging function for the input signal. Transmitters have a non-volatile memory (circular buffer) for data-logging with user-selectable sampling time. The user selects the sampling time (1 to 3600 seconds) and then each time the 4 to 20 mA loop powers the device, the input value is stored to non-volatile memory.
An additional programming tool is the Omega Brand Google App - "Direct Link" relying on RFID/NFC connectivity and allowing straightforward programming without wirings by Android devices.
Using the TX400-RFID programmer along with the RF Programmer configuration software (software is a free download from OMEGA) the user can:
• Completely configure the transmitter including scaling the 4 to 20 mA output to desired input range
• Implement field calibration to compensate for gain and offset errors
• Download logged data to PC for visualization and printing
The programming procedure uses an RFID (NFC) mode with the dedicated TX400-RFID programmer that allows the user to make all calibrations and settings quickly and without the need to power and connect up the transmitter. Simply connect the TX400-RFID programmer to the USB port of your PC, start the RF Programmer configuration software and place the transmitter on top of the TX400-RFID programmer to establish communications. These transmitters are also provided with a data logging function for the input signal. Transmitters have a non-volatile memory (circular buffer) for data-logging with user-selectable sampling time. The user selects the sampling time (1 to 3600 seconds) and then each time the 4 to 20 mA loop powers the device, the input value is stored to non-volatile memory.
An additional programming tool is the Omega Brand Google App - "Direct Link" relying on RFID/NFC connectivity and allowing straightforward programming without wirings by Android devices.
Using the TX400-RFID programmer along with the RF Programmer configuration software (software is a free download from OMEGA) the user can:
• Completely configure the transmitter including scaling the 4 to 20 mA output to desired input range
• Implement field calibration to compensate for gain and offset errors
• Download logged data to PC for visualization and printing
PDFs & Manuals
Software & Drivers
