France 0805 541 038 | Intl +31 01 57 32 48 17 | Bienvenue sur notre nouveau site web! Vous avez rencontré un problème ou un bug ? Veuillez le signaler ici.
HHF-SD1-Meter
실시간 데이터 로거가 포함된 열선 풍속계
Modèles en stock
- 슬림 프로브, 그릴 및 디퓨저에 이상적
- 타입 K 또는 J 열전대 입력
- 실시간 SD 메모리 카드 데이터 로거
- 녹색 백라이트 LCD
HHF-SD1-Meter
À partir de
1,169,305
원
Modèles en stock
Aper çu du produit
- 정확도 ± 5%
- 정확도 세부 사항 ± (5% + a) 판독값 또는 ± (1% + a) 전체 범위 중 더 큰 값
- 공기 속도, 최소 40 m/h
- 배터리 크기 및 종류 알칼리성 AAA
- 데이터 인터페이스 RS232, USB
- 표시 단위 °C, °F, ft/min, K/h, knot, mile/hr, m/s
- 디스플레이 유형 Vac라이트 LCD
- 폼팩터 휴대용
- 높이 8 in
- 길이 3 in
- 작동 습도 0 ~ 85% RH
- 작동 온도, 최대 50 °C
- 최소 작동 온도 0 °C
- 전력 소비 최대 48 mA
- 프로브 직경 0.47 in
- 프로브 길이 37 in
- 공정 온도, 최대 50 °C
- 최소 공정 온도 0 °C
- 해상도 0.1°C (0.1°F)
- 샘플링 시간 1초 ~ 3600초
- 샘플링 시간 사양 참고 샘플링 시간: 자동: 1초에서 3600초 수동: 데이터 로거 버튼을 한 번 누르면 데이터를 한 번 저장합니다
- 시리즈 ID HHF-SD1-Meter
- 공급 전력 참고 알칼라인 배터리 또는 하드 듀티 배터리
- 온도 정확도 ± 0.5 %
- 온도 센서 유형 열전쌍 타입 K 또는 서미스터
- 온도 센서 유형 사양 참고 유리 구슬 서미스터
- 무게 515 g
- 폭 1.5 in
Supported Applications
The HHF-SD1 is a combination hot-wire and thermistor anemometer with a built-in real-time SD card data logger, measuring air velocity and air temperature simultaneously from a single telescoping probe. A hot wire senses air speed while a glass-bead thermistor reads air temperature, and an input socket accepts a Type K or J thermocouple for surface or immersion temperature measurement.
Because it logs directly to an SD memory card and produces Excel-compatible (.xls) files, the HHF-SD1 is well suited to environmental testing, balancing fans and motors, HVAC and duct airflow surveys, and clean-room or laboratory air-movement studies. A backlit LCD, automatic temperature compensation, and selectable velocity units make it easy to read in the field, and an optional RS232/USB interface with software allows data to be pulled onto a PC.
The meter comes complete with a hard carrying case, a Type K thermocouple, the telescoping probe, an SD card, and an operator's manual. It is not designed for and should not be used in human applications.
Operating Conditions & Performance
Air velocity is measured over dual sub-ranges of 0.2 to 5 m/s and 5.1 to 20 m/s (equivalent to 40 to 3940 ft/min), with velocity accuracy of ±(5% + a) reading or ±(1% + a) full scale, whichever is greater. Air temperature is measured from 0 to 50°C (32 to 122°F) at 0.1°C (0.1°F) resolution. The telescoping probe is 12 mm (0.47") in diameter and extends from 280 to 940 mm (11 to 37").
Data-logging and interface behavior includes:
- Sampling time (Auto): 1 to 3600 seconds, with the display updating at 1 second
- Memory: SD memory card, storing Excel-compatible logs
- Interface: RS232/USB (with optional cable and software)
- Display: 52 x 38 mm (2.05 x 1.5") LCD with switchable green backlight
The unit runs on 6 'AAA' alkaline or heavy-duty batteries (included) or an optional 9V power adaptor, drawing 15 mA DC without the SD card or backlight and 36 mA with all functions active. It operates from 0 to 50°C (32 to 122°F) at less than 85% RH, weighs 515 g (1.13 lb), and measures 203 L x 76 W x 38 mm D (8 x 3 x 1.50"). The instrument is manufactured to ISO 9001 quality standards.
Configuration Options
Offered as a single model, the HHF-SD1's flexibility comes from its selectable measurement scales and its thermocouple input. Velocity can be displayed in m/s, km/h, ft/min, knots, or mile/hr, and each scale uses a fine/coarse dual-range resolution — for example 0.01 m/s at low speed and 0.1 m/s at higher speed. Temperature reads in °C or °F with automatic temperature compensation.
When a thermocouple is fitted (sold separately), the measuring capability depends on the sensor type. A Type K sensor covers -50 to 1300°C (-58 to 2372°F), while a Type J sensor covers -50 to 1200°C (-58 to 2192°F); both deliver 0.1°C resolution and ±(0.4% + 0.5°C) accuracy over their primary spans, easing to ±(0.4% + 1°C) at the coldest sub-range.
Key Product Differences
The series consists of one meter supported by a full set of replacement and interface accessories:
- HHF-SD1 — Data-logging airflow meter with SD card, hot-wire type
- HHF-SD1-RP — Replacement hot wire probe
- SW-U101-WIN — Software for data logging from meters, with USB and RS232 cables
- HC-SD — Replacement hard carrying case
- SC-SD — Soft carrying case
- ADAPTER-SD — AC adaptor
- USB-SD — Spare USB cable (SW-U101-WIN software required)
- RS232-SD — Spare RS232 cable (SW-U101-WIN software required)
- 2GB-SD — Spare 2 GB SD memory card
Type K and Type J thermocouples are ordered separately to match the temperature task.
PDF & Manuels