Australia +61-2-4272 2055 | Welcome to our new website, found an issue or bug? Please report it here
Series-200-300
Durablock® Solid Plastic Low-Range Gas & Air Pressure Gauges, NIST Options
Durablock® 고체 플라스틱 저압 가스 및 공기 압력 게이지, NIST 옵션- 1인치 두께의 아크릴 플라스틱 본체는 단단한 블록으로, 사실상 파손되지 않으며 안정적이고 변형 위험이 없습니다.
- ±0.0002인치 정확도의 드릴링된 구멍은 휨이나 굽힘이 없으며, 변형으로 인한 재교정이 필요하지 않습니다.
- 높은 습윤성을 가진 선택된 게이지 유체는 가장 정확한 판독을 위해 일관되고 잘 형성된 머니스크스를 만듭니다.
- 엄지 나사 잠금식 조절 가능한 반사 광택 알루미늄 눈금으로 손쉬운 영점 조정이 가능합니다.
- 편차 없는 판독은 머니스크스와 눈금에 반사된 그 이미지 정렬만으로 최대 정확도와 일관성을 달성합니다.
- 과압 안전 트랩은 범위 초과 압력이나 압력 급증으로 인한 유체 손실을 방지합니다. (No. 215에는 필요하지 않습니다.)
- 경사형 게이지의 수평 조정은 게이지 측면 또는 하단의 잠금 엄지 나사를 풀고, 내장된 민감한 연마 유리 기포 수평계를 기준으로 조정한 후 다시 조입니다.
- 두꺼운 게이지 강철 장착 패널은 회색 해머로이드 마감 처리되어 있습니다.
- 정밀 제작으로 장치가 최고 기준을 충족함을 보장합니다.
- 표준 장치는 A-315 3/16인치 내경 튜빙 커넥터를 갖추고 있으며, 제품 구성기에서 더 많은 연결 옵션을 제공합니다.
Series-200-300
From
1,452,863
원
Product Overview
- 응용 분야 산업 및 제조업, 실험실 및 과학
- 보정 옵션 해당 없음
- 충전 유체 적색 게이지 유체
- 측정 유형 압력
- 작동 온도, 최대 150 °F
- 증명압 최대 100 psi
- 시리즈 ID Series-200-300
- 무게 3 lb
Supported Applications
The Dwyer Series 200 & 300 Durablock® Solid Plastic Stationary Gages are designed for measuring low range gas and air pressures, including positive, negative, or differential readings. These inclined and vertical (well-type) manometers serve laboratory applications requiring high accuracy as well as general industrial service.
Documented measurement functions include:
- Air velocity
- Static pressure
- Furnace draft
- Air filter pressure drop
Operating Conditions & Performance
The series is constructed from solid plastic and utilizes Dwyer® gage fluid for operation. Cleaning should be performed with mild soap and water only, as other fluids or solvents may damage the instrument.
Ambient temperature limits are critical to device integrity: temperatures over 135°F will damage the gage. For laboratory applications requiring an accuracy of ±2%, extreme care is required during installation and testing. Specific precautions for this level of accuracy include using duct diameters ≥ 4", accurate traverse sketches, smooth straight duct sections, and egg crate type straighteners.
Field tests are expected to be accurate within plus or minus 5%. Air velocity indications provided by the instrument assume dry air at 70°F (21.3°C), 29.9" Barometric Pressure, and a resulting density of 0.075/cu. ft. Corrections for variations should be calculated using the provided formulas.
When checking inlet and discharge fan and blower pressures, air velocities above 700 ft. per min. (12.81 km/s) can cause an appreciable error.
Configuration Options
The Series 200 & 300 offers a range of inclined and vertical configurations with specific measurement ranges expressed in inches water column, millimeters water column, or centimeters water column. Available models include the 200 series (inclined) and 300 series (vertical), along with metric variants.
Process connections are configurable via option codes:
- -B: B type connections featuring two molded nylon rapid shutoff tubing connectors, one 9 foot length of rubber tubing, and one brass terminal tube.
- -C: C type connections with two 1/8" pipe thread openings.
- -D: D type connections consisting of two compression fittings for 1/4" O.D. copper or aluminum tubing.
- -E: E type connections equipped with two 3-way vent valves, converting from 1/8" NPT to 1/4" metal tubing.
Additional options include -NIST for NIST calibration. Accessories available for the series include model A-101 (1 oz dispenser bottle of red gage fluid, .826 sp. gr.), model A-315 (Gage connector, shutoff type, for 3/16" rubber tubing), and model A339 (Adapter, brass, 1/8" NPT to 3/16" rubber and 1/8" ID plastic tubing).
Key Product Differences
The series distinguishes between inclined manometers (Models 200.5 through 246) and vertical well-type manometers (Models 300, 306, 308, 310). Metric versions are designated with an "M" prefix in the ordering guide.
Physical dimensions vary by model:
- Inclined Models: Dimensions range from Model 201 at 8-1/4 in (20.96 cm) square to Model 246 at 22 in (55.88 cm) square.
- Vertical Models: Dimensions vary by model, such as Model 300 measuring 3-11/16 in x 8-1/4 in and Model 310 measuring 5-5/16 in x 15-1/4 in.
Accessories
accessories
Clear flexible vinyl tubing, 3/16" ID x 5/16" OD, lengths to 500'; 45 psi maximum pressure @ 73°F.
AUD0.94 / foot
0 In Stock
Adapter, brass, 1/8" NPT to 3/16" rubber and 1/8" ID plastic tubing.
AUD20.98 / each
0 In Stock