검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

CNPT-Series

1/32, 1/16, and 1/8 DIN Universal High Performance Controllers

재고가 있는 모델
  • Strain &  Bridge Inputs, 6 Digit Display and Upgraded Platinum Software Now Available
  • Industry Leading Performance (20 Samples / Sec), High Accuracy
  • Up to 6 Programmable Control/Alarm/Re-transmission/Relay Outputs
  • Full Autotune PID with Fuzzy Logic Adaptive Control
While this item has an extended lead time, our 16B , 32B , DP20 , CND3 , 32A and CN1501 series offer similar specs and shorter wait times.
CNPT-Series
시작
재고가 있는 모델
1/32, 1/16, and 1/8 DIN Universal High Performance Controllers CNPT-Series CNPT-Series
loading all models
제품 개요
  • A/D Conversion 24-bit sigma delta
  • Accuracy Selectable
  • Accuracy Detail Process Voltage Accuracy: 0.03% Process Current Accuracy: 0.03% Thermocouple Accuracy: Type J: 0.4°C (0.7°F) Type K: 1.0°C (1.8°F), 0.4°C (0.7°F) Type T: 1.0°C (1.8°F), 0.4°C (0.7°F) Type E: -1.0°C (1.8°F), 0.4°C (0.7°F) Type R: 1.0°C (1.8°F), 0.5°C (0.9°F) Type S: 1.0°C (1.8°F), 0.5°C (0.9°F) Type B: 1.0°C (1.8°F), 0.5°C (0.9°F) Type C: 0.4°C (0.7°F) Type N: 1.0°C (1.8°F), 0.4°C (0.7°F) RTD Accuracy: Pt, 0.00385, 100 Ω, 500 Ω, 1000 Ω: 0.3°C (0.7°F) Pt, 0.003916, 100 Ω: 0.3°C (0.7°F) Pt, 0.00392, 100 Ω: 0.3°C (0.7°F) Thermistor Accuracy: 2252 Ω: 0.2°C (0.35°F) 5K Ω: 0.2°C (0.35°F) 10K Ω: 0.2°C (0.35°F)
  • Additional Features 1 Programmable 3 Color Display
  • Approvals UL, cUL, CE, UKCA
  • CMRR 120 dB
  • Control Mode Ramp and Soak, Autotune, Adaptive Tune, PID Control, On-off control, Alarms, Remote Setpoint
  • Data Interface Note Connection: USB: Female micro-USB Ethernet: Standard RJ45 USB: USB 2.0 host or device Ethernet Standards Compliance: IEEE 802.3 10/100 Base-T autoswitching, TCP/IP, ARP, HTTPGET
  • External Fuse Required External Fuse Required: Time-Delay, UL 248-14 Listed: 100 mA/250 V; 400 mA/250 V (low voltage option) ; Time-Lag, IEC 127-3 Recognized: 100 mA/250 V; 400 mA/250 V (low voltage option)
  • Impedance Input Input Impedances: Process/Strain: 10M Ω for ± 100 mV, 1M Ω for other voltage ranges; Process Current: 5 Ω; Thermocouple: 10K Ω max ; Auxiliary Input (Remote Setpoint): 3.5K Ω for 0 to 10V, 50K Ω for 0 to 1V, 50 Ω for current
  • Input Type Thermocouple, RTD, Thermistor, mA, Voltage, Strain
  • Input Voltage -100 to 100 mV, -1 to 1 Vdc, -10 to 10 Vdc
  • Isolation ISOLATION Power to Input/Output: 2300 Vac per 1 min test; 1500 Vac per 1 min test (low voltage/power option) Power to Relays/SSR Outputs: 2300 Vac per 1 min test Relays/SSR to Relay/SSR Outputs: 2300 Vac per 1 min test RS232/RS485 to Inputs/Outputs: 500 Vac per 1 min test
  • Length 127 mm
  • Current, Max 4 to 20 mA, 0 to 24 mA scalable
  • Measurement Type Current, Strain, Temperature, Voltage
  • Measuring Range Process Voltage: ± 50 mV, ± 100 mV, ± 1, ± 10 Vdc Process Current: Scalable within 0 to 24 mA Thermocouple: Type J: -210 to 1200°C Type K: -270 to -160°C, -160 to 1372°C Type T: -270 to -190°C, -190 to 400°C Type E: -270 to -220°C, -220 to 1000°C Type R: -50 to 40°C, 40 to 1788°C Type S: -50 to 100°C, 100 to 1768°C Type B: 100 to 640°C, 640 to 1820°C Type C: 0 to 2320°C Type N: 250 to -100°C, -100 to 1300°C RTD: Pt, 0.00385, 100 Ω, 500 Ω, 1000 Ω: -200 to 850°C Pt, 0.003916, 100 Ω: -200 to 660°C Pt, 0.00392, 100 Ω: -200 to 660°C Thermistor: 2252 Ω: -40 to 120°C 5K Ω: 30 to 140°C 10K Ω: 20 to 150°C
  • Number of Inputs 1
  • Operating Temperature, Max 50 °C
  • Operating Temperature, Min 0 °C
  • Polarity Bipolar
  • Ramp and Soak Profiling
  • Relative Humidity 90% RH, non-condensing
  • Remote Setpoint Current, Voltage
  • Resolution 0.1° temperature; 10 µV process
  • RTD Type 100/500/1000 Ω Pt sensor, 2-, 3- or 4-wire; α= 0.00385, 0.00392 (100 Ω only), or α=0.003916 (1000 Ω only)
  • Sampling Rate 20 Hz (20 updates/second)
  • Series ID CNPT-Series
  • Set Point Adjustment Menu Configurable
  • Temperature Stability Temperature Stability:RTD: 0.04°C/°C;Thermocouple @ 25°C (77°F): 0.05°C/°C (cold junction compensation);Process/Strain: 50 ppm/°C
  • Thermistor Type 2252 Ω, 5K Ω, 10K Ω
  • Warm-Up to Rated Accuracy 30 min

Supported Applications

The PLATINUM Series is a family of universal, high-performance temperature, process and strain controllers offered in 1/32 DIN, 1/16 DIN and 1/8 DIN panel sizes with single or dual displays. Built for demanding industrial control, they combine high accuracy, broad input support and full programmability in a compact panel-mount package.

A single controller accepts a wide span of sensors and signals, so one platform can be standardized across a plant:

  • Thermocouples: types J, K, T, E, R, S, B, C and N.
  • RTDs: Pt 100, 500 and 1000 Ω elements on selectable curves.
  • Thermistors and process voltage/current inputs, plus strain.

PID, On/Off and manual control modes with autotune, two setpoints and two alarms let the controller handle heating, cooling and general process loops. Front bezels are rated NEMA 4 (IP65) on 1/32 and 1/16 DIN models and NEMA 1 on 1/8 DIN models, and the controllers carry UL, cUL, CE and UKCA marks with a 5 year warranty.

Operating Conditions & Performance

A 24-bit ADC delivers up to 20 samples per second, and temperature resolution is 0.1°C or 0.1°F. Process and strain inputs are accurate to 0.03% FS, while thermocouple and RTD accuracy is specified by type. Representative input ranges and accuracies include:

  • Type J: -210 to 1200°C (-346 to 2192°F), accurate to 0.4°C (0.7°F).
  • Type K: -160 to 1372°C (-256 to 2502°F), to 0.4°C (0.7°F).
  • Type T: -190 to 400°C (-310 to 752°F), to 0.4°C (0.7°F).
  • Type E: -220 to 1000°C (-364 to 1832°F), to 0.4°C (0.7°F).
  • Type R: 40 to 1788°C (104 to 3250°F), to 0.5°C (0.9°F).
  • Type S: 100 to 1768°C (212 to 3214°F), to 0.5°C (0.9°F).
  • Type B: 100 to 640°C (212 to 1184°F), to 0.5°C (0.9°F).
  • Type C: 0 to 2320°C (32 to 4208°F), to 0.4°C (0.7°F).
  • Type N: -100 to 1300°C (-148 to 2372°F), to 0.4°C (0.7°F).
  • RTD (Pt, 100 Ω): -200 to 850°C (-328 to 1562°F), to 0.3°C (0.7°F).

Process inputs cover ±50 mV, ±100 mV, ±1 and ±10 Vdc voltage and a scalable 0 to 24 mA current range. The controller operates from 0 to 50°C (32 to 122°F) at 90% RH non-condensing and stores at -20 to 70°C. Input-to-output, input-to-power and output-to-power isolation is 1500 VAC.

Standard power is a universal 90 to 240 Vac ±10%, 50 to 400 Hz or 110 to 375 Vdc supply, with a low-voltage option of 12 to 36 Vdc (20 to 36 Vdc for dual-display or Ethernet builds). Firmware-selectable sensor excitation is available at 5V, 10V, 12V and 24V, and the analog current output drives at least a 500 Ω load.

Configuration Options

The lineup differs by panel size, display and, above all, output configuration. The order code is CN<Size>Pt-<Output Code>, where the numeric output code sets how many outputs are fitted and what type each one is. Output hardware options include:

  • SPST and SPDT relays rated 250 Vac or 30 Vdc at 3 A.
  • SSR rated 20 to 265 Vac.
  • DC pulse at 10 Vdc, and an isolated DC pulse and isolated analog option.

Because outputs are ordered as combinations, a 1/32 DIN CN32Pt-330 fits dual SPDT relays, a CN32Pt-305 pairs an SPDT relay with an analog output, and a CN32Pt-224 adds a third DC-pulse output to twin 0.5 A SSRs. Dual-display CN16DPT models such as the CN16DPT-220 bring the same output flexibility to a two-line display. Not every option is available on the smaller 1/16 and 1/8 DIN models, so the size and output code are chosen together.

Key Product Differences

Base models span the three panel sizes - CN32Pt (1/32 DIN), CN16Pt and dual-display CN16DPT (1/16 DIN), and CN8Pt (1/8 DIN) - each ordered with a numeric output-code suffix. Examples from the ordering table include:

  • CN32Pt-330 - 1/32 DIN, dual SPDT relays, single display.
  • CN32Pt-304 - 1/32 DIN, SPDT relay plus DC pulse.
  • CN32Pt-145 - 1/32 DIN, SPST relay, DC pulse and analog.
  • CN16Pt-145 - 1/16 DIN, SPST relay, DC pulse and analog.
  • CN16DPT-220 - 1/16 DIN dual display, twin 0.5 A SSRs.

Ordering suffixes add communications and I/O expansion: -EIP for Ethernet with an embedded web server, -C24 for isolated RS232/RS485, and expansion boards such as -006 (isolated analog output), -770 (two isolated DC pulse outputs), -110 (two isolated SPST relays) and -220 (two isolated SSR outputs). The -DC power suffix specifies 12 to 36 Vdc operation.

Physically, CN32Pt, CN16Pt and CN16DPT models are 48 H x 48 W x 127 mm D (1.89 x 1.89 x 5"), the 1/32 DIN cutout is 48 x 24 mm, and the CN8DPT dual display uses 21 mm (0.83") and 10.2 mm (0.40") digit heights, letting the family match panel space and readability to the application.

액세서리

accessories

Clé USB double extrémité 1 Go (Micro mâle et standard mâle)
C$51.80 / each
19 재고 있음

cables

Adaptateur USB standard vers Micro USB
C$25.15 / each
16 재고 있음
Câble USB Micro vers Standard avec connecteur de montage sur panneau
C$50.93 / each
14 재고 있음
CN32PT16PT16DPT8PT8DPT8EPT-330-220-304-305-440-224-225-144-145-444-445-006-110-116-220-226-770-776-C24-EIP-DC
DIN Size / Display
Output Configuration
Isolated Output Configuration
Serial Communications
Ethernet Communications
Power Source
en-CA
ko_KR
설정 저장