검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

Series-100AV

유속 및 압력 측정 키트 (마노미터 및 피토관 포함)

  • 플라스틱 본체 - 두께 1인치의 견고한 아크릴 블록으로 사실상 깨지지 않음. 안정적이며 변형 위험이 없음.
  • 드릴링된 보어 - 영구적으로 휨이 없으며 변형으로 인한 재교정이 필요 없음.
  • 반사 크롬 마감 눈금 - 시차 오류를 쉽게 제거함. 조절 가능하며 엄지나사 잠금으로 간편한 영점 조정 가능. (모델 125 AV는 나사 플런저로 영점 설정 조정).
  • 적색 게이지 유체 - 비중 0.826. 높은 습윤성으로 잘 형성된 읽기 쉬운 메니스커스 형성.
  • 수평 조정 - 나사로 빠르고 정확한 수평 조정 가능. 일체형 연마 유리 기포 수평계가 즉시 참조 제공.
Series-100AV
시작 2,305,420 원
유속 및 압력 측정 키트 (마노미터 및 피토관 포함) Series-100AV Series-100AV
loading all models
제품 개요
  • 공기 속도, 최소 400 FPM
  • 보정 옵션 해당 없음
  • 충전 유체 적색 게이지 유체
  • 하우징 높이 13.5 in
  • 하우징 길이 10 in
  • 하우징 폭 2.5 in
  • 측정 유형 압력
  • 작동 온도, 최대 150 °F
  • 포트 1 크기 3/16인치
  • 포트 1 유형 호스 바브 피팅
  • 포트 2 크기 3/16인치
  • 포트 2 유형 호스 바브 피팅
  • 압력(경사), 최대치 2 inH₂O
  • 압력(경사), 최소 0.2 inH₂O
  • 압력(수직), 최대 0 inH₂O
  • 증명압 최대 100 psi
  • 스케일 위치 경사형
  • 시리즈 ID Series-100AV

Supported Applications

The Dwyer Series 100 AV Durablock® Air Velocity Gage Kits are designed to measure air velocity, static pressure, vacuum, and differential pressure. The series supports applications including furnace draft measurement and air filter pressure drop assessment.

Operating Conditions & Performance

The kits accommodate total pressures up to 100 psig (6.89 bar) and temperatures up to 150°F (65.6°C). The gages are machined to tolerances of ±0.002".

  • Model 102-AV: Pressure range 0-2.0 inches of water; velocity range 400–5500 feet per minute with minor scale divisions of .02 and a scale length of 8-1/4".
  • Model 115-AV: Pressure range 0-.25 inches of water (noted as .05-0-.25 in specifications); velocity range 400–2000 feet per minute with minor scale divisions of .005 and a scale length of 6".

For accuracy of ±2% in laboratory applications, the duct diameter must be 4" (8.64 mm) or greater. Accurate traverse requires smooth straight duct sections 10 diameters in length with an egg crate type straightener provided upstream from the Pitot tube.

Air velocity indications are calibrated for dry air at 70°F (21.3°C), 29.9" Barometric Pressure, and a resulting density of .0755 lb/cu. ft. Corrections may be based on provided formulas for other conditions.

Configuration Options

The series includes Models 102-AV and 115-AV housed in solid acrylic plastic (1" thick) with reflective chrome finish scales adjustable via thumbscrew locking. Each kit contains a stainless steel Pitot tube, two 9' lengths of rubber tubing with connectors, extra red gage fluid (826 specific gravity), magnetic mounting clips, an air velocity calculator slide rule, instruction card H-7, bulletin H-11, and a carrying case.

  • Model Dimensions:

Model 102-AV: A = 8-1/4", B = 4-5/16". Model 115-AV: A = 9-1/2", B = 3-1/16".

  • Carrying Case Dimensions:

Both models utilize a carrying case measuring 13-1/2 X 10 X 2-1/2 inches. The Pitot tube included is Model 166-12 with a length of 12".

Key Product Differences

The primary distinction between the available models lies in their measurement ranges and scale resolutions tailored for different velocity profiles. Model 102-AV covers higher velocities (400–5500 feet per minute) with a pressure range of 0-2.0 inches of water, while Model 115-AV is configured for lower velocities (400–2000 feet per minute) and finer resolution on the low-pressure scale (.005 minor divisions).

Design features common to both include a plastic body made from a 1" thick solid acrylic block, drilled bores permanently free of bends, leveling adjustment with an integral ground glass bubble level, and red gage fluid. Note that Model 125 AV uses a screw plunger to adjust zero setting; this feature is not applicable to Models 102-AV or 115-AV.

Use only Dwyer gage fluid with these instruments. Clean the units with mild soap and water only, as other fluids, solvents, or cleaning agents may damage the gage.

ko-KR
ko_KR
설정 저장