Salta alla ricerca Salta al contenuto principale Salta alla navigazione

Italia 800 906 907 | Internazionale +39 022 333 1521 | Benvenuti sul nostro nuovo sito web. Avete riscontrato un problema o un bug? Segnalatelo qui.

Abbiamo notato che ti trovi in , visita il tuo sito locale facendo clic sul link qui sotto per offerte e supporto regionali.

SAP-RTD-Series

Sensore RTD con piastra adesiva

Adhesive Pad RTD Sensor
  • Made of silicone rubber for excellent flexibility
  • Self-adhesive thin backing to increase response time
  • Attach directly to clean surface for accurate temperature measurement
  • Made for one-time placement on surface via self-adhesive pad
SAP-RTD-Series
Da TWD133,686 원
Adhesive Pad RTD Sensor SAP-RTD-Series SAP-RTD-Series
loading all models
Panoramica del Prodotto
  • Accuracy Class A
  • Electrical Connection Stripped Leads
  • Insulation PFA
  • Nominal Resistance 100 Ω
  • Number of Wires 4
  • Process Temperature, Max 200 °C
  • Process Temperature, Min -50 °C
  • Series ID SAP-RTD-Series
  • Temperature Sensor Type RTD
  • Wire Gauge 24 AWG

Supported Applications

The Omega SAP-RTD-Series consists of adhesive pad RTD sensors designed to take surface temperature measurements. These self-adhesive silicone pads are intended for use on both flat and curved surfaces. Documented applications include hot plate measurements, pipe measurements, and direct connection to instrument casings or motor housings to obtain accurate temperature readings.

Operating Conditions & Performance

The series operates within a measurement range of -50 to 200°C (-58 to 392°F). The sensing element is a 100 Ω Platinum RTD configured with 4-wire leads. Construction features an integral RTD element bonded onto the inner surface of exposed silicone material, which provides faster temperature response compared to non-bonded configurations.

Configuration Options

The SAP-RTD-Series is configurable across pad designations, wire lengths, and termination styles. The series supports two primary mounting geometries:

  • SAPC: Pad for curved surfaces (0.59 X 1.97 X 0.29 in / 15 x 50 x 7.4 mm).
  • SAPF: Pad for flat surfaces (1.41 x 0.48 x 0.29 in / 35 x 12 x 7.4 mm).

Standard wire lengths are available at 40, 80, and 120 inches, with other lengths offered as options. The lead wire is PFA-coated, 24 AWG. Termination defaults to stripped ends, though connector options are available.

Model Number Configuration

The series follows a specific model number guide: <PAD DESIGNATION> - <RTD TYPE> - <WIRE CONFIGURATION> - <ELEMENT RESISTANCE> - <TERMINATION> - <WIRE LENGTH>. An example configuration is SAPC-RTD-4-100-A-80, representing a self-adhesive silicone RTD sensor with 100 Ω resistance and 80 inches of PFA-coated lead wire.

Key Product Differences

Variants within the series are distinguished by pad geometry (SAPC for curved surfaces versus SAPF for flat surfaces) and standard or custom wire lengths. All variants utilize a silicone rubber housing material with an adhesive backing for surface mounting. The electrical configuration remains consistent across the family as a 100 Ω Platinum RTD with 4-wire leads.

it-IT
ko_KR
Salva Configurazione