検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

SGN-SpanResistors

スパン抵抗器 ひずみゲージブリッジの温度補償

  • 大量注文で迅速即納!
  • 在庫あり、1週間以内に発送!
  • 5個パックでお得な価格
SGN-SpanResistors
販売元 ¥ 6,030
スパン抵抗器 ひずみゲージブリッジの温度補償 SGN-SpanResistors SGN-SpanResistors
loading all models
製品の概要
  • 導体厚さ 20 μm
  • ケース材質 ポリイミド
  • カプセル化の厚さ 25 μm
  • 動作温度(最高) 100 °C
  • 動作温度(最低) 0 °C
  • パックサイズ 5
  • 抵抗許容差 ± 1 Ω
  • シリーズID SGN-SpanResistors
  • 抵抗の温度係数 0.6%/°C

Supported Applications

The Omega SGN Span Resistors series provides temperature compensation for strain gage bridges. These resistors are designed to compensate for temperature-induced resistance changes in strain gage circuits. The product line includes span temperature-compensation resistors, as well as bridge-balancing and zero temperature-compensation resistors.

Operating Conditions & Performance

The series offers distinct performance envelopes based on the foil material and construction type:

  • Nickel Foil (SGN-E, SGN-PN): Features a temperature coefficient of resistance of 0.6%/°C (0.34%/°F) with an operating range of 0 to 100°C (32 to 212°F).
  • Nickel Foil Zero Compensation (RES-N): Operates within the same 0 to 100°C (32 to 212°F) range with a temperature coefficient of resistance of 0.6%/°C (0.34%/°F).
  • Constantan Foil Zero Compensation (RES-C): Designed for an extended operating range of -75 to 200°C (-100 to 392°F). The temperature coefficient is not specified in the source data.

All models utilize a polyimide carrier with a substrate thickness of 20 microns. Encapsulated and open-face span resistors feature a foil measuring grid that is 5 microns thick, while zero compensation resistors also use a 5-micron-thick foil (Constantan or Nickel). The resistance tolerance for all listed models is ±1 Ω.

Configuration Options

The series supports multiple configurations to address specific circuit requirements:

  • Sensor Types: Available as encapsulated span temperature-compensation resistors (SGN-E), open-face span temperature-compensation resistors (SGN-PN), and bridge-balancing/zero temperature-compensation resistors (RES-C, RES-N).
  • Nominal Resistance Values: Span resistors are offered in nominal resistance values including 10 Ω, 12 Ω, 14 Ω, 16 Ω, 20 Ω, 24 Ω, 25 Ω, 28 Ω, 30 Ω, 32 Ω, 34 Ω, 36 Ω, 48 Ω, and 60 Ω. Zero compensation resistors are available in 2 Ω and 5 Ω.
  • Model Numbering: The series follows the convention SGN---, such as SGN-2/20-E or SGN-4/28-PN. Zero compensation models follow patterns like RES-2C and RES-5N.
  • Physical Dimensions: Grid dimensions (Active gage length A, Active gage width B) and carrier matrix dimensions (Matrix length C, Matrix width D) vary by series number (SGN-2, SGN-3, SGN-4). For example, the SGN-2 series has a grid of 1.9 mm x 3 mm, while the SGN-4 series features a 4 mm x 3.2 mm grid.

Key Product Differences

The primary distinction within the span resistor family is between encapsulated (E) and open-face (PN) constructions. Both types utilize Nickel foil measuring grids on polyimide carriers but differ in their physical protection profile. The zero temperature-compensation resistors are differentiated by material: RES-C models use Constantan foil for a wider operating range (-75 to 200°C), whereas RES-N models use Nickel foil (0 to 100°C). Dimensional variations correspond directly to the series number in the model code, with SGN-2, SGN-3, and SGN-4 indicating specific grid and carrier sizes.

ja-JP
ja_JP
設定を保存する