検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

KHA-KIT-Series

ポリイミドフレキシブルヒーターサンプルキット 15種類のヒーター

  • -56ºC~200ºC(-70ºF~392ºF)の温度極限に耐える
  • 優れた引張強度と引き裂き抵抗
  • 低アウトガス
  • ワット数 2.5、5、または 10 W/in2
KHA-KIT-Series
販売元 ¥ 71,907
ポリイミドフレキシブルヒーターサンプルキット 15種類のヒーター KHA-KIT-Series KHA-KIT-Series
loading all models
製品の概要
  • 直径 0 in
  • 誘電強度 1000 Vac
  • 元素形状 長方形/円形
  • ヒーター電力 複数 W
  • 長さ 0 in
  • 動作温度(最高) 200 °C
  • 動作温度(最低) -200 °C
  • パワー密度、最大 2.5、5、または10 W/in²
  • 圧力感応接着剤(PSA) true
  • シリーズID KHA-KIT-Series
  • 供給電圧 28 Vac/VDC、115/230 Vac/Vdc
  • 幅 0 in

Supported Applications

The Omega KHA-KIT-EFH-15001 Polyimide Flexible Heater Sample Kit provides thin, flexible heaters with adhesive backing designed to conform to flat or curved surfaces. The kit includes 15 different heater shapes outlined on a single sheet for easy selection and cutout. Documented applications include aerospace, analytical equipment, tooling, commercial equipment, agriculture, packaging, and material handling.

Operating Conditions & Performance

The polyimide heaters operate within a process temperature range of -200 to 200°C (-328 to 392°F). The pressure-sensitive adhesive backing supports continuous use up to 149°C (300°F) and short time periods up to 232°C (450°F). Each heater element has a thickness of 0.203 mm (0.008") with a dielectric strength minimum of 1000 Vac. Resistance values are nominal with a tolerance of ±10%. All kit heaters require either a temperature or power controller to regulate heater temperature.

Configuration Options

The KHA-KIT-EFH-15001 sample sheet measures 0.3 x 0.3 m (1x1') and contains the following configurable shapes:

  • Square/Rectangular Shapes: 0.5 x 2.0, 0.75 x 2.5, 0.75 x 3.25, 1.0 x 1.0, 1.0 x 3.0, 1.0 x 6.0, 1.5 x 4.5, 1.5 x 8.0, 2.0 x 3.0, 2.5 x 1.25, 2.5 x 2.5, and 3.0 x 3.0 (inches).
  • Circular Shapes: 1.5 Dia., 2.0 Dia., and 3.0 Dia. (inches).

Heaters can be combined to provide various resistances and wattages. Electrical connections are made by soldering leads or using alligator clips. Lead wire preparation requires stripping about 1/4", scrubbing with a fiberglass brush, flattening strands, and tinning with high-temperature solder (97.5% lead, 1.5% silver, 1% tin) at approximately 288°C (550°F). A PTFE-insulated lead wire is recommended for energizing the heater.

Power supply options include 115 or 230 Vac. Recommended lead-wire gage depends on current draw, ranging from AWG 28 to AWG 14 based on maximum currents of 1.25 A up to 20 A as detailed in the specification tables.

Key Product Differences

The series is offered as a single sample kit model: KHA-KIT-EFH-15001, described as a Polyimide flexible heater sample kit with 15 different shapes. The product overview notes chemical resistance to many solvents and oils.

ja-JP
ja_JP
設定を保存する