検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

SP-013-Series

Omega Link M12 モジュラー スマート デジタル インターフェース カウンター/トータライザー

  • パルスレート、パルス幅、パルスデューティサイクル、およびパルス遅延の監視
  • アップ/ダウンカウンター
  • 2x デジタルI/O
  • SYNC構成ソフトウェアによるソフトウェア設定可能
SP-013-Series
販売元 ¥ 24,897
Omega Link M12 モジュラー スマート デジタル インターフェース カウンター/トータライザー SP-013-Series SP-013-Series
loading all models
製品の概要
  • 承認 CE、UKCA
  • コンフィグレーション Omega Link Smart InterfaceおよびSYNC構成ソフトウェアで設定可能
  • デジタル入力 VinHighThreshold = 2.2 VMAX、VinLowThreshold = 0.3 VMIN、VinMAX = 30 VDC
  • デジタル出力 2x オープンドレイン 100 mA 最大、VMAX = 30 Vdc
  • エンクロージャーの定格 IP67
  • 入力制御信号 電流ループ:4〜20mA、電圧:0〜1.0Vdc、0〜2.0Vdc)
  • 入力注 ON: 1.0 Vdc、OFF: 0.7 Vdc、内部プルアップ/ダウン: 1.5k~3.0 Vdc、コンパレータ(パルス)入力: 100 mV、500 mV、1.0 Vdc、2.0 Vdc
  • 長さ 96.7 mm
  • チャンネル数 1
  • I/Oの数 2
  • 動作温度(最高) 85 °C
  • 動作温度(最低) -40 °C
  • シリーズID SP-013-Series
  • ソフトウェア OEG、SYNC、およびOMEGA Cloudと互換性あり
  • 電源タイプ DC
  • 供給電圧 2.8から3.3 Vdc
  • 幅 22.1 mm

Supported Applications

The Omega SP-013 Series is an Omega Link Digital Pulse Input Smart Probe designed to integrate digital pulse inputs into the Omega Link Ecosystem. The series supports monitoring of on/off states, pulse rates, duty cycles, and pulse delays. It functions as a rate meter for frequency measurements and provides up/down counting capabilities. Additionally, the SP-013 can operate as an edge controller with autonomous decision-making features.

The device is compatible with Omega Link Cloud environments and Modbus Networks via various wireless and wired interfaces. Supported measurement types include Frequency (Rate), Up Counter, Up/Down Counter, Pulse Width ($T_{PW}$), Pulse Delay ($T_{PD}$), Duty Cycle, Current Loop output simulation, and Voltage output simulation.

Operating Conditions & Performance

The SP-013 Series operates within an ambient temperature range of -40 to 85°C (-40 to 185°F). The device features a modular M12 construction with an IP67 enclosure rating when mated. Power is supplied via the connector at 2.8 VDC to 3.3 VDC, drawing up to 100 mA.

Performance specifications vary by measurement mode:

  • Frequency (Rate): Ranges from 0.01 Hz to 100 Hz and 100 Hz to 1000 Hz, with accuracy of ±0.5% or ±1 Hz averaged over 1 sec.
  • Counters: Up Counter range is 0 to +8388608; Up/Down Counter range is -8388608 to +8388608, with accuracy of ±1 Count Max for both modes.
  • Pulse Width ($T_{PW}$) and Pulse Delay ($T_{PD}$): Minimum measurement time is 200 µS; accuracy is ±50 µS ±1%.
  • Duty Cycle: Range of 1% to 99%, with accuracy of ±1.5% Max.
  • Current Loop Output Simulation: Range 0 - 24 mA, resolution ±0.1 mA, accuracy ±0.2 mA.
  • Voltage Output Simulation: Ranges include 0 - 1.0 VDC and 0 - 2.0 VDC with resolutions of ±10 mV and accuracies of ±10 mV or ±20 mV respectively.

The device supports data/event logging for over 10,000 samples and includes integrated alarm and control functions secured by password protection.

Configuration Options

The series is available in the SP-013-1 model configuration. The hardware features a mixed-mode operation supporting both digital inputs and process inputs via M12 connectors:

  • M12 5-Pin Female Connector (Input/Power): Provides Excitation Power (Pin 1), Ground Reference (Pin 3), DIN 0/Pulse A (Pin 2), DIN 1/Reset (Pin 5), and a configurable Pin 4 for DIN 2, Enable, Direction, Pulse B, or Process 0.
  • M12 8-Pin Male Connector (Output/Data): Provides Power Supply (3.3VDD on Pin 8), Power Ground (Pin 7), Discrete I/O Signal 0 and 1 (Pins 1 and 6), Interrupt Signal (INTR, Pin 2), Shield Ground (Pin 5), and I2C communication signals SCL and SDA (Pins 3 and 4).
  • Discrete I/O: The device includes two digital I/O channels capable of functioning as inputs or outputs.

The series supports software configurability via SYNC configuration software. It is certified with CE and UKCA approvals.

Key Product Differences

The SP-013 Series includes the following specific model:

  • SP-013-1: Digital Interface Smart Probe with discrete I/O.

Accessories and interface options available for integration include M12 field install connectors (5-pin and 8-pin), T-Splitters, various cable lengths (1m, 3m, 5m) in straight or right-angle configurations, Wired USB/RS485 Smart Interfaces, Wireless Sub GHz interfaces (-915 MHz / -868 MHz), and Omega Link Gateways supporting Ethernet, Modbus RTU/TCP, and LTE connectivity.

アクセサリー

cables

M12-8 pin Straight Plug Field install connector with screw terminals
¥3,807 / 各
0 在庫あり
Dual M12 Cables for Sensors and Transmitters
¥10,363 / 各
0 在庫あり
Dual M12 Cables for Sensors and Transmitters
¥10,363 / 各
0 在庫あり

signal conditioners

ja-JP
ja_JP
設定を保存する