한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
SCE-ELJSS
NEMA 4X 304/316 스테인리스 스틸 접합함 실외 및 세척용
NEMA 4X 304/316 ステンレス鋼 ジャンクションエンクロージャー 屋外および洗浄対応
재고가 있는 모델
- 0.063インチ ステンレス鋼 タイプ304および316
- 継ぎ目は連続溶接および研磨仕上げ
- ドア開口部の全周にフランジトラフカラー付き
- 耐油ガスケット
제품 개요
- クロージャータイプ タイプ4 エンバイロライン ジャンクションエンクロージャ
- 仕上げ #4 ブラッシュド仕上げ
- シリーズID SCE-ELJSS
Supported Applications
The Omega SCE-ELJSS Series consists of NEMA Type 4X Enviroline® junction enclosures constructed from Stainless Steel Types 304 and 316. These units are designed to house electrical controls, instruments, and components in areas that may be regularly hosed down or exposed to very wet or oily conditions. The series provides protection against dust, dirt, oil, and water ingress.
For outdoor applications, a drip shield is recommended with this enclosure family.
Operating Conditions & Performance
The SCE-ELJSS Series meets the following environmental ratings:
- NEMA Type 4, 4X, 12 & 13
- UL Listed Type 4, 4X & 12
- CSA Type 12, 4, & 4X
- IEC 60529 IP 66
The enclosures are constructed from 0.063" Stainless Steel Type 304 and 316.
Configuration Options
The series is available in multiple sizes defined by height, width, and depth dimensions (in inches). Model numbers follow the format SCE-<HEIGHT><WIDTH><DEPTH>ELJSS for Type 304 Stainless Steel or SCE-<HEIGHT><WIDTH><DEPTH>ELJSS6 for Type 316 Stainless Steel. Available configurations include:
- Door Operation: Doors open 180° with a removable hinge.
- Latching Mechanism: Black Mini ¼ Turn Latches that are opened or closed with a screwdriver.
- Gasketing and Sealing: Includes sealing washers, hole plugs, and an optional Oil-Resistant Gasket.
- Mounting Features: Mounting feet included; standoffs provided for mounting optional sub-panels. Panels can be special ordered in Stainless Steel.
- Grounding: Ground stud on door and body.
Latch configuration varies by enclosure height: one latch centered vertically if height is ≤ 355.6 (14); two latches located 76.2 (3) from top and bottom of door if height is > 355.6 (14); three latches are required if height is > 508 (20).
Key Product Differences
The primary distinction within the SCE-ELJSS Series is the stainless steel grade:
- Type 304 Stainless Steel: Identified by model numbers ending in ELJSS (e.g., SCE-604ELJSS).
- Type 316 Stainless Steel: Identified by model numbers ending in ELJSS6 (e.g., SCE-604ELJSS6).
The series offers a range of external dimensions, with heights ranging from 6.00 to 16.00 inches and corresponding width/depth combinations as listed in the specification table.
PDF 및 매뉴얼