検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

TJP

3極TCおよびRTDコネクタ付きジャックパネルアセンブリ

3-프롱 TC 및 RTD 커넥터가 있는 잭 패널 어셈블리
  • 完全組立済み
  • スナップインジャック
  • 包装に番号ラベル付属
  • 簡単取り付け
3-프롱 TC 및 RTD 커넥터가 있는 잭 패널 어셈블리 TJP TJP
loading all models
製品の概要
  • 穴間隔直径 0.1875 in
  • パネルの厚さ 0.0938 in
  • シリーズID TJP

Supported Applications

The Omega TJP series consists of jack panel assemblies designed for use with RTDs, thermistors, and shielded thermocouples. These panels provide a connection interface that extends the versatility typically associated with thermocouple systems to sensors requiring three lead wires.

Operating Conditions & Performance

The TJP snap-in jacks feature 3 female terminals compatible with any 3-prong OTP male connector (specifically the OTP-U-M). The panel jacks are constructed from rugged, high-impact plastic and accommodate wire sizes up to 14 AWG. Alloys used in the connectors match ANSI thermocouple grade calibrations.

Key performance parameters include:

  • Maximum Service Temperature: 205°C (400°F)
  • Housing Material: 2.4 mm (³⁄₃₂") anodized aluminum
  • Mounting Cutout Dimensions: Rectangular cutout of 55.62 mm (2.19") height, 24.6 mm (.97") width, and 41.4 mm (1.63") depth with a 16.12 mm (0.635") cutout width.
  • Hole Spacing: ⅜" on both sides; requires a ⅜" diameter hole for #8 screw mounting.

Configuration Options

The TJP series is configurable across multiple circuit densities and row configurations. Model numbers follow the format TJP<ROWS>-<CIRCUITS PER ROW>-[*], where the final character denotes the thermocouple calibration or a blank configuration.

Panel Configurations

Panels are available in 1, 2, 3, and 4-row layouts with varying circuit counts per row:

  • 1 Row (76 mm / 3" H): Available with 6, 12, or 18 circuits.
  • 2 Rows (133 mm / 5¼" H): Available with 12, 24, or 36 circuits.
  • 3 Rows (203 mm / 8" H): Available with 18, 36, or 54 circuits.
  • 4 Rows (254 mm / 10" H): Available with 24, 48, or 72 circuits.

Sensor Compatibility & Options

The series supports the following thermocouple types by inserting J, K, T, E, N, or U into the model number. Blank panels are also available for custom labeling. Additional options include:

  • Custom color-coded anodized panels (minimum order $1,000).
  • Male plugs supplied in place of female jacks upon request.
  • I.D. labels supplied loose for field identification; extra ID number label ranges are available from Model 1-6L through Model 1-100L.

Key Product Differences

Variants within the TJP series differ primarily by physical dimensions (determined by row count and circuits per row) and sensor compatibility. The model number suffix indicates the specific thermocouple calibration supported, such as Type K or Type J, while "BLANK" variants provide unmarked panels for user-defined identification.

Assembly is performed at no extra cost for standard configurations. Non-standard panel requirements require a minimum order quantity and consultation with Omega's Custom Engineering Department.

TJP1234-0612182436485472-J-K-T-E-U-N-R/S-BLANKI
로우 수
총 회로 수
열전대 보정
색상 코드 표준
ja-JP
ja_JP
設定を保存する