한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
DP41-S-Series
고성능 스트레인 미터, 고해상도 6자리 디스플레이
高性能ストレインメーター、高解像度6桁表示- 스트레인 게이지 브리지 센서 또는 비례 전압 센서와 호환 가능
- 최대 13Hz까지 조절 가능한 필터링
- 최대 999,999 카운트 표시
- NEMA-4 전면 패널
제품 개요
- 정확도 ± 0.005%
- 아날로그-디지털 변환 방식 듀얼 슬로프
- CMRR 120 dB
- 공통 모드 전압 1500 Vp 고전압 시험당
- 컷아웃 치수 1.772 x 3.622 인치
- 디스플레이 노트 빨간색 6자리, 14세그먼트, 13.7 mm (0.54") 높이; 4개의 알람 표시기
- 디스플레이 유형 LED
- 폼팩터 1/8 DIN
- 높이 1.89 in
- 입력 구성 전면 패널 버튼 또는 컴퓨터를 통해 조작
- 입력 범위 사양 참고 0~100 mV, 0~1V, 0~5V, 1~5V, 0~10V, 0~100V, ± 50 mV, ± 500 mV, ± 5V, ± 50V, 0~20 mA, 4~20 mA
- 입력 유형 싱글 엔디드, 스트레인
- 내부 결의서 15비트
- 길이 6.5 in
- 재료 폴리카보네이트
- 측정 유형 변형
- 장착 패널
- NMRR 60 dB
- 표시 자릿수 6
- 입력 수 1
- 오프셋 조정 0 ~ 999999 또는 0 ~ - 99999 프로그래머블
- 작동 온도, 최대 50 °C
- 최소 작동 온도 0 °C
- 극성 단극/양극성, 프로그래머블
- 전력 소비 10 W
- 전력 소비 사양 참고 6 W 정격, 10 W
- 독서 속도 3초 또는 13초 초, 60Hz; 3/s 또는 12/s, 50 Hz
- 상대 습도 95% RH 비응축
- 해상도 15비트
- 샘플링 속도 13 Hz (초당 13회 업데이트)
- 센서 브레이크 보호 상향 또는 하향, 프로그래밍 가능
- 센서 여기 10 V에서 30 mA; 24 V에서 25 mA
- 시리즈 ID DP41-S-Series
- SetPoint 출력 4개 절연 오픈 콜렉터; 1V 싱크에서 정격 150mA, 30V 오픈
- 스팬 조정 0.00001 ~ 500,000까지, 프로그래밍 가능
- 경간 온도 계수 ± 20 ppm
- 단계적 응답 1초에서 99.9%
- 저장 온도, 최대 85 °C
- 보관 온도 최소 -40 °C
- 워밍업 시간 50분
- 무게 574 g
- 폭 3.78 in
Supported Applications
The DP41-S is a 1/8 DIN high-performance strain meter with a high-resolution 6-digit display, built for demanding industrial instrumentation. As the strain-gage member of the DP41 platform, it reads strain gages, load cells and potentiometers, and it also accepts DC voltage and current signals, making it a flexible front end for force, weight and process measurement.
A 14-segment LED display gives clear alphanumeric messaging, and the meter combines high accuracy with fast conversion for responsive readings. Alarm and control capabilities, isolated communications, analog retransmission and relay outputs let a single meter both display a bridge measurement and act on it.
The front panel is rated NEMA 4 (IP65) for wash-down and dusty environments, and the meter carries CE, UKCA and cULus marks. A red LED display is standard, with a green LED available at no charge.
Operating Conditions & Performance
The meter delivers a headline accuracy of ±0.005% rdg with a 15-bit resolution and a dual-slope conversion technique. Step response is 1 s to 99.9%, and the reading rate is 3 or 13 readings per second at 60 Hz (3 or 12 at 50 Hz) after a 50-minute warm-up to rated accuracy.
DC voltage and current ranges include:
- 0 to 100 mV and ±500 mV
- 0 to 5 V, 1 to 5 V, 0 to 10 V and 0 to 100 V
- ±5 V and ±50 V
- 0 to 20 mA and 4 to 20 mA
For strain-gage and load-cell bridges, selectable excitation is provided at 10 V at 30 mA or 24 V at 25 mA. The meter operates from 0 to 50°C (32 to 122°F) at 95% RH non-condensing and stores at -40 to 85°C (-40 to 185°F). Power is 115 or 230 Vac, 49 to 400 Hz, or 10 to 32 Vdc. Analog output covers 0 to 5 V, 0 to 10 V, 0 to 20 mA and 4 to 20 mA, with dual 7 A mechanical relays available as a board option.
Configuration Options
The model number is assembled as DP41 - <Input Type> - <Power> - <Communications> - <Output> - <Accessory>. Within this series the input is fixed as strain, so meters differ by power supply and by the communication, analog-output and relay options fitted.
Power and display options include:
- -230 - 230 Vac power.
- -DC - 10 to 32 Vdc isolated power.
- -GN - green LED display.
Capability expands through plug-in option boards, which correspond to the output and communication suffixes in the model number:
- DP40-A3 - analog output.
- DP40-S24 - isolated RS232/485 communications.
- DP40-B - isolated BCD output board.
- DP40-R - dual 7 A mechanical relays; DP40-R4 - dual 7 A and dual 1 A relays.
Key Product Differences
All configurations begin from the DP41-S strain-gage base and add power, communication, analog-output and relay suffixes, which is how the 16 orderable versions are built. Representative examples include:
- DP41-S - base strain-gage indicator.
- DP41-S-230 - 230 Vac power.
- DP41-S-DC - low-voltage 10 to 32 Vdc power.
- DP41-S-AR4 - analog output with relays.
- DP41-S-S2AR4 - communications, analog output and relays combined.
The DP41-S sits within a wider platform of 1/8 DIN indicators - including DP41-E (process voltage/current), DP41-W (NTEP weight), DP41-TC (thermocouple), DP41-RTD and DP41-U (universal), each also offered as a DP41Z split-display version. Accessories include the SPC4 and SPC18 NEMA 4 (IP65) splashproof lenses, the DP41-TBS bench stand, and the DPP-5 1/8 DIN panel punch. The meter measures 48 H x 96 W x 165 mm D (1.89 x 3.78 x 6.5") and weighs 574 g (1.27 lb).
PDF 및 매뉴얼
RoHS 2015/863 - 인증서 보기
CE 인증
UKCA
DP41-S-230-DC-A-R-R4-S2-S4-B-GN-AR4-S2A-S2AR4