Australia +61-2-4272 2055 | Welcome to our new website, found an issue or bug? Please report it here
Series-200-300
Durablock® Solid Plastic Low-Range Gas & Air Pressure Gauges, NIST Options
Durablock® 固体プラスチック低圧範囲ガス・空気圧力計、NISTオプション- 厚さ1インチのアクリルプラスチック製ボディは、ほぼ破損しない堅固なブロックで、安定しており、歪みの危険がありません。
- 穴あけされたボアは±0.0002インチの精度で曲がりやねじれがなく、歪みによる再校正は不要です。
- 高い濡れ性特性を持つ選定済みゲージ液は、一貫した形状の良いメニスカスを形成し、最も正確な読み取りを可能にします。
- 調整可能な反射研磨アルミスケールは、親指ねじロック付きで簡単にゼロ調整ができます。
- 視差のない読み取りは、メニスカスとスケールに反射したその像を合わせるだけで、最大の精度と一貫性を実現します。
- 過圧安全トラップは、範囲超過圧力や圧力サージによる液体の損失を防ぎます。(No. 215には不要です。)
- 傾斜型ゲージのレベリング調整は、ゲージの側面または底面のロック親指ねじを緩め、内蔵の感度の高いすりガラス気泡レベルを基準に調整して再締め付けするだけで行えます。
- 厚手のゲージ鋼製取り付けパネルはグレーハンマーロイド仕上げです。
- 精密な製造により、装置は最高基準を満たします。
- 標準ユニットはA-315 3/16インチ内径チューブコネクターを備えており、製品構成ツールでさらに多くの接続オプションがあります。
Series-200-300
From
¥
184,424
Product Overview
- 応用例 産業および製造業, 研究所と科学部門
- 校正オプション 該当なし
- 充填液 レッドゲージフルイド
- 測定タイプ 圧力
- 動作温度(最高) 150 °F
- 耐圧力 最大 100 psi
- シリーズID Series-200-300
- 重量 3 lb
Supported Applications
The Dwyer Series 200 & 300 Durablock® Solid Plastic Stationary Gages are designed for measuring low range gas and air pressures, including positive, negative, or differential readings. These inclined and vertical (well-type) manometers serve laboratory applications requiring high accuracy as well as general industrial service.
Documented measurement functions include:
- Air velocity
- Static pressure
- Furnace draft
- Air filter pressure drop
Operating Conditions & Performance
The series is constructed from solid plastic and utilizes Dwyer® gage fluid for operation. Cleaning should be performed with mild soap and water only, as other fluids or solvents may damage the instrument.
Ambient temperature limits are critical to device integrity: temperatures over 135°F will damage the gage. For laboratory applications requiring an accuracy of ±2%, extreme care is required during installation and testing. Specific precautions for this level of accuracy include using duct diameters ≥ 4", accurate traverse sketches, smooth straight duct sections, and egg crate type straighteners.
Field tests are expected to be accurate within plus or minus 5%. Air velocity indications provided by the instrument assume dry air at 70°F (21.3°C), 29.9" Barometric Pressure, and a resulting density of 0.075/cu. ft. Corrections for variations should be calculated using the provided formulas.
When checking inlet and discharge fan and blower pressures, air velocities above 700 ft. per min. (12.81 km/s) can cause an appreciable error.
Configuration Options
The Series 200 & 300 offers a range of inclined and vertical configurations with specific measurement ranges expressed in inches water column, millimeters water column, or centimeters water column. Available models include the 200 series (inclined) and 300 series (vertical), along with metric variants.
Process connections are configurable via option codes:
- -B: B type connections featuring two molded nylon rapid shutoff tubing connectors, one 9 foot length of rubber tubing, and one brass terminal tube.
- -C: C type connections with two 1/8" pipe thread openings.
- -D: D type connections consisting of two compression fittings for 1/4" O.D. copper or aluminum tubing.
- -E: E type connections equipped with two 3-way vent valves, converting from 1/8" NPT to 1/4" metal tubing.
Additional options include -NIST for NIST calibration. Accessories available for the series include model A-101 (1 oz dispenser bottle of red gage fluid, .826 sp. gr.), model A-315 (Gage connector, shutoff type, for 3/16" rubber tubing), and model A339 (Adapter, brass, 1/8" NPT to 3/16" rubber and 1/8" ID plastic tubing).
Key Product Differences
The series distinguishes between inclined manometers (Models 200.5 through 246) and vertical well-type manometers (Models 300, 306, 308, 310). Metric versions are designated with an "M" prefix in the ordering guide.
Physical dimensions vary by model:
- Inclined Models: Dimensions range from Model 201 at 8-1/4 in (20.96 cm) square to Model 246 at 22 in (55.88 cm) square.
- Vertical Models: Dimensions vary by model, such as Model 300 measuring 3-11/16 in x 8-1/4 in and Model 310 measuring 5-5/16 in x 15-1/4 in.
Accessories
accessories
Clear flexible vinyl tubing, 3/16" ID x 5/16" OD, lengths to 500'; 45 psi maximum pressure @ 73°F.
TWD21 / foot
0 In Stock
200200.5201202202.5209215244246300306308310M200M200.5M201M202M202.5M209M215M246M300M306M308M310-B-C-D-E-AT-NIST