Need assistance? Call us: 1-800-663-4209
Series-DPT
Digital Pressure Transmitter, LED Display, Programmable Switches, 3-Way Design
デジタル圧力トランスミッター、LEDディスプレイ、プログラム可能スイッチ、3方向設計- デュアルPNPソリッドステートスイッチ
- 14セグメント赤色LEDディスプレイ
- ユーザーフレンドリーで直感的な3キー操作
- 回転設計:330°ディスプレイ回転、180°ディスプレイ電子回転
Series-DPT
From
¥
233,108
Product Overview
- 精度 ± 1 %
- 精度の詳細 1.0% FS(非直線性、ヒステリシス、ゼロ点を含む)
- 応用例 産業および製造業, ポンプ制御
- 破裂圧力 最大75 psi
- 表示に関する注意事項 赤色LED 4桁(数字高さ0.35インチ)
- 表示タイプ LED
- 電気接続 M12 5ピン オス
- エンクロージャーの定格 IP67
- ループ抵抗 ≤ 0.5k
- 材料 316Lステンレススチール、グラスファイバー強化プラスチック
- 材料、湿潤 316Lステンレス鋼
- 対応媒体 クリーンな乾燥空気 / 不活性ガス, プロセス水/冷却水, 適合する液体, 不活性/非反応性ガス, 油/潤滑油, 有機溶剤
- 取付方向 位置感応ではない
- 桁数 4
- 動作温度(最高) 176 °F
- 動作温度(最低) 32 °F
- 出力詳細 4 to 20 mA
- 消費電力 <100 mA
- 圧力タイプ ゲージ
- プロセス接続サイズ 1/4インチ
- プロセス接続タイプ NPT オス
- 耐圧力 最大30 psi
- シリーズID Series-DPT
- 電源タイプ DC
- 供給電圧 15から35Vdc
- スイッチ定格 250 mA
- スイッチタイプ PNP
- 熱効果 0.2% FS/10k
- 重量 0.2 kg
Supported Applications
The Dwyer Series DPT Digital Pressure Transmitter with Switches is designed for monitoring compatible gases, liquids, or vapors. The unit combines a large, 14-segment LED display with two programmable solid-state switches in a compact housing. Its unique 3-way rotating design allows the display and electrical connection to be rotated independently to maximize visibility while orienting the cable connector for specific installation requirements.
Operating Conditions & Performance
The Series DPT utilizes thin-film piezoresistive sensor technology with an accuracy of 1.0% F.S., which includes non-linearity, hysteresis, and zero point. The transmitter operates within ambient and process temperature limits of 32 to 176°F (0 to 80°C). It features a thermal effect rating of 0.2% FS/10 k.
Pressure ranges span from -14.5 to 0 psig up to 0 to 1000 psig, with specific maximum and burst pressures defined by the model range. The unit carries an IP67 enclosure rating and is approved under CE standards. Power requirements are specified as 15 to 35 VDC.
Configuration Options
The series offers configurable output signals, process connections, wetted materials, and display options tailored to specific measurement needs:
- Output Signals: Models are available as DPT-A for 4 to 20 mA or DPT-V for 0 to 10 VDC.
- Process Connection: Standard connection is a 1/4" male NPT.
- Wetted Materials: The pressure connection and sensor are constructed from 316 L SS. For ranges above 150 psi, the pressure sensor material is specified as 13-8 PH stainless steel.
- Housing Construction: Features a 316 L lower body with a heat and chemical resistant fiberglass reinforced plastic (PBT) head, TPE-E keyboard, and PC display window.
- Electrical Connection: Circular connector M12x1, 5-pin.
- Switch Configuration: Two programmable solid-state switches support Hysteresis Function (normally open/closed) or Window Function (normally open/closed). Switch delay times are configurable from 0 to 50 seconds for both switch and reset points.
The display is a red LED with 4-digit, 0.35" H digits that can be rotated 180° via the DISR parameter. Display units include BAR, MPA, KPA, PSI, or KG/cm² depending on order configuration and range limits.
Key Product Differences
The Series DPT is differentiated by output type (DPT-A vs. DPT-V) and pressure range codes:
- DPT-A Models: Provide a 4 to 20 mA analog signal with a load resistance of ≤ 0.5k.
- DPT-V Models: Provide a 0 to 10 VDC output signal requiring a load resistance > 10k.
Range codes correspond to specific pressure spans, such as code "00" for -14.5 to 0 psig and code "10" for 0 to 1000 psig. Optional accessories include a NIST traceable calibration certificate (NISTCAL-PT1) and a 6' (2 m) shielded cable with female M-12 connections (A-195).