한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
Series-DFMT
デジタルパドルホイール流量トランスミッター、4-20 mA/パルス出力、コンパクトディスプレイ
- 大型バックライト付きLCDディスプレイは、瞬時流量および累積流量を定義し、最大流量のパーセントを示す視覚的インジケーターバーを備えています
- 高精度パドルホイール技術と耐腐食性PVDFセンサーによる長寿命運転
- トータライザーはいつでもユーザーがリセット可能で、単一バッチのトータル化に最適です
- セキュリティパスワード保護により、無断変更を防止します
제품 개요
- 精度 ± 1.5 %
- 表示に関する注意事項 2.38 x 1.25˝(60.33 x 31.75 mm)LCD、積算表示 最大値:9,999,999,999
- 表示タイプ LCD
- 電気接続 着脱式ネジ端子
- エンクロージャーの定格 IP65
- 材料 ABS
- 材料、湿潤 セラミック, フルオロシリコー, PVDF
- 対応媒体 プロセス水/冷却水, 適合する液体, 油/潤滑油, 有機溶剤
- 動作温度(最高) 149 °F
- 動作温度(最低) -4 °F
- 出力詳細 アナログ:4-20 mA(最大ループ抵抗750 Ω);パルス:NPN方形波出力;周波数:0~2 kHz(調整可能);パルス幅:0~1000 ms(調整可能)
- 出力信号 電流、DCパルス
- 消費電力 2 W
- 圧力限界 最大145 psiまで
- プロセス接続タイプ NPT オス
- プロセス温度(最高) 194 °F
- プロセス温度(最低) -4 °F
- 繰り返し精度 ±0.5%
- シリーズID Series-DFMT
- 電源タイプ DC
- 供給電圧 12から24 Vdc
Supported Applications
The Series DFMT Digital Paddlewheel Flow Transmitter provides instantaneous and totalizing flow monitoring for commercial and industrial systems. The unit is designed to measure compatible clean liquids using high accuracy paddlewheel technology.
Operating Conditions & Performance
The series operates within a process temperature range of -4 to 194°F (-20 to 90°C) and an ambient temperature range of -4 to 149°F (-20 to 65°C). It is rated for pressures up to 145 psi (1.0 MPa). Performance specifications include an accuracy of ±1.5% FS and repeatability of ±0.5% FS.
Measurement ranges vary by model, spanning from 0.44 to 7.93 GPM (0.1 to 1.8 m³/h) up to 8.81 to 176.11 GPM (2 to 40 m³/h). The unit features a large backlit LCD display with resolution of up to 3 decimal points for both flow and totalization units, supporting a maximum totalizing value of 9,999,999,999.
Installation notes indicate that accuracy can be affected by disturbances such as pumps, elbows, tees, and valves. Recommended straight pipe runs are provided in the documentation. The meter should be mounted in a full flow pipe; vertical mounting is acceptable if liquid flows through the meter or sufficient back pressure exists on downward flow.
Configuration Options
The Series DFMT offers configurable process connections and output signals to accommodate specific system requirements.
- Process Connections: Available in 3/8" NPT, 1/2" NPT, 3/4" NPT, 1" NPT, 1-1/2" NPT, and 2" NPT sizes.
- Output Signals: User selectable between Analog (4 to 20 mA with 750 Ω max. loop resistance) or Pulse output (NPN square wave). The pulse frequency is adjustable from 0 to 2 kHz, and the pulse width is adjustable from 0 to 1000 ms.
- Power Supply: Requires 12-24 VDC with a power consumption of 2 W.
- Enclosure & Materials: The housing is constructed of ABS plastic with an IP65 enclosure rating. Wetted materials include PVDF for the sensor and impeller, Ceramic for the shaft, and Fluoroelastomer O-rings.
The unit features a removable screw terminal electrical connection. Users can reset the totalizer at any time and set a security password to protect settings from unauthorized changes.
Key Product Differences
The series includes two distinct display configurations: the DFMT with a compact integrated display, and the DFMT2 which utilizes a remote mounting bracket for the display. The DFMT housing dimensions are 3-7/8" [100] x 3-7/8" [100], while the DFMT2 includes a stainless steel remote mounting bracket with a cable length of 197" (5 m) and overall dimensions of 4-1/2" [114.30] x 4-9/16" [115.89].
Model numbers follow the format DFMT or DFMT2 followed by a range code and connection size (e.g., DFMT-10A for 3/8" NPT). Weights vary by model, ranging from 1.06 lb (0.48 kg) for the smallest DFMT unit to 2.43 lb (1.1 kg) for the largest DFMT2 configuration.