1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
ZW-RECIEVER
ZW-REC Récepteur sans fil/serveur web pour transmetteurs UW, ZW et XW
- Consultez vos données où que vous soyez grâce au serveur Web intégré avec cryptage SSL
- Prend en charge jusqu'à 128 émetteurs sans fil des séries ZW, XW ou UW
- S'associe à la mémoire tampon de l'émetteur ZW-ED pour garantir la sécurité des données
- Sortie Ethernet vers PC ou pont Ethernet
ZW-RECIEVER
À partir de
C$
831.16
Aperçu du produit
- Homologations ECCN 5A992, EMC 2014/30/UE, LVD 2014/35/UE, RED 2014/53/UE
- Interface de données USB ; Ethernet ; sans fil
- Remarque sur l'interface de données Ethernet : RJ45, 10/100 Base-T, USB : Micro-USB 2.0 Type B ; Appareils pris en charge, max : 128
- Type d'affichage N/A
- Puissance électrique N/A
- Type de boîtier N/A
- Température de fonctionnement, max 70 °C
- Température de fonctionnement, min 0 °C
- Humidité relative 90 % HR sans condensation
- ID de série ZW-RECIEVER
- Logiciel Compatible avec le tableau de bord OMEGA®
- Approvisionnement Remarque 5 à 30 VCC, 0,8 W, adaptateur secteur qualifié sécurité CA maximum (inclus) : sortie nominale : 9 VCC @ 0,5 A, entrée : 100 à 240 VCC, 50/60 Hz
- Type d'approvisionnement électrique CC
- Tension d'alimentation 5 à 30 Vcc
- Bande sans fil 2,4 GHz
- Échelle sans fil 1000 m
- Échelle sans fil Remarque 2,4 GHz (2400 à 2483,5 MHz), 16 canaux
Le récepteur sans fil OMEGA ZW-REC est conçu pour communiquer jusqu'à 1 000 m* (3 280') à l'extérieur et environ 100 m* (328') à l'intérieur avec divers capteurs/transmetteurs sans fil. Il se connecte directement à votre réseau Ethernet et affiche les données sur la page Web intégrée sans nécessiter de logiciel. Ce serveur Web intégré prend en charge le cryptage pour protéger les données sensibles. Des alarmes par e-mail et SMS peuvent être envoyées à l'aide du logiciel Omega Enterprise Gateway (OEG) en option.
Vous pouvez surveiller et enregistrer toute une échelle de capteurs à distance, notamment des thermocouples, des RTD, des capteurs infrarouges, des capteurs de température ambiante, d'humidité relative et de pression barométrique, via un réseau Ethernet sans logiciel spécial, simplement à l'aide de votre navigateur Web. OMEGA propose une solution système sans fil complète qui répond à un large éventail d'exigences d'application dans divers secteurs, tels que l'aérospatiale, l'agroalimentaire et la recherche en laboratoire.
* Sans obstruction ni interférence.
Transmetteurs sans fil compatibles :
Série XW (XW-ED) : jusqu'à 128 terminaux
Série ZW (ZW-ED) : jusqu'à 128 terminaux
Série UW (UWTC, UWRTD, UWIR, UWRH, UWPH) : jusqu'à 127 terminaux
Homologation : ECCN 5A992 ; CEM 2014/30/UE ; LVD 2014/35/UE ; RED 2014/53/EU ; FCC ID TY0JN5168M5
Remarque : en raison des réglementations relatives aux fréquences de transmission, les produits de la série ZW ne peuvent être utilisés qu'aux États-Unis, au Canada, en Europe, en Chine, au Japon, en Corée et au Brésil.
Un système sans fil complet nécessite au minimum :
Cas 1 : un terminal XW (XW-EDA), un récepteur ZW (ZW-REC) et un ou deux capteurs analogiques (TC/RTD/mA/V)
Exemple : 3 XW-ED, 6 thermocouples de type K et 1 ZW-REC pour un système de mesure de température sans fil à 3 zones
Cas 2 : un terminal ZW (ZW-ED), une sonde numérique (zTPx-P, ZTHPx-P ou zBTx-P) et un récepteur ZW (ZW-REC).
Exemple : 3 ZW-ED, 3 zTP1-P et 1 ZW-REC pour un système de mesure de température sans fil à 3 zones
Cas 3 : un terminal de la série UW (UWTC-x, UWRTD-x, UWIR-x, UWRH-x, UWPH-x) et un récepteur ZW (ZW-REC).
Exemple : UWRH-2 et ZW-REC pour un système RH sans fil complet
PDF & Manuels
Afficher les évaluations et les avis
Rated 1 out of
5
by
Getting bored of this from
Nothing but problems with these devices
I purchaced several of these along with a bunch of the ZW-ED devices. Getting the ZW-ED device to communicate with the ZW-REC device seems to be a near impossibility. When I have talked to the people over at Omegas data acquisition department, I was told that they "no longer support the onboard dashboard" and that I need to use the "Omega Enterprise Dashboard". When I tried to install that software the installer tried to update my internet settings (something I cannot do due to company policy).
The ZW-ED device "connects" to the ZW-REC as in the blue LED indicator blinks 5 times and shuts off indicating a connection per the manual, but doesnt actually connect. I've had devices dead on arrival (it happens I know) and I've had to update firmware right out of the box.
If you want to use these, be ready to put in more time into getting the devices to run than they will actually be running.
Customer support = frequent disconnects (every time i've tried to talk with them) and restarting the troubleshooting process every time you try to reconnect. I'm so tired of explaining the same problem and answering the same questions.
Date published: 2018-04-04
Rated 1 out of
5
by
SSmith from
Software Does Not Recognize Device
After a successful setup, Omega Sync software no longer recognizes the receiver.
Date published: 2021-03-26
Rated 5 out of
5
by
RussPatt1 from
Good things come in small packages
I was looking for some lab quality sensors with access to the internet for a client and come across this device by Omega and was presently surprised at the simplicity of the operation and setup. With built in webserver the client is extremely happy and that goes double for me!
Date published: 2017-02-15
Rated 5 out of
5
by
SUHERTEC from
Good DEVICES
I have been using these devices since the ZSERIES models and they have been with me for a long time.
Date published: 2022-02-06
Rated 3 out of
5
by
Damosluk2020 from
It's OK with Limitations
This device works ok within ~500 ft. You are risking yourself if you do anything more. It is NOT nema 4X so please cover it.
Pros:
- Ethernet Cable, detects transmitter XW easily, not to big.
Cons:
- Add $395 for OEG just to record and scale your signal to psi, gpm, ft/hr, etc.
- Not good for environment agents like water, dust, etc. It isn't covered at all.
- Need ~30 min to setup and better be concentrated for it. 3 softwares to setup and record your transmission.
- Needs outside power source.
- ~500 ft, one signal bar (no obstructions). We couldn't find the perfect position for the advertised 1 mile.
Date published: 2020-10-05
Can this device be configured as a signal repeater to connect two or more receivers and extend the system's range? If not, do you have a device that can work with the ZW-REC to enhance its range?
Thank you for your question. The ZW-REC cannot be used as a repeater, and we do not have any other device that can do so.
Date published: 2023-09-06
Unable to make the charting graph work. Have a ZW receiver along with ZW transmitters. Temperature and humidity values are shown on the End Device Readings page. On the Charting page, it does NOT allow me to select temperature and humidity buttons.
Hello, thank you for your question. In the case of troubleshooting for specific cases, it would be best if you send an email to our technical support team for that series at DAS@OMEGA.COM. Please include screenshots and as much details as possible.
Date published: 2021-07-19