1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
ZW-REC
Récepteur série ZW
Choisir une variante
Fonction de l'appareil
Ajouté à votre panier
Configuration complète.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer pour recommencer
Spécifications du produit
<< Voir tous les modèles de produit| Marque |
 |
| Approvisionnement Remarque | 5 à 30 VCC, 0,8 W, adaptateur secteur qualifié sécurité CA maximum (inclus) : sortie nominale : 9 VCC @ 0,5 A, entrée : 100 à 240 VCC, 50/60 Hz |
| Bande sans fil | 2,4 GHz |
| Fonction de l'appareil | Passerelle |
| Homologations | ECCN 5A992, EMC 2014/30/UE, LVD 2014/35/UE, RED 2014/53/UE |
| Humidité relative | 90 % HR sans condensation |
| ID de série | ZW-RECIEVER |
| Interface de données | USB ; Ethernet ; sans fil |
| Logiciel | Compatible avec le tableau de bord OMEGA® |
| Puissance électrique | N/A |
| Remarque sur l'interface de données | Ethernet : RJ45, 10/100 Base-T, USB : Micro-USB 2.0 Type B ; Appareils pris en charge, max : 128 |
| Température de fonctionnement, max | 70 °C |
| Température de fonctionnement, min | 0 °C |
| Tension d'alimentation | 5 à 30 Vcc |
| Type d'affichage | N/A |
| Type d'approvisionnement électrique | CC |
| Type de boîtier | N/A |
| Valeur brute du poids | 0.88 |
| Échelle sans fil | 1000 m |
| Échelle sans fil Remarque | 2,4 GHz (2400 à 2483,5 MHz), 16 canaux |
| Pays d'origine | Mexico |
| Voir toutes les spécifications | |
PDF & Manuels
Afficher les évaluations et les avis
Rated 1 out of
5
by
Getting bored of this from
Nothing but problems with these devices
I purchaced several of these along with a bunch of the ZW-ED devices. Getting the ZW-ED device to communicate with the ZW-REC device seems to be a near impossibility. When I have talked to the people over at Omegas data acquisition department, I was told that they "no longer support the onboard dashboard" and that I need to use the "Omega Enterprise Dashboard". When I tried to install that software the installer tried to update my internet settings (something I cannot do due to company policy).
The ZW-ED device "connects" to the ZW-REC as in the blue LED indicator blinks 5 times and shuts off indicating a connection per the manual, but doesnt actually connect. I've had devices dead on arrival (it happens I know) and I've had to update firmware right out of the box.
If you want to use these, be ready to put in more time into getting the devices to run than they will actually be running.
Customer support = frequent disconnects (every time i've tried to talk with them) and restarting the troubleshooting process every time you try to reconnect. I'm so tired of explaining the same problem and answering the same questions.
Date published: 2018-04-04
Rated 1 out of
5
by
SSmith from
Software Does Not Recognize Device
After a successful setup, Omega Sync software no longer recognizes the receiver.
Date published: 2021-03-26
Rated 5 out of
5
by
RussPatt1 from
Good things come in small packages
I was looking for some lab quality sensors with access to the internet for a client and come across this device by Omega and was presently surprised at the simplicity of the operation and setup. With built in webserver the client is extremely happy and that goes double for me!
Date published: 2017-02-15
Rated 5 out of
5
by
SUHERTEC from
Good DEVICES
I have been using these devices since the ZSERIES models and they have been with me for a long time.
Date published: 2022-02-06
Rated 3 out of
5
by
Damosluk2020 from
It's OK with Limitations
This device works ok within ~500 ft. You are risking yourself if you do anything more. It is NOT nema 4X so please cover it.
Pros:
- Ethernet Cable, detects transmitter XW easily, not to big.
Cons:
- Add $395 for OEG just to record and scale your signal to psi, gpm, ft/hr, etc.
- Not good for environment agents like water, dust, etc. It isn't covered at all.
- Need ~30 min to setup and better be concentrated for it. 3 softwares to setup and record your transmission.
- Needs outside power source.
- ~500 ft, one signal bar (no obstructions). We couldn't find the perfect position for the advertised 1 mile.
Date published: 2020-10-05