Besoin d'aide? Appelez-nous: 1-800-663-4209
HH508-509
Compteur de température NEMA-4X avec thermocouple K & J à 1 et 2 canaux
Modèles en stock
- Étanche à la poussière NEMA-4X
- Résistant à l'eau/aux éclaboussures
- Signal sonore d'alerte avec réglage Hi/Lo, réglage du temps
- Horloge et temps écoulé
HH508-509
À partir de
C$
281.39
Modèles en stock
Aperçu du produit
- Autonomie de la batterie 200 heures
- Diamètre 53 mm
- Remarque sur l'affichage Nombre de chiffres : 1999
- Type d'affichage Écran LCD rétroéclairé
- Connexion électrique Connecteur miniature mâle Sub-D
- Hauteur 192 mm
- Échelle de mesure de la température, max 1767 °C
- Échelle de mesure de la température, min -210 °C
- Remarque sur la précision de l'humidité relative @ 23 ± 5°C<75% HR
- ID de série HH508-509
- Tension d'alimentation 9 Vcc
- Précision de la température ± 0.1%
- Remarque sur la précision de la température 0,1 % +1 °C
- Résolution de température 0,1 °C
- Note sur la résolution de température 0,1°/1°
- Type de capteur de température Thermocouple
- Type de thermocouple J ; K ; T ; E ; S
- Largeur 91 mm
Thermomètre numérique à entrée simple et double avec écran LCD rétroéclairé. Prend en charge les thermocouples K/J/E/T/S. Dispose des fonctions MAX/MIN, AVG, REL et HOLD. Compact et fiable pour une surveillance de la température de précision. De plus, le HH509 offre des fonctions différentielles T1-T2. Enfin, le HH509R offre toutes les fonctionnalités du HH509, plus une interface RS232, un câble et un logiciel pour l'enregistrement des données et la connectivité PC. Parfait pour une surveillance et une analyse avancées.
PDF & Manuels
Logiciels & Pilotes
Afficher les évaluations et les avis
How often does the HH508 have to be calibrated.
It is recommended the HH508 be checked for calibration at least once per year and adjusted if out of tolerance.
Date published: 2019-11-16
Does the HH509R Come with a NIST Certification
The HH509R does not come with a NIST certificate standard but is optional. The meter will come with a C of C no charge but is not NIST traceable.
Date published: 2025-12-03
Does this unit come calibrated when purchased?
Thank you for your inquiry. Item# HH508 does not come calibrated. Only Item# HH508-CAL-3 comes with the calibration data.
Date published: 2023-02-17
Display will show type K, J,T, and E but not S. Wondering if when type is not displayed is that S?
The HH508 only has icons to highlight for J,K,T and E and if none of these are illuminated then it is set for type S.
Date published: 2020-12-28
the HH509 meter has a reading without the probe connected and reading 28.2 C constant. tried reset the meter via removing the battery , did not work. it was recently calibrated
The meter appears to be reading the internal CJC continuously which may indicate a short circuit. You can jumper between the + and - on the input and if there is no temperature reading change this is most likely the problem and the unit would need to be returned to repair.
Date published: 2024-05-30
If I were measuring a point of contact temperature- I'm trying to measure the exact temperature of a heating element, what probe might I use, and would this be an acceptable model to use for the above application?
Thank you for your inquiry Textiles. Please send an email to temp@omega.com or call 1-888-826-6342 and describe your application.
Date published: 2021-11-03
What probe lengths are available, and what diameter? I need a probe length of approximately 12-inches, 1/4-inch diameter. Thanks
Probe in the picture is 1/8''. Please see attached link for probe with the specs you are looking for: https://www.omega.ca/en/temperature-measurement/temperature-probes/handheld-probes/jhin-rsc/p/KHSS-14U-RSC-12
Date published: 2020-10-28
The spec's say the meter can resolve 0.1°/1°, but the manual doesn't mention how to change display resolution; how is this done?
The HH509 is a 3 1/2 digit display and will have a 0.1 resolution up to 199.9 then automatically change to 1.0 resolution from 200 degrees and above.
Date published: 2021-03-15