Besoin d'aide? Appelez-nous: 1-800-663-4209
SA1
Thermocouples de surface à réponse rapide en polyimide auto-adhésif
Modèles en stock
- Porte-bobine breveté
- Dos autocollant pour une installation facile
- Temps de réponse inférieur à 0,3 seconde
- Câbles isolés PFA de 1 m (36') ou 2 m (72') avec code couleur
SA1
À partir de
C$
191.60
Modèles en stock
Aperçu du produit
- Fonctions supplémentaires 1 Aucun
- Code couleur standard ANSI
- Isolation PFA
- Température minimale du processus 0 °C
- Temps de réponse 0,3 s
- Hauteur du capteur 0.01 in
- Longueur du capteur 1 in
- Largeur du capteur 0.8 in
- ID de série SA1
- Calibre du fil 30 AWG
Les capteurs de température à thermocouple autocollants d'OMEGA ont désormais été améliorés pour inclure le connecteur miniature très apprécié avec notre support de bobine breveté. Le porte-bobine permet de ranger facilement le fil thermocouple qui n'est pas nécessaire pour l'application.
Consultez les tableaux de précision et de code couleur des thermocouples
Afficher les évaluations et les avis
I am working on a study that requires the heat capacity of the thermocouple to be included in the calculation, so can I get how much it is?
Thank you for the inquiry. We do not have a calculated heat capacity unfortunately. But you may be able to calculate given known materials. The adhesive tape used is CHR-K100-Tape-1Mil-PI-TDS-1117.
The single sided glass tape is 0.007” thick.
The double sided SA tape is 0.0045” thick.
The total thickness comes out to 0.020” thick
Dimensions of the pad are located in the manual; https://assets.omega.com/manuals/M0503.pdf
And 2 thermocouple legs extend to the center of the pad. The legs are of thermocouple alloy, 0.010" diameter.
Best regards,
OMEGA
Date published: 2025-12-29
Are these thermocouples resistant to electrical noise? How can I shield these thermocouples?
Hi Varll,
Thank you for the inquiry. The SA1 series have a polyamide film on the top and bottom of the thermocouple element. This insulates the TC from electrical noise via direct contact with process. If you experience electrical noise via RF please contact us for more solutions.
Best regards
OMEGA
Date published: 2024-03-24
Does the adhesive contain silicone?
The PSA is a Silicon based adhesive
Date published: 2021-02-15
With the strain relief option: Would the connector type able to come as Female instead of Male?
Thank you for your inquiry. We can only provide the male connector with the strain relief for this thermocouple.
Date published: 2024-08-01
Are these thermocouples suitable for an outdoor application? Specifically installation on the back of a solar panel for extended periods of time (> 6 months).
Yes, I have used these for that exact application with some Kapton tape on the TC and they work well.
Date published: 2020-05-20
What is the life expectancy in a heat cycling application with 50 psi applied?
Thank you for your inquiry Bob58. These probes are not pressure rated and they have not been tested on pressurized environments. We do not recommend the use of this probe in pressure environments. Life expectancy for any of our of products depends on the frequency the product is used.
Date published: 2023-11-25
Can I use this Thermocouple and connector with the wireless unit SS-002-0-NA?
Thank you for your question. You have to purchase the model thermocouple with stripped leads because SS-002-0-NA has screw terminals for wire connection.
Date published: 2020-09-05
I would like to get the polynomial curves for the SA1 T-type and J-type thermocouples. Where can I find that data?
You can request the ITS-90 Thermocouple Polynomials by sending it to temp@dwyeromega.com and one can be sent to you.
Date published: 2024-06-12