Need assistance? Call us: 1-800-663-4209
PP3-PP6-PP10
Thermocouple Temperature Profile Probes
Models In Stock
PP3-PP6-PP10
From
C$
851.77
Models In Stock
Product Overview
Show Ratings & Reviews
Rated 4 out of
5
by
Forsmann from
Almost Perfect
I have used two of these for some time. would be nice to get a 24" with 6 TC's at 2" apart readings. Having only the 18" or 36" as choices makes it rough to be very versatile.
Date published: 2016-10-12
Is it possible to order a custom probe with 3 sensing points (not evenly spaced) and an outer diameter of 0.125 in? What would be the lead time/cost on a probe like that? I was trying to find the profile probe configuration tool, but cannot find it.
Thank you for the request. We do offer custom profile probes. For review of request, please complete the questionnaire in the spec page;
https://assets.dwyeromega.com/pdf/test-and-measurement-equipment/temperature/sensors/thermocouple-probes/PP3_PP6_PP10.pdf.
We need to review your request before providing cost and lead time.
We no longer maintain an on line configurator for this product.
Date published: 2026-04-24
Is the probe bendable? bend up to 90 degree angle?
Thank you for your inquiry. Profile Probe are NOT bendable.
Date published: 2025-10-21
Can we get multipoint thermocouples (3 sensing points) without lead wires? Only sheath with ceramic connectors coming out directly without lead wires?
Thank you for your inquiry. We do not make profile probes without lead wires.
Date published: 2025-11-04
Is it possible to cut or get this in 28 inches with 10 sensors and type K?
Thank you for the request. We can make these in custom lengths with larger number of thermocouples. Please compete the custom request form for a review of your requested probe.
Best regards
OMEGA
Date published: 2026-06-27
Is it possible to have this built with 12 sensors?
Thank you for the inquiry. Yes, these can be made with 12 sensors. Probes are not bendable.
Best regards
OMEGA
Date published: 2021-03-06
How are these calibrated?
Hi Sjay,
Individual probes are checked before assembly. If you require NIST traceable certification, it must be noted part as of initial request.
Best regards,
OMEGA
Date published: 2024-09-25
What is the spacing and thermal isolation of the sensors?
Thank you for your inquiry. 4.5" Spacing between each sensor. No thermal isolation information available.
Date published: 2021-01-30
Would this work in a 60" continuous oven with the probe perpendicular to direction of travel?
Thank you for the inquiry. Profile probe may work for your application. Please forward request to TEMP@DWYEROMEGA.COM.
Best regards
OMEGA
Date published: 2024-12-19