1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
CNI-CB120SB-Series
Panneau de contrôleur numérique de température et de processus On/Off ou PID
- Contrôleur numérique facile à utiliser avec modes Marche/Arrêt, PID et Rampe/Palier
- Contrôle Ethernet en option avec serveur Web intégré
- Fonctionnement sous 120V
- 12 A (1440 W) nominal, capacité maximale de 15 A.
CNI-CB120SB-Series
À partir de
C$
1,585.97
Aperçu du produit
- Fonctions supplémentaires 1 Capacité 12 A (1 440 W)
- Type d'affichage Écran à 3,5 chiffres
- Hauteur 203 mm
- Type d'entrée Thermocouple ; RTD ; tension ; mA
- Longueur 152 mm
- Type de mesure Courant ; température ; tension
- Nombre de sorties de commande 2
- Nombre d'entrées 1
- Température de fonctionnement, max 55 °C
- Température de fonctionnement, min 0 °C
- Signal de sortie Aucun
- ID de série CNI-CB120SB-Series
- Type d'approvisionnement électrique CA
- Poids 4.53 kg
*Pour découvrir notre toute dernière gamme de contrôleurs avec connectivité Modbus, programmes de rampe et de maintien étendus, entrées universelles et programmation PC simple, rendez-vous sur notre page Série CNPT.*
La série CNI-CB120SB est un panneau de contrôle de température/processus autonome qui offre une conception complète du système de contrôle, éliminant ainsi le besoin de sélectionner, collecter et assembler des composants séparés. Les panneaux préconfigurés sont prêts à être installés et ne nécessitent que le raccordement à l'alimentation électrique, à la charge et au capteur. Ils sont équipés d'un contrôleur OMEGA iSeries à microprocesseur avec des fonctions marche/arrêt, PID et rampe/maintien, ainsi que d'un écran tricolore. Ces panneaux de contrôle sont fournis avec une prise d'entrée pour thermocouple et un connecteur femelle M12 pour les entrées RTD ou de processus. Leur format compact les rend portables ou faciles à monter, même dans des espaces restreints.
D'autres types de thermocouples sont disponibles. Veuillez consulter le générateur de références situé juste en dessous du tableau de commande.
Non disponible à l'exportation vers l'Europe.
PDF & Manuels
Accessoires
accessories
Afficher les évaluations et les avis
Rated 3 out of
5
by
MegA SquisH from
Blends well with my design
I operate a press with this control. I only wish there were more than one input.
Date published: 2017-03-01
Rated 4 out of
5
by
Al_111 from
Useful
It has Been working fine so far. We use them in our test stands.
Date published: 2023-05-07
Rated 1 out of
5
by
chip23 from
Not safe, poorly engineered.
Looking at the documentation and diagrams, this unit has no 3rd party approvals, and I see why. The documentation says it has devices rated 20amps in the manual, yet the rated output for the 120V version is 25 amps. Looking at wiring diagrams, control circuit fusing is in the wrong location, and incorrect style of fuses are used. Either someone needs to review and update the documentation, or the units need to be redesigned by someone who knows control panels.
Date published: 2018-07-17
The id is always error, how can i find the id number? Or can i reset the id? Part Number: CNI-CB120-K. Thank you!
ID error means wrong password is entered. The "universal" password value is "5709" so this will unlock even if you have forgotten the password that was put in.
Date published: 2019-10-30
Hello can the controller be interfaced (r/w) by a third party software via Modbus TCP/IP connection? The third party software would act as the HMI for the operator and wondering if the product allows for this?
Hi SauK,
Thank you for the inquiry. This may be possible. Please refer the the iServer communication manual for the EIT interface protocol and commands the 3rd party software would need to follow.
https://assets.omega.com/manuals/M5023.pdf
Best regards
OMEGA
Date published: 2023-01-14
When I request for return, I was asked serial number, but I can only get the Part No. How to get the serial number? Is that necessary?
Thank you for your inquiry. Not all of our products have serial numbers. Referencing your Omega Order Number should be more than adequate for a Customer Care Rep to issue you an RMA without a serial number.
Date published: 2019-10-29
Can CNI-CB120SB-K-EI interface with Omega Enterprise Gateway Essential (Free Software) by plugging an ethernet cable in to the controller and a computer?
Hi BhavikD,
Yes this can be interfaced with the software.
Best regards
OMEGA
Date published: 2021-08-11
What is the country of origin of this unit?
Thank you for your inquiry. This unit is made in the U.S.A.
Date published: 2024-05-06
Is it possible to change the operating temperature range in any CNI-CB120SB series? I am looking for a max temp of 90-100 degree C
Thank you for your inquiry. The operating temperature range is FIXED. Not Adjustable.
Date published: 2022-10-03
Can this be ordered for a 20 A 250 V connector (NEMA 6-20) 3000 W, 20A oven application?
Thank you for your inquiry. We do not perform modifications on this particular line and would not be able to accommodate this request.
Standard is 20 Amp, 2400 W, 240 VAC. Thank you.
Date published: 2020-01-28