1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
Series-TDS
TDS Thermal Flow Switch for Non-Coating Liquids, Adjustable SPDT Output
Modèles en stock
Series-TDS
Depuis
C$
682.04
Modèles en stock
L'aperçu du produit
- Compliance CE
- Drift 0.5% of setpoint
- Electrical Connection Cable
- Media Compatibility Alkaline solutions, Dilute Acids, Hydraulic Oil, Light Oil, Oil, Solvents, Water, Water-based fluids
- Mounting Orientation None
- Operating Temperature, Max 140 °F
- Operating Temperature, Min 32 °F
- Power Consumption 50 mA
- Pressure Limits Up to 150 psi
- Pressure Limits Note 150 psi (10 bar) @25°C, derated @ 1.667 psi (.113 bar)per °C above 25°C
- Measurement Pressure Type Gauge
- Process Connection Size 3/4 in
- Process Connection Type NPT Male
- Repeatability ± 5%
- Repeatability Note ± 5% of setpoint
- Response Time 1 to 10 s
- Supply Power Type DC
- Supply Voltage 12 to 36 Vdc
- Switch Indication LED for Flow Status
- Switch Rating 60 Vac/60 Vdc @ 1 A
- Switch Type SPDT NO/NC, Selectable
- Velocity, Max 3 ft/s
- Velocity, Min 0.04 ft/s
- Viscosity Range 1 to 200 cPs
- Weight 94 g
- Wire Gauge 22 AWG
The Series TDS Thermal Dispersion Flow Switch offers solid state flow detection of non-coating liquids for pump and process protection. SPDT output allows for interfacing with remote PLC or relay control device. The adjustable switch point is factory calibrated at 0.2 fps with LED indication of flow and calibration status. Units feature selectable NO or NC operation and are not damaged by over-ranging flow velocities.
PDF et manuels
