Need assistance? Call us: 1-800-663-4209
EMH-Heater
Stainless Steel Immersion Heater with Multiple Screw Plug Sizes
Chauffage à immersion en acier inoxydable avec plusieurs tailles de bouchon à vis
Models In Stock
- 1/2, 3/4, and 1 1/4 NPT Screw Plugs
- 316 SS Sheath
- 400 to 1000 W
- 120 and 240 V, 1-Phase
EMH-Heater
From
C$
191.25
Models In Stock
Product Overview
- Form factor Screw Plug Immersion
- Length Under Bushing Hex 6 in
- Number of Phases 1
- Process Connection Type NPT Male
- Screw Plug Material Stainless Steel
- Series ID EMH-Heater
- Sheath Diameter 0.625 in
- Threads Material Stainless Steel
- Tolerance Wattage tolerances - 5 to 10% at rated voltage. Length tolerances - ± 2% with a ± 1/16" minimum
Réchauffeur à immersion EMH en acier inoxydable avec gaine en acier inoxydable 316 d'un diamètre de 0,625 pouce. Disponible avec des bouchons à vis mâles NPT 1/2, 3/4 et 1 1/4. Les options d'alimentation vont d'une échelle de 400 à 1000 W, compatibles avec une alimentation monophasée de 120 et 240 V. Conçu pour un chauffage efficace dans diverses applications industrielles.
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
stephen1 from
works good for boiling water
I have bought several of these things over the years. 400 watts is not a lot of energy, but at 110 volt, this wattage is reasonable. omega sells a 220 version of this thing i have also used. boils water and lasts a long time. i have used these for continuous duty boiling. good part
Date published: 2019-04-17
Rated 5 out of
5
by
Legron from
Perfect Solution!
Hydronic heating system solution done right the first time.
Date published: 2018-05-12
Can these be turned on without being submerged in water? We are having issues with ours being turned on when water is not in the container.
These Heater are designed to work only when submerged and will fail in short order if not. They should be located in a tank were the liquid level never goes below were the full length of the Heater is located.
Date published: 2021-05-04
Curious what the temperature of the heater is? On the 37 w/in2 model.
Our immersion heaters need to be immersed in liquid while powered as to not overheat and fail. Because of the materials used in this heater we recommend a thermostat or controller limit the temperature to 266 deg F.
Date published: 2020-01-22
For the 1000w heater what is the highest temperature the unit will heat up to, if the unit is given full voltage and amps?
The Heater generates 1000 Watt of Heating capacity and the characteristics of what is being heated like gallons and the specific heat of what is being heated will determine the maximum temperature. You can find calculations on line or contact Omega's temperature group at temp@omega.com for assistance.
Date published: 2021-05-17
What is the pressure rating for these heaters
The maximum working pressure for the EMH series Heaters is 100 PSI.
Date published: 2021-09-21