1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
SA1-TH-44000
Capteurs de surface thermistors à réponse rapide en polyimide auto-adhésif
Modèles en stock
- Disponible en configurations 2,252, 3,000, 5,000, 10,000 et 30,000 ohms
- Conception autocollante pouvant être facilement appliquée sur des surfaces planes et courbes
- Plage de température de -80 à 120 °C (-112 à 248 °F)
- Interchangeabilité de ± 0,2 °C Standard
SA1-TH-44000
À partir de
C$
60.24
Modèles en stock
Vous ne trouvez pas le bon modèle ?
Utilisez notre configurateur personnalisé pour affiner votre produit
Aperçu du produit
- Longueur du câble 40 in
- Connexion électrique Fils dénudés
- Isolation PFA
- Température minimale du processus -80 °C
- Longueur du capteur 1 in
- Largeur du capteur 0.75 in
- ID de série SA1-TH-44000
- Type de capteur de température Thermistance
- Calibre du fil 26 AWG
- Type de fil Toronné
L'Omega SA1-TH-44000 est un capteur de surface à thermistance haute vitesse thermistor surface sensor conçu pour mesurer avec précision la température à l'interface entre le capteur et la surface. De construction ultra-fine et doté d'un support en polyimide auto-adhésif, il assure un couplage thermique étroit et une réponse rapide, ce qui le rend idéal pour les surfaces planes ou légèrement courbées où la vitesse et la précision sont essentielles.
Ce capteur de surface à thermistance combine les avantages d'une haute sensibilité, d'une conception robuste et d'une excellente répétabilité, ainsi que la possibilité d'être monté de manière permanente ou décollé et réappliqué. Qu'il s'agisse de surveiller des boîtiers électroniques, des panneaux thermiques, des surfaces de composants ou des conduits CVC, le SA1-TH-44000 permet une lecture fiable de la surface avec un impact minimal sur le système mesuré.
Grâce aux normes de contrôle qualité et de stabilité à long terme d'Omega, le SA1-TH-44000 fournit des mesures fiables dans le temps, même dans des environnements difficiles. C'est un excellent choix lorsque vous avez besoin d'une solution compacte, rapide et précise pour surveiller de manière fiable la dynamique de la température de surface.
PDF & Manuels
Afficher les évaluations et les avis
Rated 5 out of
5
by
Anonymous from
Small foot print, with perfect accuracy
Small footprint with spot on accuracy. The adhesive backing worked perfect against dry copper piping.
Date published: 2021-02-03
Rated 1 out of
5
by
Ben Mike Jones from
Leads need insulation
Thermistor Leads shorted because there is no insulation on them. Also reviewing the review tool used to write this review...it has required fields, why not let the customer determine what information they want to provide with the review.
Date published: 2016-03-11
Can the adhesive film be trimmed with no issues? The footprint is too large for my application.
Thank you for your inquiry. We do not recommend trimming the adhesive pad as it could affect the adhering capability of the sensor.
Date published: 2025-01-27
Where is the full data sheet with the Steinhart-Hart equations? I know it was answered in someone else's question, but there only appears to be one data sheet that is one page long.
Please find equations and constants in following link;
https://assets.omega.com/spec/44000_THERMIS_ELEMENTS.pdf?__hstc=55502388.852a994d37b5ed38d3a14a7ffb2ecc9c.1747873543321.1747933117022.1747937039153.8&__hssc=55502388.5.1747937039153&__hsfp=1623487770
Best regards,
OMEGA
Date published: 2025-05-23
How do you convert the Thermistor resistance into degree Celsius? Do you have the equation? Thank you
You can calculate the temperature by using the Steinhart-Hart equations found on the Thermistor element data sheet. You can use "Thermistor Elements" in the search box to get to the appropriate page.
Date published: 2024-06-14
Hi. Is there a spec drawing of the sensor without the cable? Replacement sensor item number would also be helpful. Thank you.
Thank you for your inquiry. The drawing is available in the data sheet. We do not offer a replacement sensor for these.
Date published: 2024-10-11
Is there a detailed procedure for cementing this product to aluminum?
We have no formal procedure. Basically, please follow the steps below.
1) Peel adhesive backing off of the SA1 sensor.
2) Apply to clean surface.
3) With the SA1 sensor in place, spread your prepared cement mixture over the 'edges' of the SA1 pad and onto the surface being attached to, being sure that there is no 'break' in the cement material between the pad and material surface.
4) Allow to cure according to cement instructions.
Date published: 2020-03-03
Per ISO 13732-1 standard, 5.4.2; The measurement of the surface temperature shall be carried out by means of an electrical thermometer with a contact sensor made of metal and insignificant heat capacity. Does this thermistor have a metal contact sensor?
Thank you for your inquiry. This unit does not have a metal contact surface. Refer to the ON-909 Thermistor Sensors.
Date published: 2024-01-19
Is this product suitable for outdoor applications?
Thank you for your inquiry! Unfortunately, this product is not intended for outdoor use
Date published: 2021-03-18