1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
PR-11
Sonde RTD robuste avec fil isolé et protection contre les contraintes en métal
Modèles en stock
- Capteur RTD PT-100 à usage général, 100 ohms à 0 °C.
- Précision conforme à la norme CEI/DIN classe A (± 0,15 °C à 0 °C)
- Plage de température : -200 à 600 °C
- Coefficient de température : 0,00385 Ohm/Ohm/C nominal
PR-11
À partir de
C$
332.28
Modèles en stock
Vous ne trouvez pas le bon modèle ?
Utilisez notre configurateur personnalisé pour affiner votre produit
Aperçu du produit
- Précision Classe A
- Résistance nominale/courbe Remarque Éléments en platine DIN de classe « A », 100 Ω bobinés à haute précision selon IEC 751 (alpha = 0,00385 Ω/Ω/ºC)
- Type de sonde Transitions de sonde RTD avec renfort de contrainte métallique
- Température maximale du processus 600 °C
- Température minimale du processus -200 °C
- ID de série PR-11
- Matériau de la gaine Acier inoxydable 304
- Coefficient de température 0,00385Ω/Ω/°C
- Remarque sur le coefficient de température α=0,00385Ω/Ω/°C
- Type de sonde de température Sonde à immersion
- Type de capteur de température RTD
- Longueur du joint de transition 1.125 in
- Calibre du fil 26 AWG
- Type de fil Toronné
Sonde RTD à usage général avec jonction de type transition. Livrée avec des fils conducteurs revêtus de PFA de 36 pieds. Les longueurs standard des sondes sont 6, 12, 18 et 24 pouces. Les extrémités dénudées sont standard.
Pour des longueurs de fils supérieures à 36 pieds, veuillez contacter le service commercial.
Pour des longueurs de fils supérieures à 36 pieds, veuillez contacter le service commercial.
PDF & Manuels
Afficher les évaluations et les avis
Rated 3 out of
5
by
Drag from
Good, but fragile
The first one i bought became intermittent after a couple weeks of use. It has a couple of shallow clamp marks from the pass thru fitting and a slight bend to it, but it seems that was enough to do it in.
Bought another and was particularly careful with it, finished testing, still good.
Accurate and responsive, but fragile.
Date published: 2017-06-05
Rated 5 out of
5
by
DDTCM from
Quality Probe
This a good quality probe and performs as expected.
Date published: 2026-02-04
Rated 5 out of
5
by
Jesus P from
Great value for the price!
Very versatile probe for use in high-temperature tests.
Date published: 2025-05-23
Rated 5 out of
5
by
Dconky from
great product
perfect size for our needs..quickly ordered and shipped
Date published: 2023-04-14
Rated 5 out of
5
by
SDBB from
Great Probe
Probe is working great if not bumped against hard object, or terminals soldering is bad to inside the connector. I am not letting anybody else to use that probe to avoid unnecessary breakage and replacement. It is so delicate. Some of them are working great for a long time. Some do not stand to the next calibration date.
Date published: 2020-09-04
Rated 5 out of
5
by
10 pin from
Great Quality
We have used these for years. They work well and are quite durable.
Date published: 2018-09-25
Rated 5 out of
5
by
lbrvivas from
Good product
I bought one and it´s very well, the delivery was very quick and the product was perfect.
Date published: 2018-03-04
I purchased 5 of RTDs PR-11-2-100-1/8-6-E. The temperature readings were 5-9 degC out when connected to CS8DPT controller. Are these RTD need to be calibrated separately? what are Calibration options? calibration frequency?
Thank you for your inquiry. Please contact our Temperature Department or email your questions to temp@omega.com
Date published: 2020-12-02
Hi, is this product's probe waterproof?
Thank you for your inquiry ahnka. Yes, only the sheath itself is waterproof. The transition joint is not waterproof.
Date published: 2022-07-28
What is the tolerance on the sheath outer diameter? I have PR-11-2-100-1/16-6-E and it will be inserted in stainless steel 316 with hole at 0.066" hole +/- 0.005". With calipers I get 0.063" consistently along probe length.
Thank you for your inquiry. The sheath tolerance for a 1/16" diameter probe is ±0.001.
Date published: 2022-11-29
I configured an RTD and this is the part number the configurator gave me PR-11-2-100-1-8-4-E-SB-120. What does the -SB mean?
This means the Steel Braid additional feature. Please feel free to contact our Tech Support any time if you have any further questions. Thank you!
Date published: 2020-09-14
Two questions: 1) Are these compatible with Swagelok compression fittings (on the probe)? 2) Are these bendable at all (even 5-10 deg)?
Thank you for your inquiry SwagelokFan. For the compression fitting to work with the probe the inner diameter of the fitting must match the diameter of the probe. Unfortunately, they are not bendable.
Date published: 2023-08-11