1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
RDXL6SD-USB
Six Channel Handheld Temperature Data Logger and Built-In Rechargeable Battery
Choisir une variante
Type d'accessoire
Ajouté à votre panier
Configuration complète.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer pour recommencer
Spécifications du produit
<< Voir tous les modèles de produit| Marque |
 |
| Autonomie de la batterie | 32 hr |
| Calibre du fil | 28 to 16 AWG |
| Durée d'échantillonnage | 1 to 86,400 sec |
| Facteur de forme | Handheld/Wall Mount |
| Hauteur | 32 mm |
| ID de série | RDXL6SD-USB-Series |
| Interface de données | USB |
| Largeur | 136 mm |
| Longueur | 71 mm |
| Nombre de mesures | 6 |
| Note sur la résolution de température | 0.1° for temperatures below 1000°C or °F, 1° for temperatures above 1000°C or °F |
| Poids | 200 g |
| Précision de la température | ± 0.1% |
| Remarque sur le poids | 200 g (7 oz) without thermocouples |
| Remarque sur le type de capteur de température | TC, RTD |
| Résolution de température | 0.1 °C |
| Temps d'échantillonnage Remarque | 1 to 86,400 seconds (1 day) |
| Température de fonctionnement, max | 50 °C |
| Température de fonctionnement, min | 0 °C |
| Type d'accessoire | N/A |
| Type d'affichage | LCD |
| Type d'affichage Remarque | 72 mm (2.83") resistive touch TFT, 320 x 240 pixels, backlit |
| Type d'approvisionnement électrique | Battery |
| Type d'entrée | Thermocouple, RTD |
| Type de capteur de température | RTD or Thermocouple |
| Type de mesure | Temperature |
| Unités de mesure de l'affichage | °C, °F |
| Valeur brute du poids | 1.03 |
| Pays d'origine | United Kingdom |
| Voir toutes les spécifications | |
PDF & Manuels
Logiciels & Pilotes
Accessoires
Adaptateur d'alimentation 5 Vcc de rechange pour RDXL6SD-USB UNIQUEMENT
C$85.68 / each
6 En stock
Afficher les évaluations et les avis
Rated 4 out of
5
by
FrankM from
Decent
We bought a couple of these, they do a good job of logging data. The graph is not super usable at least in firmware version 1.01. When the temperature is set to Fahrenheit it the graph displays it as 32° lower than it actually is. The graph also really needs a zoom feature that can be either dynamic or user controlled. Right now you can change how many seconds per graph pixel but if you change it it erases everything already on the graph. You can kind of scroll through the graph but this is rather buggy.
It would also be great if we could put it into a mode where it logs voltage and resistance directly.
Looking at the literature I was under the impression that the RTD would only work for PT100 sensors but in the settings it can be configured for PR200 500 and 1000 as well which I wish I had realized before ordering my sensors.
It logs directly onto an included full sized SD card as a CSV file which is well formatted for excel to understand along with timestamps. If you pull the SD card while logging and then re-insert it it will continue logging but will not fill in any data points from the time the card was out. It would be nice if the SD card had a cover over it to prevent you from accidentally popping the card out.
The SD card cannot be read from USB, instead a USB serial bridge get's installed that has a few mod-bus instructions allowing you to poll the device for data (including the raw voltage and resistance values) you cannot access any logged values you can only get values in real time.
If you plug in or unplug the power the unit continuities working without missing a beat (unlike the HH306A and it's ilk that irrevocably erases all data every time you look at the power connector even though it has a battery and can operate under battery)
It comes with a kickstand that feels like it will break soon. I wish it had a tripod mount instead.
Date published: 2018-10-23
Rated 4 out of
5
by
EL1070 from
Works great for what it is
This is a handy little tool for recording TC's in spots where you don't have any power, just make sure you have fresh batteries in it. Although it has 6 inputs you can only use TC's in 4 of them.
You have to have a SD card reader to extract the data as you can't read the logged over a USB cord form the device. The csv file is great for importing into excel and graphing.
Date published: 2019-09-27
Rated 5 out of
5
by
Bob APE from
Good product
Works well. Good and easy to use GUI. Data transfer from CSV to excel works well too.
Date published: 2024-12-30
Rated 5 out of
5
by
CPL Systems from
Compact
Nice compact unit , easy to use , great bright display
Date published: 2024-09-06