1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
CNI-CB120-K-Series
Panneau de contrôle de température autonome avec contrôleur à microprocesseur
- Contrôleur numérique facile à utiliser avec modes Marche/Arrêt, PID et Rampe/Palier
- Disponible en modèles 120 ou 240 Vac
- Contrôle Ethernet optionnel avec serveur web intégré
- Fonctionnement 120V (240V en option)
CNI-CB120-K-Series
À partir de
C$
2,210.85
Aperçu du produit
- Sortie de commande 2 relais SPST
- Type d'affichage Écran à 3,5 chiffres
- Hauteur 203 mm
- Type d'entrée Thermocouple ; RTD ; tension ; mA
- Longueur 152 mm
- Type de mesure Courant ; température ; tension
- Nombre de sorties de commande 2
- Nombre d'entrées 1
- Température de fonctionnement, max 55 °C
- Température de fonctionnement, min 0 °C
- Signal de sortie Aucun
- ID de série CNI-CB120-K-Series
- Type d'approvisionnement électrique CA
- Poids 4.53 kg
La série CNI-CB120 est un panneau de contrôle de température/processus autonome qui offre un système complet de contrôle de puissance SSR, éliminant ainsi la nécessité de sélectionner, collecter et assembler des composants séparés. Les panneaux préconfigurés sont prêts à être installés, ne nécessitant que l’alimentation, la charge et le raccordement du capteur. Ils sont équipés d’un contrôleur à microprocesseur OMEGA™ iSeries avec des fonctions marche/arrêt, PID et rampe/maintien, ainsi qu’un affichage tricolore. Ces panneaux de contrôle sont fournis avec une prise d’entrée thermocouple et un connecteur M12 femelle pour les entrées RTD ou processus.
PDF & Manuels
Afficher les évaluations et les avis
Rated 3 out of
5
by
MegA SquisH from
Blends well with my design
I operate a press with this control. I only wish there were more than one input.
Date published: 2017-03-01
Rated 4 out of
5
by
Al_111 from
Useful
It has Been working fine so far. We use them in our test stands.
Date published: 2023-05-07
Rated 1 out of
5
by
chip23 from
Not safe, poorly engineered.
Looking at the documentation and diagrams, this unit has no 3rd party approvals, and I see why. The documentation says it has devices rated 20amps in the manual, yet the rated output for the 120V version is 25 amps. Looking at wiring diagrams, control circuit fusing is in the wrong location, and incorrect style of fuses are used. Either someone needs to review and update the documentation, or the units need to be redesigned by someone who knows control panels.
Date published: 2018-07-17
Can this be ordered for a 20 A 250 V connector (NEMA 6-20) 3000 W, 20A oven application?
Thank you for your inquiry. We do not perform modifications on this particular line and would not be able to accommodate this request.
Standard is 20 Amp, 2400 W, 240 VAC. Thank you.
Date published: 2020-01-28
The id is always error, how can i find the id number? Or can i reset the id? Part Number: CNI-CB120-K. Thank you!
ID error means wrong password is entered. The "universal" password value is "5709" so this will unlock even if you have forgotten the password that was put in.
Date published: 2019-10-30
Hello can the controller be interfaced (r/w) by a third party software via Modbus TCP/IP connection? The third party software would act as the HMI for the operator and wondering if the product allows for this?
Hi SauK,
Thank you for the inquiry. This may be possible. Please refer the the iServer communication manual for the EIT interface protocol and commands the 3rd party software would need to follow.
https://assets.omega.com/manuals/M5023.pdf
Best regards
OMEGA
Date published: 2023-01-14
When I request for return, I was asked serial number, but I can only get the Part No. How to get the serial number? Is that necessary?
Thank you for your inquiry. Not all of our products have serial numbers. Referencing your Omega Order Number should be more than adequate for a Customer Care Rep to issue you an RMA without a serial number.
Date published: 2019-10-29
Can CNI-CB120SB-K-EI interface with Omega Enterprise Gateway Essential (Free Software) by plugging an ethernet cable in to the controller and a computer?
Hi BhavikD,
Yes this can be interfaced with the software.
Best regards
OMEGA
Date published: 2021-08-11
What is the country of origin of this unit?
Thank you for your inquiry. This unit is made in the U.S.A.
Date published: 2024-05-06
Is it possible to change the operating temperature range in any CNI-CB120SB series? I am looking for a max temp of 90-100 degree C
Thank you for your inquiry. The operating temperature range is FIXED. Not Adjustable.
Date published: 2022-10-03