Besoin d'aide? Appelez-nous: 1-800-663-4209
SA3
Thermocouples de surface à réponse rapide en polyimide auto-adhésif - Haute température
Modèles en stock
- Support en polyimide
- Dos autocollant
- Zone de jonction de faible masse pour une réponse rapide
- Résistant à de nombreux produits chimiques et huiles
SA3
À partir de
C$
63.31
Modèles en stock
Aperçu du produit
- Fonctions supplémentaires 1 Aucun
- Diamètre du câble 0.04 in
- Température maximale du connecteur 180 °C
- Température minimale du connecteur -29 °C
- Isolation PFA
- Résistance d'isolation 100 MΩ
- Remarque concernant la résistance d'isolation 100 MΩ minimum à 100 Vcc à température ambiante et capteur monté sur surface
- Type de jonction Non mis à la terre
- Température maximale du processus 260 °C
- Température minimale du processus -17 °C
- Hauteur du capteur 0.02 in
- Longueur du capteur 1 in
- Largeur du capteur 0.38 in
- ID de série SA3
- Calibre du fil 30 AWG
Ces thermocouples peuvent être utilisés à l'extérieur et dans des environnements humides, y compris en plein soleil, sans que cela n'affecte leur performance ou leur précision. Nos techniques de construction uniques permettent d'obtenir une jonction thermocouple à réponse rapide dans un support de montage fin et flexible. Ces thermocouples SA3 sont disponibles en deux versions : avec des fils rigides dénudés de calibre 30 AWG ou avec un connecteur miniature à code couleur.
Afficher les évaluations et les avis
In the product details, there is a column called "Minimum Temperature Measurement". The result is in inches.....specifically 36in for the device I ordered. What does that mean?
Thank You for your question.
That is a website error. The length in inches describes the length of the wire being used in for that part in accordance to that part number.
I will submit a ticket in order to have that category title fixed.
Date published: 2022-10-21
What is the accuracy of these SA3-J-120-SRTC?
Thank you for engaging with OMEGA.
The accuracy of the SA3-J is greater of +/- 2.2°C or 0.75%
Date published: 2020-04-23
What is the accuracy of the SA3-K-SRTC? What is the response time of the SA3-K-SRTC?
Thank you for your inquiry. The accuracy of the SA3-K-SRTC is +/- 1.1°C or 0.4% of the reading, whichever is greater. For response time, please email temp@dwyeromega.com
Date published: 2024-07-29
are these well insulated electrically, what if these are pasted on high voltage copper bus bars with voltage up to 500V to 1000V are there any other products that for surface mount application that can be used on copper bsubar with 1000V on it.
Hi Amit,
The adhesive pad is electrically insulative but we do not provide a voltage rating. If applied to a surface with potential the leads should be considered to be at the same potential.
Best regards
OMEGA
Date published: 2020-11-13
What is the accuracy of the SA3-K-120 type thermocouple?
The accuracy of the SA3-K-120 is +/- 2.2 C
Date published: 2024-05-30
1. what is the accuracy of SA3-J-SRTC? 2. what is the response time of SA3-J-SRTC? 2 seconds or 0.3 seconds? Thank you
Surface Thermocouple achieves response times of less than 0.15 seconds.
Date published: 2020-03-17
I want to measure the metal tube surface temperature inside a tube in shell heat exchanger (undergraduate lab). The environment would be steam/water up to about 120 degrees C. Will the SA3 thermocouples function in this environment? Other suggestions?
Thank you for your inquiry Rolf. This probe works on wet environments that don't include the full water immersion and powerful water jets.
Date published: 2022-11-14
Can you get this item already attached to a connector for high temperatures?
This would need to be handled by contacting the Temperature Engineering group directly at temp@omega.com.
Date published: 2021-06-28