1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
Series-RSME
RSME Room Status Monitor – Touchscreen Pressure, Humidity, Temp, Alarm
Models In Stock
- User configurable graphical interface
- Monitors up to 3 rooms with a single unit
- Displays up to 4 parameters including pressure, relative humidity, temperature, air change, and/or door status
- Shallow mounting depth of 1.1" (27.5 mm) allows for flush mount installation in areas with space constraints
- Full color 4.3" touchscreen LCD incorporates color status indication: green for good, yellow for warning, and red for alarm
- Easy-to-clean optional brushed stainless steel bezel
- BACnet MS/TP and Modbus® RTU communication is standard
- Includes RSME, junction box, and USB-C/USB-A flash-drive
Series-RSME
From
C$
$0.00
Models In Stock
Can't find the right model?
Use our custom configurator to fine tune your product
Product Overview
- Alarm 69.1 dB 10 cm from display
- Applications Fluid Measurement and Control, Pharmaceutical
- Data Interface BACnet MS/TP, Modbus RTU
- Display Measuring Units °C, cm w.c., °F, in w.c., kPa, mm w.c., Pa
- Display Note 4.3" (10.9 cm) color TFT LCD, dimmable; 480 x 272 Resolution.
- Display Type LCD
- Electrical Connection Screw Terminal
- Input Control Signal 4 to 20 mA, 0 to 5 Vdc, 0 to 10 Vdc
- Input Control Signal Note Two (2) user-selectable 4-20 mA, 0-5 VDC, or 0-10 VDC; USB type C used for cloning programming; One (1) digital input for door status.
- Materials, Wetted ABS, PMMA
- Measurement Type Current, Voltage, Digital
- Media Compatibility Air
- Operating Temperature, Max 122 °F
- Operating Temperature, Min 32 °F
- Output Detail Current: 4 to 20 mA, Voltage: 0 to 10 Vdc, Digital: 5 A @ 30 Vdc;One (1) digital output (DO) rated 5 A @ 30 VDC; One (1) 4-20 mA or 0-10 V (user selectable) corresponding to internal pressure or retransmission of any input.
- Output Signal Current, Voltage, Digital
- Power Consumption 2.64 W
- Pressure Limits up to 1.5 psi
- Process Connection Note Barbed, fits 1/8˝ and 3/16˝ (3 mm and 5 mm) ID rubber or vinyl tubing.
- Process Connection Size 1/8 in, 3/16 in
- Process Connection Type Barbed Fitting
- Sensor Type Piezoresistive Pressure Sensor
- Supply Power Type AC/DC
- Supply Voltage 24 Vac/Vdc
- Thermal Effects ± 0.02% FS/°F
- Zero Setting Adjustable Range Adjustable via Touchscreen
The Series RSME Room Status Monitor is designed for low differential pressure applications that require stringent pressure monitoring and alarming. It can be configured to monitor positive or negative pressure in clean rooms, hospital isolation rooms, laboratories, and vivariums. The RSME is a complete system with a touchscreen graphical user interface which enables access to pressure, humidity, temperature, air change, security, door status, calibration, and alarm setup. The graphical display color changes allow a clear determination of when the parameters are operating within the acceptable range (green), caution range (yellow), or have gone outside the acceptable operating range (red). The RSME room status monitor comes standard with BACnet MS/TP and Modbus® RTU communications.
Each RSME includes a factory calibration certificate.
Product Applications
- Hospital isolation rooms
- Pharmaceutical facilities
- Dental offices
- School nurse offices
PDFs & Manuals
Accessories
accessories
Clear flexible vinyl tubing, 3/16" ID x 5/16" OD, lengths to 500'; 45 psi maximum pressure @ 73°F.
$0.85
14356 In Stock
Static pressure pickup. For use in clean rooms, 60 micron filter picks up static pressure. Stainless steel wall plate fits 2" x 4" electrical box. Sealed with foam gasket, screws included. Barbed brass fitting holds 1/8" to 3/16" ID tubing.
$14.85
0 In Stock
installation hardware
Room mount with Delta Style plastic enclosure fits 2" x 4" electrical box. 1/8" to 3/16" I.D. tubing
$14.85
0 In Stock
Show Ratings & Reviews
Rated 1 out of
5
by
ADS1 from
Not Robust
We purchased five of these units to monitor room pressure. However, after just a few short weeks, three of these units failed. They would display pressure ranges far outside the pressure ranges they were selected for. After completing the RMA process, it was determined that some chips were burned up on the board citing over voltage. This has been determined impossible on our end as the power supplies are rated for and verified at 24.5 volts DC. Despite this, Dwyer does not recognize that there is a possible internal issue with these devices given how new they are (our serial numbers were in the 300s). Would be nice to have internal protection given the price of these devices.
Date published: 2025-10-31
