1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
LV600-Series
Interrupteurs de contrôle de niveau Pomper Haut/Pomper Bas
Modèles en stock
- Utilisation d'un seul interrupteur pour le contrôle différentiel ou haut/bas
- Différentiel de niveau réglable de 6" à plus de 100'
- Boîtier et câble hermétiquement scellés par moulage par injection plastique
- Modèles circulaires et rectangulaires
LV600-Series
À partir de
C$
86.17
Modèles en stock
Aperçu du produit
- Homologations CE, RoHS
- Isolation PVC
- Plage de détection de niveau 6 à 36 po
- Compatibilité avec les fluides Eau de procédé propre / eau de refroidissement, Huiles / lubrifiants, Solvants organiques
- Pression de Fonctionnement, max 75 psi
- Pression de Fonctionnement Remarque 75 psig à 21°C (70°F) La pression nominale diminue avec l’augmentation de la température.
- Température de fonctionnement, max 50 °C
- Température de fonctionnement, min -25 °C
- Type de raccordement au process UNF femelle
- ID de série LV600-Series
- Puissance nominale du commutateur 15 A à 250 VCA
- Type de commutateur SPDT NO/NC ; sélectionnable
- Poids 0.23 kg
Les interrupteurs à flotteur uniques de la série LV600 offrent un moyen économique de contrôler le niveau de pompage/vidange à l'aide d'un seul interrupteur. La différence ON/OFF est réglée en ajustant la longueur du câble sur laquelle le LV600 peut flotter. Selon que le LV600 flotte avec le câble vers le HAUT ou vers le BAS (voir schéma), le relais de 15 ampères est activé ou désactivé. Le relais change d'état lorsque le LV600 se trouve au-dessus ou en dessous du point fixe de 80 % de la longueur du câble. Par exemple, si le câble est fixé à 3 m (10 pieds) de câble libre, le LV600 se déclenchera à 2,5 m (8 pieds) au-dessus et en dessous du point fixe. Ainsi, les turbulences ne provoquent généralement pas de commutation erronée. Le câble peut être fixé à un tuyau, ou le contrepoids accessoire peut être utilisé en le glissant sur le câble (voir schéma). Le commutateur mécanique SPDT ne contient pas de mercure potentiellement dangereux, est calibré pour 15 A à 250 V CA et peut commuter plus de 100 000 fois. Le relais à micro-interrupteur interne est homologué UL et CSA. Le boîtier et le câble sont hermétiquement scellés par un processus de moulage par injection plastique en deux étapes afin de garantir une étanchéité parfaite.
PDF & Manuels
Afficher les évaluations et les avis
Rated 5 out of
5
by
KDS123 from
Exceptional Product
We have been on the hunt for better "floaters" for our submersible pumps and came across LV600 series. So far it's far superior to what we had been using. Customer service was very knowledgeable and made ordering this simple.
The delivery time as pretty impressive. We received it two days before expected.
Date published: 2019-03-18
Rated 4 out of
5
by
Gary from
Good design
Works good for level control on storage tanks for fill control.
Date published: 2016-10-10
Rated 5 out of
5
by
Steve the Walrus from
Good
Items in stock were delivered fast, back order came in a short while after, great service.
Date published: 2023-11-16
Rated 5 out of
5
by
taylork from
Robust SPDT float switch
This is the second time we have used this float for our application. It was one of the few SPDT float switches our electrician could find that is required for our application. We needed one that had three wires so that it could both disable the pump and a motorized valve. The cord has held up so far in the system we installed it in, which is subject to some corrosive acid gases from the decomposing food waste. The float itself seems more robustly built than others I've used in the past.
Date published: 2022-03-26
Rated 5 out of
5
by
Ed Guy from
Very good product and fast delivery.
the product is really good and works perfect for my application , fast delivery .
Date published: 2021-04-09
Is LV622-N class1 div. 11 compliant?
Thank you for contacting Omega Engineering. The LV622-N is not class 1 div 11 compliant.
Date published: 2019-08-06
1. What are the physical dimensions of the LV622-N float switch end? 2. Specific gravity for this unit states .72. Water is 1.0. Can this unit be used in an outdoor buried water cistern tank (at our cottage)? 3. What angle in deg. does switch activate?
Thank you for your inquiry. 1) The LV622-N is 4.25" in diameter and 2.15" in thickness. 2) This float can be used with fluids that have a specific gravity greater than 0.72 so yes, this float can be used in water. 3) The relay changes state when the LV600 is above or below the fixed point by 80% of the cable length. For example, if the cable is fixed for 3 m (10') of free cable, the LV600 will trigger at 2.5 m (8') above and below the fixed point. Thus, turbulence will generally not cause false switching.
Date published: 2019-09-03
Is this float rated for drinking water applications (NSF61)?
Thank you for your inquiry on the level switches. Unfortunately, it is not rated for NSF61 and do not have any level switches available or rated for that approval.
Date published: 2021-11-04