FMG72B-A

Electromagnetic Low Flow Meter

Cliquez et maintenez pour zoomer

Output Signal

Current DC Pulse

Process Connection Type

NPT Male BSPP Male

Volumetric Flow Rate, Max

15.85 GPM 7.93 GPM 66 GPM

C$3,233.75

Article# FMG72B-A

Qté

Ajouté à votre panier

En stock

Délai de livraison (si pas en stock):5 journées

Brand
Accuracy	± 1.5 %
Accuracy Detail	± 1.5% of reading ± 0.3% range
Conductivity	50 µS/cm
Current, Max	26_ma_approx
Electrical Connection	M12 4 pin Female
Enclosure Ratings	IP65, NEMA Type 4X
Flange Diameter	0.39 in
Flow Indication	LED Green
Flow Indication Note	flow proportional blinking
Load Resistance	250 Ω
Materials	PEEK, Aluminum
Materials, Wetted	EPDM, Stainless Steel
Media Compatibility	Acid Solutions, Conductive Liquids, Saltwater
Number of Outputs	1
Operating Pressure, Max	232 psi
Operating Temperature, Max	70 °C
Operating Temperature, Min	5 °C
Output Detail	Amplified Square Wave
Output Pulse Rate Note	Square wave signal NPN, internal pull-up resistor 2 kΩ pulse duty ratio 50:50
Output Signal	Current
Power Consumption	150 mA
Process Connection Size	1/2 in
Process Connection Type	NPT Male
Process Temperature, Max	90 °C
Process Temperature, Min	0 °C
Repeatability	± 1%
Response Time	< 500 ms
Sensor Diameter	0.375 in
Short-Circuit Protected	< 30 V
Short-Circuit Protected Note	Measures short-circuit proof (up to 30V) and polarity protection (up to -30V)
Supply Power Note	24 Vdc ± 10%
Supply Power Type	DC
Supply Voltage	24 Vdc
Volumetric Flow Rate, Max	15.85 GPM
Volumetric Flow Rate, Min	0.26 GPM
Voir toutes Spécs Montrer moins