Besoin d'aide? Appelez-nous: 1-800-663-4209
HTC
Cordons chauffants en fibre de verre 900 °F max et 120-240 volts Titre de la série de tests
Modèles en stock
- Température d'exposition maximale 482°C (900°F)
- Diamètres enveloppants aussi petits que 3,2 mm (1/8')
- Construction en fibre de verre tricotée et tressée
- Densité de puissance : 0,003 W/mm2 (1,8 W/in2)
- Test Puces de fonctionnalités du test
HTC
À partir de
C$
73.00
Modèles en stock
Aperçu du produit
- Fonctions supplémentaires 1 Convient aux surfaces électriquement conductrices Fonctionnalités supplémentaires 1
- Caractéristiques nominales du boîtier IP5X
- Température d'exposition maximale 482 °C
- Diamètre du réchauffeur 0.125 in
- Largeur du chauffage 0 in
- Isolation Double tresse en fibre de verre
- Direction de sortie du fil conducteur Opposé
- Direction de sortie du fil conducteur Remarque Separable molded plug on each end
- Option de construction du matériau N/A
- Densité de puissance, max 1,8 W/po²
- ID de série HTC
- Type de thermostat Non intégré
- Longueur du fil 24 in
Cordons chauffants en fibre de verre HTC avec une température d'exposition maximale de 900 °F (482 °C) et une plage de tension de 120 à 240 V. Dotés d'une construction en fibre de verre double tressée d'un diamètre de 0,125 pouce, ces cordons sont conçus pour s'enrouler autour de béchers et de tubes. Ils offrent une densité de puissance de 0,003 W/mm² (1,8 W/in²) et un indice de protection IP5X, garantissant une durabilité et un chauffage efficace dans les applications compactes. Description du produit de test
Afficher les évaluations et les avis
is it can be on constantly? Is the condensation of the pipe can damage the heater? Is it applicable to be use with conduct materials ? for example iron or cooper?
The heater can be on constantly. The heater can be wrapped around a metal pipe. The heater should no be used in an environment that the potential of moisture settling on the insulation. Due to the insulation being braided, the moisture could ingress into the heating elements and short the heater.
Date published: 2022-09-06
Can this heat tape be run with a Variac (output 10 Amps, 0 - 100% of 120 V)?
Thank you for your inquiry. Yes you can control this heat tape with a variac.
Date published: 2023-02-17
What controllers should be used with these cord heaters ?
Thank you for your inquiry RPande. Depending on the application, any type of controller that can supply enough power to this heater through the outputs can be used with these heaters. Here is the general link to all the controllers: https://www.omega.com/en-us/control-monitoring/c/controllers. For more detailed questions, please email us at temp@omega.com or call 1-888-826-6342.
Date published: 2022-06-16
Since the title says "120-240V", but there's no 240 V while editing the model, I have to ask just to be sure, can the 120V model of this be used on 240V supplies while reaching the same temperatures? (Since the current is halved basically).
Thank you for your inquiry. Unfortunately, you cannot operate this 120 V heater with a 240 V supply voltage.
Date published: 2023-05-17
Do you have to run a controller or can it receive direct power.
Thank you for your inquiry. This device must be used with a temperature controller. E-mail us at temp@omega.com for suggestions for controller products.
Date published: 2020-08-08
Is it normal for the rope heater to give off smoke when it is first used.
Thank you for your request. This is a common occurrence with fabric, polymide and silicone-based insulated heaters.
Date published: 2021-07-21