1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
RTDCAP
Capsules RTD Platinum
Modèles en stock
- 4 plages de température disponibles
- 100 ou 1000 Ω disponibles
- Capsules en céramique (alumine) ou en plastique
- Plage de 540 °C à plage de 1000 °F
RTDCAP
À partir de
C$
386.29
Modèles en stock
Aperçu du produit
- Précision Classe A
- Précision Classe A (± 0,15 + 0,002*
- Résistance d'isolation >50 MΩ à 50 Vcc
- Remarque concernant la résistance d'isolation Supérieur à 50 Mégohms à 50 VCC à 25°C (77°F)
- Matériau du fil Cuivre nickelé
- Stabilité à long terme 0,05°C (0,02 % de la résistance) par 5 ans, -50 à 300°C, 0,25°C par an jusqu’à 540°C
- Effet d'auto-échauffement >15 mW/°C
- Élément de détection RTD
- ID de série RTDCAP
- Type de capteur de température RTD
- Calibre du fil 28 AWG
Les capsules RTD en platine prêtes à l'emploi sont équipées de fils conducteurs isolés soudés et fixés à l'intérieur. Aucune épissure sur des éléments fragiles n'est nécessaire. Cette construction garantit un encastrement, une insertion ou un assemblage de sonde fiable et robuste. Diamètres des pointes de 0,086 à 0,125". Capteurs standard et matériaux d'encapsulation résistants jusqu'à 540 °C (1 000 °F). Choisissez la version résistante à l'humidité pour les conditions de condensation.
PDF & Manuels
Afficher les évaluations et les avis
Can I trim the leads short without negatively affecting the performance?
Trimming the leads shorter will not affect the RTD's performance.
Date published: 2020-04-23
Does it matter what method I use to terminate these?
The RTDCAP series would be terminated in an uncompensated three terminal connector if the lead needs to be extended. It also can be directly connected to the screw terminals on instruments accepting RTD's.
Date published: 2020-04-23
Hi, Would this be suitable to insert this inside a plastic pipe in which water is flowing to measure the temperature of water? I mean is immersing it inside a flowing water ok?
Thank you for the inquiry. These are not suitable for immersion applications. Please consider the following for this type of application.
https://www.omega.com/en-us/temperature-measurement/temperature-wire-sensors/hsrtd/p/HSRTD-3-100-1-10-3M
Best regards,
OMEGA
Date published: 2024-07-19
What is the recommended minimun hole size for thr probe in steel(0.098"Ø or any other for that matter)? Is thermal paste rcommended? In oilly conditions, sealing off seneor with high temp RTV recommened?
The hole should be drilled so the sensor can be easily be inserted and removed and Thermal paste will enhance the Heat transfer. Make sure the pastes temperature rating is acceptable for the application. Using High Temperature RTV is okay as well to keep oil from seeping in to the drilled out cavity.
Date published: 2021-06-08
I temperature sensing in robot end of arm tooling. Is there high flex cable available for RTDs or can I use any cable?
Thank you for your interest in our product
We do not have a high flex RTD cable. Repeated cable flexing will cause wire breakage
Date published: 2020-04-24