Series-40M2

PID Digital Temp Controller, 3-Digit LED, Modbus, 999°F/537°C, Alarm

(0)

Modèles en stock

Field selectable °F or °C
Universal temperature sensor or transmitter input
Configuration key to quickly load parameters from one unit to another
RS-485 communication
Heating and cooling operation modes
PID control

Voir l'aperçu du produit

Series-40M2

À partir de ^C$ 146.59

Modèles en stock

Acheter des modèles

2 variations disponibles

Voir toutes les options de série ci-dessous

Fiche technique

Aperçu du produit

Applications Food and Beverage, Process Automation and Control
Control Type On/Off,PID Control
Data Interface RS485 Modbus
Display Type 3 Digit LED
Enclosure Ratings IP65
Input Note Sensor Input RTD, thermocouple, thermistor, current, or voltage. 1 digital multipurpose dry contact. Multipurpose Input Dry contact 3.3 V, 1 mA (not available if sensor input is configured for Pt 100, Pt 1000, or Ni 120 3-wire input). Sensor Input Types Current: 0-20 mA/4-20 mA, configurable; Voltage: 0-10 V/2-10 V, configurable; PTC probe: -58 to 302°F (-50 to 150°C); NTC probe: -40 to 230°F (-40 to 110°C); PT100 probe*: -148 to 999°F (-100 to 650°C); PT1000 probe*: -148 to 999°F (-100 to 650°C); Ni120 probe: -112 to 572°F (-80 to 300°C); J T/C*: -130 to 999°F (-90 to 700°C); K T/C*: -130 to 999°F (-90 to 999°C).
Operating Temperature, Max 55 °C
Operating Temperature, Min -5 °C
Output Detail 0-10 VDC or PWM (12-24 VAC/DC model needs to be powered @ 24 VAC/DC for 0-10 VDC or PWM), Relay (K1) Output 16 A in-rush res. @ 250 VAC, SPST, type 1.Dry Contact One multi-purpose, 3.3 V, 1 mA rating.
Series ID Series-40M2
Storage Temperature, Max 70 °C
Storage Temperature, Min -25 °C

The Series 40M2 Digital Temperature Controller accepts a variety of inputs for temperature measurements and set points up to 999°F/537°C. Observing the current status of the controller is made easy with the 3-digit, multi-color LED display that has alarm and output symbols. For added versatility, the temperature units can be field selected for °F or °C. A flashing alarm informs users when the current temperature exceeds preset limits. The On-Off/PID and PID with auto-tuning provide accurate and reliable control in complex applications. The Modbus® protocol TTL slave port can be used to communicate over a TTL/RS-485 interface. When programming multiple units, the 40X2-K programming key is available to reduce setup time.