Series-AT-ADPS

Interrupteur de pression différentielle ATEX/IECEx, 0,08-20 inH2O, à épreuve de flamme

(0)

Flameproof enclosure with optional glass window and aluminum housing protects the device in hazardous areas while giving local visibility to set point status
Increased response time at low pressures with LD port configuration

Voir l'aperçu du produit

Series-AT-ADPS

Depuis ^C$ 0.00

Modèles de boutique

0 variantes disponibles

Voir toutes les options de séries ci-dessous

Fiche technique

L'aperçu du produit

Series ID Series-AT-ADPS

The Series AT-ADPS ATEX/IECEx Approved Differential Pressure Switch is designed for pressure, vacuum, and differential pressure applications in hazardous areas. The dual scaled adjustment knob in inches water column and Pascals allows changes to the switching pressure to be made without a pressure gage. The switch is available with settings from 0.08 in w.c. (20 Pa) up to 20 in w.c. (5000 Pa). The silicone diaphragm makes this series ideal for use with air and other noncombustible gases. Flameproof enclosures are available in aluminum and can include a glass window for viewing set point status on the adjustment knob.

Important notes for installation:
• Cables must be fitted through 1/2" NPT cable gland or ATEX/IECEx conduit (not supplied with instrument).
• Make sure after cabling to close tight cover and cable gland, in order to maintain IP66 rating.
• Open cover only after de-energizing instrument.
Attention: Check local safety rules and warnings on unit and manual for a correct use of the instrument in hazardous areas.

Please see Series ADPS for non-ATEX/IECEx approved.

California Residents: Click Here for Proposition 65 WARNING.