1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
SRT-heaters
Bande chauffante en caoutchouc de silicone 425 °F max et puissance maximale de 2,09 kW
Modèles en stock
- Indice d'exposition continue jusqu'à 450°F
- Distribution uniforme de la chaleur
- Résistant à l'humidité et aux produits chimiques
- Fiche détachable moulée intégralement
SRT-heaters
À partir de
C$
121.35
Modèles en stock
Aperçu du produit
- Rigidité diélectrique au-delà de 2000 V
- Caractéristiques nominales du boîtier IP66
- Température d'exposition maximale 232 °C
- Diamètre du réchauffeur 0 in
- Jauge de l'élément chauffant 36 à 40 AWG
- Jauge de l'élément chauffant Remarque Fil résistif finement multibrin de calibre 36-40
- Isolation Fil de fibre de verre double tressage
- Option de construction du matériau N/A
- Densité de puissance, max 4,3 W/po²
- ID de série SRT-heaters
- Type de thermostat Non intégré
- Calibre du fil 16 AWG
- Remarque concernant le calibre du fil Fil conducteur isolé en caoutchouc de silicone haute température 600V de calibre 16 AWG sortant des extrémités opposées du ruban chauffant vers des côtés séparés d'une fiche détachable moulée intégralement
- Longueur du fil 24 in
Ruban chauffant SRT en caoutchouc silicone avec une température maximale d'exposition continue de 450 °F et une puissance allant jusqu'à 2,09 kW. Il offre une distribution uniforme de la chaleur, une résistance à l'humidité et aux produits chimiques, ainsi qu'une fiche séparable moulée intégralement. Équipé d'un thermostat intégré et d'une fiche à 2 broches, il est conçu pour la protection contre le gel et se connecte facilement aux contrôleurs. L'indice de protection du boîtier IP66 garantit sa durabilité dans les environnements difficiles.
APPLICATIONS
Les rubans chauffants extrudés en caoutchouc silicone peuvent être utilisés en contact direct avec une surface métallique ou conductrice.
Afficher les évaluations et les avis
Rated 5 out of
5
by
Holaco from
Strip Heater
This is a great product easy to wrap around objects you wish to heat up, and the split plug is the real reason my men like using it.
Date published: 2016-07-14
Rated 5 out of
5
by
ASRL from
No messy fibers
Performed as described. This silicone heating tape is much easier to handle than the fiber versions.
Date published: 2021-04-06
Rated 5 out of
5
by
Chip from
Quality Heat Tape
The heat tape is high quality and functions as discribed.
Date published: 2018-01-22
Can this Silicone Rubber Heater Tape be used lying flat on top of Leaf Filter Gutter Protection for gutters to melt icicles from gutters.
Hi Marian,
Thank you for the inquiry. The silicone rubber heaters are not suitable for your application unfortunately. We currently do not offer product designed for this application.
Best regards
OMEGA
Date published: 2021-06-24
What is the thickness of this tape?
Thank you for the inquiry.
The heating tape itself is approx 3/16” thick and the wire connection portion is approx ¼” thick.
Best regards
OMEGA
Date published: 2020-08-08
Can you tell me how to choose for "Lead wire exit direction" and "Termination"? Thank you.
Thank you for your inquiry! The "Lead wire exit direction" specifies where you would like the two leads to emerge from the heater - either both leads on the same side, or one on each end. The "termination" specifies the type of connection style, either stripped lead (bare) wires or a two prong connector for connection to AC mains outlet.
Date published: 2021-05-20
Silicone Rubber Heater Tape have any right side to use?? can I use in both sides of the tape to heat
Thank you for your inquiry Christian. The heater tape can be used on either side. Just make sure you don't overlap the heater over itself for proper operation.
Date published: 2022-07-25