1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
RTD-805-RTD-806
Capteurs de température de l'air RTD de -50 °C à 230 °C avec cages
Modèles en stock
- Pour la surveillance des flux d'air et de gaz Se monte dans n'importe quelle orientation
- L'élément de détection exposé offre des temps de réponse rapides dans l'air
- Disponible avec boîtier en acier inoxydable ou en plastique
- Élément platine DIN de classe « A » haute précision, 100 ohms
RTD-805-RTD-806
À partir de
C$
259.09
Modèles en stock
Aperçu du produit
- Précision Classe A
- Précision Élément en platine de haute précision, 100 Ω, classe « A » selon IEC60751 DIN
- Longueur du câble 40 in
- Matériau du câble Nickel ; cuivre
- Isolation PFA
- Résistance nominale 100 Ω
- Nombre de fils 3
- Diamètre de la sonde 0.5 in
- Longueur de la sonde 1.25 in
- Température maximale du processus 230 °C
- Température minimale du processus -50 °C
- ID de série RTD-805-RTD-806
- Type de capteur de température RTD
- Calibre du fil 26 AWG
- Type de fil Toronné
Description
Capteurs RTD de température de l'air Omega. L'élément de détection RTD à couche mince de platine est exposé au flux d'air tout en étant protégé des débris par un boîtier ventilé (disponible en plastique et en acier). Cette construction utilise un fil conducteur en cuivre nickelé toronné AWG n° 26, isolé au PFA. Cette conception est livrée en standard avec un connecteur miniature à trois broches amovible.
PDF & Manuels
Afficher les évaluations et les avis
Rated 4 out of
5
by
EJKA from
Air Temperature RTD Sensors
good quality product. shipped on time with no hassle.
Date published: 2023-05-01
Is there a schematic diagram that shows with each of the 3 26 AWG goes to on the RTD-805?
Thank you for your inquiry Wade. We do not have a schematic diagram to connect the RTD-805. We would need more information about the device this sensor is being connected to. Please call 1-866-512-7404, ask for Temperature Engineering and speak to one of our temperature engineers over the phone for assistance in connecting this sensor.
Date published: 2022-07-07
I see the steel shield is 13mm, but what is the diameter of the steel stem behind the shield that the wire comes out of?
Hi Dydos,
Thank you for the request. The steel stem diameter is 7/32 inch.
Best regards
OMEGA
Date published: 2023-03-03
How big is the smaller diameter of the sensor? Does the RTD-806-OTP come with the connector separately or attached?
Thank you for your inquiry cnoonan. The probe diameter/housing diameter of RTD-806-OTP is 13 mm (0.5") and the connector comes attached. For any further questions, please email temp@omega.com
Date published: 2022-03-03
Will this plug into my 869C? It has a circular female connection at the top with I think 4 or 5 pinholes.
Thank you for your inquiry. This RTD is supplied with no connector (stripped leads). The 869C handheld meter is supplied with the correct mating connector that you can solder to stripped leads in the field. All wiring instructions can be found in the 869C manual.
Date published: 2021-08-05
What are the pressure limits for this device? What is the response time?
Hi Tim1,
Thank you for the inquiry. We do not offer a pressure rating or response time specification for this product.
Best regards
OMEGA
Date published: 2023-10-29
Two questions: 1.. Omega logger OM-DAQXL does not display calendar dates for 2023 or beyond. Is software update to help with this? 2.. To read the Air Temperature RTD-805, data logger pull-down RTD selection does not show RTD 805. Which selection?
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2023-06-26