Need assistance? Call us: 1-800-663-4209
PX309
General Purpose, Stainless Steel Pressure Transducers
Transducteurs de pression en acier inoxydable à usage général
Models In Stock
- Plages de basse pression de 1, 2 et 5 psi !
- Construction entièrement en acier inoxydable
- Pression relative, absolue, composée ou pression de vide
- Conception robuste à semi-conducteurs
PX309
From
C$
413.83
Models In Stock
Product Overview
- Classe de précision 0,1 % à 0,25
- Fonctions supplémentaires 1 Aucun
- Largeur de bande DC à 1 kHz
- Matériau du boîtier Acier inoxydable 316
- Caractéristiques nominales du boîtier IP65
- Résistance d'isolation 1 MΩ à 25 Vcc
- Cycles de pression 10 millions, minimum
- Pression, min 0 psi
- Remarque concernant la pression Surcharge de pression : -15 à 50 psig et 0 à 1000 psia : 3 fois la pression nominale ou 20 psi, selon la valeur la plus élevée, 100 à 10 000 psig : 2 fois la pression nominale
- Taille du raccordement au process 1/4 po
- Type de raccordement au process NPT mâle
- Temps de réponse <1 ms
- ID de série PX309
- Résistance aux chocs 50 g, 11 ms demi-onde sinusoïdale
- Valeur d'étalonnage du shunt Dans la direction verticale avec raccordement vers le bas, les plages composées sont étalonnées uniquement pour une sortie de pression positive
- Stabilité ± 0,25 %
- Remarque sur la stabilité Stabilité sur 1 an : <0,25 % FS
- Tension d'alimentation 9 à 30 Vcc
- Vibration ± 20 g
- Poids 154 g
Les transducteurs de pression en acier inoxydable de la série PX309 d'OMEGA inférieurs à 100 psi utilisent un capteur en silicium de haute précision protégé par un diaphragme en acier inoxydable rempli d'huile. Les appareils de 100 psi et plus utilisent des jauges de contrainte en silicium liées moléculairement au diaphragme en acier inoxydable. Nos ingénieurs d'application travaillent en étroite collaboration avec nos clients pour personnaliser, concevoir ou créer des produits entièrement nouveaux. Appelez-nous, que vous soyez un équipementier, un fabricant ou un utilisateur final.
Le PX309 est également disponible en configurations métriques ; veuillez consulter le PXM309 pour plus de détails, ou contacter notre département Pression pour plus d'informations.
Le PX309 est également disponible en configurations métriques ; veuillez consulter le PXM309 pour plus de détails, ou contacter notre département Pression pour plus d'informations.
PDFs & Manuals
Accessories
accessories
cables
meters/controllers
1/8 DIN Thermocouple and RTD Panel Meter with Large, Selectable Color Display
$535.94 / each
0 In Stock
1/8 DIN Thermocouple and RTD Panel Meter with Large, Selectable Color Display
$535.94 / each
0 In Stock
Show Ratings & Reviews
Rated 1 out of
5
by
Will L from
Untrustworthy calibrations
Faked calibration certificate (again). Claims to have been calibrated to 10,000psi using calibration equipment that will go to only 6,000psi
Date published: 2024-04-13
Rated 2 out of
5
by
H3rb3rt from
Word of Caution
The product performance was great, but there is a major design flaw. The cable connection option has the cable connected to the body by a nut that if loosened and taken off will break the unit. Whereas the PX409 series differential transducer instead does not have this problem, it has a sealed connection that doesn't allow you to break the unit so easily.
The reason I was attempting to take the nut off in the first place was because it was loose and the unit was dunked under water for cleaning so I was trying to make sure the unit would dry out fully before supplying power to the transducer.
Date published: 2021-04-16
Rated 4 out of
5
by
under pressure from
compact and reliable
Have purchased several of these transducers over the last 10 years and do not recall ever having to replace one due to failure. I usually get the 319 series and my only complaint is that there is no key on the connector to simplify pin alignment. They are also offered a wide range of pressure ratings.
Date published: 2019-04-04
Rated 5 out of
5
by
Park from
Performance
Good quality pressure sensor. Accurate readings, easy installation, and reliable performance.
Date published: 2026-09-06
Rated 5 out of
5
by
Park from
Quality
The pressure sensor appears to be well made and performs reliably. The readings are accurate and stable, and installation was straightforward. Overall, a good product for the intended application.
Date published: 2026-09-06
Rated 5 out of
5
by
Park from
Delivery
Great pressure sensor. It works as expected, is accurate, and was easy to install. Good quality for the price.
Date published: 2026-09-06
Rated 5 out of
5
by
Akshat Raval from
Great Pressure Transducer for Testing
Sure. Since you used the pressure transducer for your engineering test setup, you could write something natural like:
Review title: Great Pressure Transducer for Testing
Review text:
Great product and very easy to use. I purchased this pressure transducer for an engineering test setup, and it has worked very well. The readings are accurate and consistent, and it was straightforward to integrate into our setup. Overall, I’m very satisfied with the quality and performance and would recommend it for pressure testing applications.
Date published: 2026-08-27
Rated 5 out of
5
by
MeritSparky from
Pressure Transducer Absolute pressure (at vacuum)
Works well to convert 0-15psia to 0-5V signal. Note that this is operating well at a deep vacuum.
Date published: 2026-08-14