1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
PFT2
Passages NPT sous vide et sous pression pour sceller des fils et des câbles
Modèles en stock
- Fil de cuivre et thermocouple
- Paires de 1, 2 et 4 fils
- Fil isolé PTFE
- Pression nominale de 10-8 torr/120 psi (8 bar)
PFT2
À partir de
C$
256.04
Modèles en stock
Aperçu du produit
- Zone 4.8 mm²
- Faces planes du boîtier 22.4 mm
- Taux de fuite sous pression 1 x 10⁻⁶ cc d'air/s à 120 psi
- Taux de fuite sous vide moins de 10^⁻¹¹ cc He/s
- Matériaux Laiton
- Montage NPT
- Dégagement gazeux <0,003 % VCM ; <0,34 % perte de poids ; échantillon à 125 °C, surface froide à 25 °C
- Pression, max 120 psi
- Température maximale du processus 120 °C
- Température minimale du processus -40 °C
- ID de série PFT2
- Taille du filetage 1/2 po
- Pression d'aspiration nominale 1 x 10^-8 torr
- Calibre du fil 20 AWG
Assemblages de traversées NPT conçus pour sceller les fils et les câbles dans des environnements sous pression et sous vide. Supporte une pression maximale de 120 psi. Disponible avec des options de thermocouple en alliage isolé PTFE et de fil de cuivre, garantissant des performances fiables dans les applications exigeantes. Idéal pour des traversées électriques sécurisées et étanches.
Afficher les évaluations et les avis
Rated 5 out of
5
by
RJim781 from
Nice Low Temp Vacuum Feed Through
Four feet inside and out - not total. Work great. Will use again.
Date published: 2020-08-17
Rated 4 out of
5
by
mbr1 from
great value
used these several times to provide power into vacuum chambers. Great value!
Date published: 2016-03-05
Rated 5 out of
5
by
Sierra Lobo from
Great Feed Through
Great feed through for a vacuum chamber! Quick shipping too!
Date published: 2023-06-22
Hello, does the thermocouple wire come with a connector, and if so, which type of connector?
The Thermocouple wire runs through the fitting which is filled with epoxy. Each wire has stripped leads and no connector so this would be added by the customer.
Date published: 2024-02-09
Hello. Is the 48 in thermcouple length split equally on both sides of the fitting? Is customization available to shift the wire to have, say, only 6 in on the thread side? Thanks.
There is actually 48" on each side of fitting (a little over 96" total). No customer variations are available.
Date published: 2023-09-06
Hi, Can I use this feedthrough for glove box installation? Do I need an extra bolt for the other side to fix it on the glove box wall? If yes, do you have such a matching bolt? Thank you,
The fitting is a 1/2 NPT male tapered thread. It's designed to be installed into the matching female NPT connect. Typical application would be a pressure vessel with the female mating fitting installed on it. The thread engagement into the female fitting is nominally only the first 4 or 5 threads. You would typically use "plumber's tape" to seal the threads. There is no type of nut available that has NPT threads
Date published: 2021-06-16