1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
OS100E
RS232 Output IR Sensor with Optional Display
Modèles en stock
- -18 to 538°C (0 to 1000°F) Temperature Range
- Adjustable Emissivity from 0.1 to 1.0
- 5 Different Analog Output Models
- LED Display Model Available
OS100E
Depuis
C$
568.39
Modèles en stock
L'aperçu du produit
- Accuracy ± 2 %
- Air Flow rate 1 CFM
- Alarm Deadband 5.5°C (10°F)
- Alarm Setpoint Adjustable, 0 to 100%
- Cable Length 6 ft
- Control Output Open drain
- Data Interface RS232
- Data Interface Note Serial RS232, 2-way
- Emissivity, Max 1
- Emissivity, Min 0.1
- Emissivity Note 0.1 to 1.00, adjustable
- Enclosure Ratings IP65, NEMA Type 4
- Field of view 6:1
- Field of View Note 6:1 (distance/ spot size)
- Housing Height 30.5 mm
- Housing Length 115.3 mm
- Housing Material Aluminum
- Housing Width 65.5 mm
- Laser Output false
- Operating Temperature, Min 0 °C
- Process Temperature, Max 538 °C
- Process Temperature, Min -18 °C
- Relative Humidity, Max 0.95
- Relative Humidity Note Less than 95% RH, non-condensing
- Repeatability ± 1%
- Sensor Diameter 25.4 mm
- Sensor Length 63.5 mm
- Spectral Response, Max 14 μm
- Spectral Response, Min 5 μm
- Supply Voltage 12 to 24 Vdc
- Thermal shock About 30 minutes for 25°C (77°F) abrupt ambient
- Warm-Up Period, Max 3 m
- Warm-Up Period, Min 0 m
- Water Flow Rate 0.25 GPM
- Water Flow Rate Note 0.25 GPM, room temperature
- Weight 272 g
OMEGA’s OS100E Series miniature infrared sensors/transmitters measure a temperature range of -18 to 538°C (0 to 1000°F). They consist of a remotely mounted infrared sensor head connected to a high-performance, microprocessor-based signal conditioner. The miniature sensor head is ideal for measuring temperature in confined, hard-to-reach places and harsh environments. The sensor head is connected to the main electronics housing via a 1.8 m (6') shielded cable. The signal conditioner’s main electronics are mounted in a rugged NEMA 4 (IP65) rated die-cast aluminum housing. Model OS102E includes a built-in LED display that is switchable between °C and °F. Standard features include adjustable emissivity, field-adjustable alarm output, and RS232 PC interface. The unit has analog outputs such as 4 to 20 mA, 0/5 Vdc, 0/10 Vdc, 1 mV/degree, and Type K thermocouple.
Adjustable emissivity from 0.1 to 1 makes the OS100E Series suitable for a wide variety of different material surfaces. Applications such as asphalt, brass, brick, paints/lacquers and much more can be measured. Thermocouple outputs allow for easy convenient replacement of thermocouple contact sensors and don’t require external power source.
PDF et manuels
Logiciels et pilotes